Problems with hardware rendering on i865
Robert Noland
rnoland at FreeBSD.org
Thu Jan 29 05:18:14 PST 2009
On Thu, 2009-01-29 at 00:17 -0800, Kirill Yelizarov wrote:
> Robert,
> I tried tiling off but got another error:
This makes me suspect that something is still wrong with 855 and now
apparrently 865 agp... It may be something wrong with the way the
driver is requesting memory from agp, but I'll still need a debugging
version of agp to figure it out. Which FreeBSD version are you running?
robert.
> (II) Loading /usr/local/lib/xorg/modules//libvgahw.so
> (II) Module vgahw: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 0.1.0
> ABI class: X.Org Video Driver, version 4.1
> (**) intel(0): Depth 24, (--) framebuffer bpp 32
> (==) intel(0): RGB weight 888
> (==) intel(0): Default visual is TrueColor
> (**) intel(0): Option "AccelMethod" "EXA"
> (**) intel(0): Option "DRI" "true"
> (**) intel(0): Option "Tiling" "off"
> (II) intel(0): Integrated Graphics Chipset: Intel(R) 865G
> (--) intel(0): Chipset: "865G"
> (--) intel(0): Linear framebuffer at 0xF0000000
> (--) intel(0): IO registers at addr 0xFFA80000
> (**) intel(0): Using EXA for acceleration
> (II) intel(0): 1 display pipe available.
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Module "ddc" already built-in
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Module "i2c" already built-in
> (II) intel(0): Output VGA using monitor section Sony
> (II) intel(0): I2C bus "DVODDC_D" initialized.
> (II) Loading sub module "sil164"
> (II) LoadModule: "sil164"
>
> (II) Loading /usr/local/lib/xorg/modules/drivers//sil164.so
> (II) Module sil164: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org Video Driver, version 4.1
> (II) intel(0): I2C bus "DVOI2C_E" initialized.
> (II) Loading sub module "ch7xxx"
> (II) LoadModule: "ch7xxx"
>
> (II) Loading /usr/local/lib/xorg/modules/drivers//ch7xxx.so
> (II) Module ch7xxx: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org Video Driver, version 4.1
> (II) intel(0): I2C bus "DVOI2C_E" removed.
> (II) intel(0): I2C bus "DVOI2C_E" initialized.
> (II) Loading sub module "ivch"
> (II) LoadModule: "ivch"
>
> (II) Loading /usr/local/lib/xorg/modules/drivers//ivch.so
> (II) Module ivch: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org Video Driver, version 4.1
> (II) intel(0): I2C bus "DVOI2C_E" removed.
> (II) intel(0): I2C bus "DVOI2C_B" initialized.
> (II) Loading sub module "tfp410"
> (II) LoadModule: "tfp410"
>
> (II) Loading /usr/local/lib/xorg/modules/drivers//tfp410.so
> (II) Module tfp410: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org Video Driver, version 4.1
> (II) intel(0): I2C bus "DVOI2C_B" removed.
> (II) intel(0): I2C bus "DVOI2C_E" initialized.
> (II) Loading sub module "ch7017"
> (II) LoadModule: "ch7017"
>
> ....
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
>
> (II) Loading /usr/local/lib/xorg/modules//libfb.so
> (II) Module fb: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.4
> (II) Loading sub module "exa"
> (II) LoadModule: "exa"
>
> (II) Loading /usr/local/lib/xorg/modules//libexa.so
> (II) Module exa: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 2.4.0
> ABI class: X.Org Video Driver, version 4.1
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Module "ramdac" already built-in
> (II) intel(0): Comparing regs from server start up to After PreInit
> (II) Loading sub module "dri"
> (II) LoadModule: "dri"
>
> (II) Reloading /usr/local/lib/xorg/modules/extensions//libdri.so
> (==) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
> (II) intel(0): Kernel reported 241152 total, 0 used
> (II) intel(0): I830CheckAvailableMemory: 964608 kB available
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 10, (OK)
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 10, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 10, (OK)
> drmOpenByBusid: drmOpenMinor returns 10
> drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> (II) [drm] DRM interface version 1.2
> (II) [drm] DRM open master succeeded.
> (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
> (II) intel(0): [drm] framebuffer mapped by ddx driver
> (II) intel(0): [drm] added 1 reserved context for kernel
> (II) intel(0): X context handle = 0x2
> (II) intel(0): [drm] installed DRM signal handler
> (**) intel(0): Framebuffer compression disabled
> (**) intel(0): Tiling disabled
> (==) intel(0): VideoRam: 131072 KB
> (II) intel(0): Attempting memory allocation with untiled buffers.
> (WW) intel(0): Failed to allocate texture space.
> (II) intel(0): Untiled allocation failed.
> (II) intel(0): Couldn't allocate 3D memory, disabling DRI.
> (II) intel(0): Attempting memory allocation with untiled buffers.
> (II) intel(0): Untiled allocation successful.
> (II) intel(0): Page Flipping disabled
> (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
> (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
> (**) intel(0): Option "MigrationHeuristic" "greedy"
> (**) intel(0): Option "EXANoComposite" "false"
> (II) EXA(0): Offscreen pixmap area of 50135040 bytes
> (II) EXA(0): Driver registered support for the following operations:
> (II) Solid
> (II) Copy
> (II) Composite (RENDER acceleration)
> (==) intel(0): Backing store disabled
> (==) intel(0): Silken mouse enabled
> (II) intel(0): Initializing HW Cursor
> (II) intel(0): xf86BindGARTMemory: bind key 19 at 0x00fdf000 (pgoffset 4063)
> (II) intel(0): xf86BindGARTMemory: bind key 20 at 0x00fe0000 (pgoffset 4064)
> (II) intel(0): xf86BindGARTMemory: bind key 21 at 0x01fd0000 (pgoffset 8144)
> (II) intel(0): Fixed memory allocation layout:
> (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
> (II) intel(0): 0x00020000-0x00024fff: HW cursors (20 kB)
> (II) intel(0): 0x00025000-0x0002cfff: logical 3D context (32 kB)
> (II) intel(0): 0x0002d000-0x0012cfff: fake bufmgr (1024 kB)
> (II) intel(0): 0x00fdf000: end of stolen memory
> (II) intel(0): 0x00fdf000-0x00fdffff: overlay registers (4 kB, 0x0000000011be9000 physical
> )
> (II) intel(0): 0x00fe0000-0x01fcffff: front buffer (16320 kB)
> (II) intel(0): 0x01fd0000-0x04f9ffff: exa offscreen (48960 kB)
> (II) intel(0): 0x08000000: end of aperture
> (II) intel(0): Output configuration:
> (II) intel(0): Pipe A is on
> (II) intel(0): Display plane A is now enabled and connected to pipe A.
> (II) intel(0): Output VGA is connected to pipe A
> (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
> (**) Option "dpms" "true"
> (**) intel(0): DPMS enabled
> (II) intel(0): Set up overlay video
> (II) intel(0): direct rendering: Failed
> (--) RandR disabled
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFIXES
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
> (II) Initializing built-in extension DAMAGE
> (II) Initializing built-in extension XEVIE
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: drmOpenMinor returns 11
> drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> (EE) AIGLX error: Calling driver entry point failed(EE) AIGLX: reverting to software rendering
> (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
> (II) intel(0): Setting screen physical size to 359 x 287
> (II) config/hal: Adding input device AT Keyboard
> (II) LoadModule: "kbd"
>
> Regards,
> Kirill
>
>
>
> --- On Wed, 1/28/09, Robert Noland <rnoland at FreeBSD.org> wrote:
>
> > From: Robert Noland <rnoland at FreeBSD.org>
> > Subject: Re: Problems with hardware rendering on i865
> > To: ykirill at yahoo.com
> > Cc: freebsd-x11 at freebsd.org
> > Date: Wednesday, January 28, 2009, 7:09 PM
> > On Wed, 2009-01-28 at 06:33 -0800, Kirill Yelizarov wrote:
> > > Hi
> > >
> > > I have problems with hardware rendering configuration.
> > I have all recent updates of Releng-7 and ports (xorg-7.4).
> > glxgears shows about 28fps when full screen. How can i
> > enable hardware rendering or i'm just wasting my time
> > with this card? Any hints?
> > >
> > > Thank You,
> > > Kirill
> > >
> > > P.S. Sorry, this letter is big
> > >
> > > Here is dmesg:
> > > Copyright (c) 1992-2009 The FreeBSD Project.
> > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
> > 1991, 1992, 1993, 1994
> > > The Regents of the University of California. All
> > rights reserved.
> > > FreeBSD is a registered trademark of The FreeBSD
> > Foundation.
> > > FreeBSD 7.1-STABLE #0: Wed Jan 28 16:46:24 MSK 2009
> > > root at mysrv.faberlic.com:/usr/obj/usr/src/sys/MYSRV
> > > Timecounter "i8254" frequency 1193182 Hz
> > quality 0
> > > CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.52-MHz
> > 686-class CPU)
> > > Origin = "GenuineIntel" Id = 0xf41
> > Stepping = 1
> > >
> > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> > >
> > Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
> > > Logical CPUs per core: 2
> > > real memory = 1056108544 (1007 MB)
> > > avail memory = 1023971328 (976 MB)
> > > ACPI APIC Table: <INTEL D865GVHZ>
> > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> > > cpu0 (BSP): APIC ID: 0
> > > cpu1 (AP): APIC ID: 1
> > > ioapic0 <Version 2.0> irqs 0-23 on motherboard
> > > netsmb_dev: loaded
> > > kbd1 at kbdmux0
> > > acpi0: <INTEL D865GVHZ> on motherboard
> > > acpi0: [ITHREAD]
> > > acpi0: Power Button (fixed)
> > > acpi0: reservation of 0, a0000 (3) failed
> > > acpi0: reservation of 100000, 3ef00000 (3) failed
> > > Timecounter "ACPI-fast" frequency 3579545 Hz
> > quality 1000
> > > acpi_timer0: <24-bit timer at 3.579545MHz> port
> > 0x408-0x40b on acpi0
> > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff
> > on acpi0
> > > pci0: <ACPI PCI bus> on pcib0
> > > vgapci0: <VGA-compatible display> port
> > 0xec00-0xec07 mem
> > 0xf0000000-0xf7ffffff,0xffa80000-0xffafffff irq 16 at device
> > 2.0 on pci0
> > > agp0: <Intel 82865G (865G GMCH) SVGA controller>
> > on vgapci0
> > > agp0: detected 16252k stolen memory
> > > agp0: aperture size is 128M
> > > drm0: <Intel i865G GMCH> on vgapci0
> > > vgapci0: child drm0 requested pci_enable_busmaster
> > > info: [drm] AGP at 0xf0000000 128MB
> > > info: [drm] Initialized i915 1.6.0 20080730
> > > ... I removed the rest of dmesg to save space
> > >
> > > My xorg.conf:
> > > Section "Module"
> > > Load "dbe" # Double buffer extension
> > > Load "GLcore"
> > > Load "freetype"
> > > Load "glx"
> > > Load "dri"
> > > EndSection
> > >
> > > Section "Files"
> > >
> > FontPath "/usr/local/lib/X11/fonts/winfonts/"
> > >
> > FontPath "/usr/local/lib/X11/fonts/koi8-1/misc/"
> > >
> > FontPath "/usr/local/lib/X11/fonts/koi8-1/75dpi/"
> > > FontPath "/usr/local/lib/X11/fonts/misc/"
> > > FontPath "/usr/local/lib/X11/fonts/URW/"
> > > EndSection
> > >
> > > Section "ServerFlags"
> > >
> > > EndSection
> > >
> > > Section "Monitor"
> > > Identifier "Sony"
> > > HorizSync 31.5 - 85.0
> > > VertRefresh 50-70
> > > Option "DPMS" "true"
> > > EndSection
> > >
> > > Section "Device"
> > > Identifier "I865"
> > > Driver "intel"
> > > VendorName "Intel Corporation"
> > > Option "DRI" "true"
> > > # Option "AccelMethod" "NONE"
> > > Option "AccelMethod" "EXA"
> > > Option "MigrationHeuristic"
> > "greedy"
> > > Option "ExaNoComposite" "false"
> > > EndSection
> > >
> > > Section "Screen"
> > > Identifier "LCD_Screen"
> > > Device "I865"
> > > Monitor "Sony"
> > > DefaultDepth 24
> > >
> > > Subsection "Display"
> > > Depth 24
> > > Modes "1280x1024"
> > > ViewPort 0 0
> > > Virtual 2040 2040
> > > EndSubsection
> > > EndSection
> > >
> > > Section "ServerLayout"
> > > Identifier "Simple Layout"
> > > Option "AIGLX" "true"
> > > Screen "LCD_Screen"
> > > EndSection
> > >
> > > Section "DRI"
> > > Group 0
> > > Mode 0666
> > > EndSection
> > >
> > > Section "Extensions"
> > > Option "Composite" "Enable"
> > > Option "RENDER" "Enable"
> > > Option "DAMAGE" "Enable"
> > > EndSection
> > >
> > >
> > > And here is Xorg log:
> > > X.Org X Server 1.5.3
> > > Release Date: 5 November 2008
> > > X Protocol Version 11, Revision 0
> > > Build Operating System: FreeBSD 7.1-STABLE i386
> > > Current Operating System: FreeBSD mysrv.faberlic.com
> > 7.1-STABLE FreeBSD 7.1-STABLE #0: Wed Jan 28 16:46:24 MSK
> > 2009 root at mysrv.faberlic.com:/usr/obj/usr/src/sys/MYSRV
> > i386
> > > Build Date: 28 January 2009 12:25:29PM
> > >
> > > Before reporting problems, check http://wiki.x.org
> > > to make sure that you have the latest version.
> > > Markers: (--) probed, (**) from config file, (==)
> > default setting,
> > > (++) from command line, (!!) notice, (II)
> > informational,
> > > (WW) warning, (EE) error, (NI) not implemented, (??)
> > unknown.
> > > (==) Log file: "/var/log/Xorg.0.log", Time:
> > Wed Jan 28 17:04:03 2009
> > > (==) Using config file: "/etc/X11/xorg.conf"
> > > (==) ServerLayout "Simple Layout"
> > > (**) |-->Screen "LCD_Screen" (0)
> > > (**) | |-->Monitor "Sony"
> > > (**) | |-->Device "I865"
> > > (**) Option "AIGLX" "true"
> > > (==) Automatically adding devices
> > > (==) Automatically enabling devices
> > > (==) Including the default font path
> > /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/.
> > > (**) FontPath set to:
> > > /usr/local/lib/X11/fonts/winfonts/,
> > > /usr/local/lib/X11/fonts/koi8-1/misc/,
> > > /usr/local/lib/X11/fonts/koi8-1/75dpi/,
> > > /usr/local/lib/X11/fonts/misc/,
> > > /usr/local/lib/X11/fonts/URW/,
> > > /usr/local/lib/X11/fonts/misc/,
> > > /usr/local/lib/X11/fonts/TTF/,
> > > /usr/local/lib/X11/fonts/OTF,
> > > /usr/local/lib/X11/fonts/Type1/,
> > > /usr/local/lib/X11/fonts/100dpi/,
> > > /usr/local/lib/X11/fonts/75dpi/
> > > (==) ModulePath set to
> > "/usr/local/lib/xorg/modules"
> > > (**) Extension "Composite" is enabled
> > > (**) Extension "RENDER" is enabled
> > > (**) Extension "DAMAGE" is enabled
> > > (II) Cannot locate a core pointer device.
> > > (II) Cannot locate a core keyboard device.
> > > (II) The server relies on HAL to provide the list of
> > input devices.
> > > If no devices become available, reconfigure HAL or
> > disable AllowEmptyInput.
> > > (II) Loader magic: 0x81ab3c0
> > > (II) Module ABI versions:
> > > X.Org ANSI C Emulation: 0.4
> > > X.Org Video Driver: 4.1
> > > X.Org XInput driver : 2.1
> > > X.Org Server Extension : 1.1
> > > X.Org Font Renderer : 0.6
> > > (II) Loader running on freebsd
> > > (--) Using syscons driver with X support (version 2.0)
> > > (--) using VT number 9
> > >
> > > (--) PCI:*(0 at 0:2:0) Intel Corporation 82865G
> > Integrated Graphics Controller rev 0, Mem @ 0xf0000000/0,
> > 0xffa80000/0, I/O @ 0x0000ec00/0, BIOS @ 0x????????/65536
> > > (II) System resource ranges:
> > > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> > MX[B]E(B)
> > > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > > [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > > [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > > (II) "extmod" will be loaded by default.
> > > (II) "dbe" will be loaded. This was enabled
> > by default and also specified in the config file.
> > > (II) "glx" will be loaded. This was enabled
> > by default and also specified in the config file.
> > > (II) "freetype" will be loaded. This was
> > enabled by default and also specified in the config file.
> > > (II) "record" will be loaded by default.
> > > (II) "dri" will be loaded. This was enabled
> > by default and also specified in the config file.
> > > (II) LoadModule: "dbe"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/extensions//libdbe.so
> > > (II) Module dbe: vendor="X.Org Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > Module class: X.Org Server Extension
> > > ABI class: X.Org Server Extension, version 1.1
> > > (II) Loading extension DOUBLE-BUFFER
> > > (II) LoadModule: "freetype"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/fonts//libfreetype.so
> > > (II) Module freetype: vendor="X.Org Foundation
> > & the After X-TT Project"
> > > compiled for 1.5.3, module version = 2.1.0
> > > Module class: X.Org Font Renderer
> > > ABI class: X.Org Font Renderer, version 0.6
> > > (II) Loading font FreeType
> > > (II) LoadModule: "glx"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/extensions//libglx.so
> > > (II) Module glx: vendor="X.Org Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > ABI class: X.Org Server Extension, version 1.1
> > > (**) AIGLX enabled
> > > (**) Exporting typical set of GLX visuals
> > > (II) Loading extension GLX
> > > (II) LoadModule: "dri"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/extensions//libdri.so
> > > (II) Module dri: vendor="X.Org Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > ABI class: X.Org Server Extension, version 1.1
> > > (II) Loading extension XFree86-DRI
> > > (II) LoadModule: "extmod"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/extensions//libextmod.so
> > > (II) Module extmod: vendor="X.Org
> > Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > Module class: X.Org Server Extension
> > > ABI class: X.Org Server Extension, version 1.1
> > > (II) Loading extension SHAPE
> > > (II) Loading extension MIT-SUNDRY-NONSTANDARD
> > > (II) Loading extension BIG-REQUESTS
> > > (II) Loading extension SYNC
> > > (II) Loading extension MIT-SCREEN-SAVER
> > > (II) Loading extension XC-MISC
> > > (II) Loading extension XFree86-VidModeExtension
> > > (II) Loading extension XFree86-Misc
> > > (II) Loading extension XFree86-DGA
> > > (II) Loading extension DPMS
> > > (II) Loading extension TOG-CUP
> > > (II) Loading extension Extended-Visual-Information
> > > (II) Loading extension XVideo
> > > (II) Loading extension XVideo-MotionCompensation
> > > (II) Loading extension X-Resource
> > > (II) LoadModule: "record"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/extensions//librecord.so
> > > (II) Module record: vendor="X.Org
> > Foundation"
> > > compiled for 1.5.3, module version = 1.13.0
> > > Module class: X.Org Server Extension
> > > ABI class: X.Org Server Extension, version 1.1
> > > (II) Loading extension RECORD
> > > (II) LoadModule: "intel"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/drivers//intel_drv.so
> > > (II) Module intel: vendor="X.Org Foundation"
> > > compiled for 1.5.3, module version = 2.5.1
> > > Module class: X.Org Video Driver
> > > ABI class: X.Org Video Driver, version 4.1
> > > (II) intel: Driver for Intel Integrated Graphics
> > Chipsets: i810,
> > > i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM,
> > 865G, 915G,
> > > E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35,
> > 965Q, 946GZ,
> > > 965GM, 965GME/GLE, G33, Q35, Q33,
> > > Mobile Intel\u00ae GM45 Express Chipset,
> > > Intel Integrated Graphics Device, G45/G43, Q45/Q43,
> > G41
> > > (II) Primary Device is: PCI 00 at 00:02:0
> > > (II) resource ranges after xf86ClaimFixedResources()
> > call:
> > > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> > MX[B]E(B)
> > > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > > [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > > [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > > (II) resource ranges after probing:
> > > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> > MX[B]E(B)
> > > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > > [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> > > [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> > > [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> > > [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > > [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > > [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> > > [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> > > (II) Loading sub module "vgahw"
> > > (II) LoadModule: "vgahw"
> > >
> > > (II) Loading /usr/local/lib/xorg/modules//libvgahw.so
> > > (II) Module vgahw: vendor="X.Org Foundation"
> > > compiled for 1.5.3, module version = 0.1.0
> > > ABI class: X.Org Video Driver, version 4.1
> > > (**) intel(0): Depth 24, (--) framebuffer bpp 32
> > > (==) intel(0): RGB weight 888
> > > (==) intel(0): Default visual is TrueColor
> > > (**) intel(0): Option "AccelMethod"
> > "EXA"
> > > (**) intel(0): Option "DRI" "true"
> > > (II) intel(0): Integrated Graphics Chipset: Intel(R)
> > 865G
> > > (--) intel(0): Chipset: "865G"
> > > (--) intel(0): Linear framebuffer at 0xF0000000
> > > (--) intel(0): IO registers at addr 0xFFA80000
> > > (**) intel(0): Using EXA for acceleration
> > > (II) intel(0): 1 display pipe available.
> > > (II) Loading sub module "ddc"
> > > (II) LoadModule: "ddc"
> > > (II) Module "ddc" already built-in
> > > (II) Loading sub module "i2c"
> > > (II) LoadModule: "i2c"
> > > (II) Module "i2c" already built-in
> > > (II) intel(0): Output VGA using monitor section Sony
> > > (II) intel(0): I2C bus "DVODDC_D"
> > initialized.
> > > (II) Loading sub module "sil164"
> > > (II) LoadModule: "sil164"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/drivers//sil164.so
> > > (II) Module sil164: vendor="X.Org
> > Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > ABI class: X.Org Video Driver, version 4.1
> > > (II) intel(0): I2C bus "DVOI2C_E"
> > initialized.
> > > (II) Loading sub module "ch7xxx"
> > > (II) LoadModule: "ch7xxx"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/drivers//ch7xxx.so
> > > (II) Module ch7xxx: vendor="X.Org
> > Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > ABI class: X.Org Video Driver, version 4.1
> > > (II) intel(0): I2C bus "DVOI2C_E" removed.
> > > (II) intel(0): I2C bus "DVOI2C_E"
> > initialized.
> > > (II) Loading sub module "ivch"
> > > (II) LoadModule: "ivch"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/drivers//ivch.so
> > > (II) Module ivch: vendor="X.Org Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > ABI class: X.Org Video Driver, version 4.1
> > > (II) intel(0): I2C bus "DVOI2C_E" removed.
> > > (II) intel(0): I2C bus "DVOI2C_B"
> > initialized.
> > > (II) Loading sub module "tfp410"
> > > (II) LoadModule: "tfp410"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/drivers//tfp410.so
> > > (II) Module tfp410: vendor="X.Org
> > Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > ABI class: X.Org Video Driver, version 4.1
> > > (II) intel(0): I2C bus "DVOI2C_B" removed.
> > > (II) intel(0): I2C bus "DVOI2C_E"
> > initialized.
> > > (II) Loading sub module "ch7017"
> > > (II) LoadModule: "ch7017"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/drivers//ch7017.so
> > > (II) Module ch7017: vendor="X.Org
> > Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > ABI class: X.Org Video Driver, version 4.1
> > > (II) intel(0): I2C bus "DVOI2C_E" removed.
> > > (II) intel(0): I2C bus "DVOI2C_E"
> > initialized.
> > > (II) intel(0): I2C bus "DVOI2C_E" removed.
> > > (II) intel(0): I2C bus "DVODDC_D" removed.
> > > (==) intel(0): Write-combining range (0xa0000,0x10000)
> > was already clear
> > > (II) intel(0): I2C bus "CRTDDC_A"
> > initialized.
> > > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > > (II) intel(0): I2C bus "CRTDDC_A"
> > initialized.
> > > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> > registered at address 0xA0.
> > > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> > removed.
> > > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > > (II) intel(0): EDID vendor "SNY", prod id
> > 10096
> > > (II) intel(0): Using hsync ranges from config file
> > > (II) intel(0): Using vrefresh ranges from config file
> > > (II) intel(0): Printing DDC gathered Modelines:
> > > (II) intel(0): Modeline "1280x1024"x0.0
> > 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
> > +vsync (64.0 kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5
> > kHz)
> > > (II) intel(0): Modeline "720x400"x0.0
> > 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5
> > kHz)
> > > (II) intel(0): Modeline "1280x1024"x0.0
> > 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync
> > +vsync (80.0 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> > (60.1 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> > (56.5 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> > (48.4 kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
> > kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
> > kHz)
> > > (II) intel(0): Modeline "1280x1024"x60.0
> > 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync
> > +vsync (63.6 kHz)
> > > (II) intel(0): Modeline "1280x960"x60.0
> > 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
> > (59.6 kHz)
> > > (II) intel(0): EDID vendor "SNY", prod id
> > 10096
> > > (II) intel(0): Output VGA connected
> > > (II) intel(0): Using user preference for initial modes
> > > (II) intel(0): Output VGA using initial mode 1280x1024
> > > (==) intel(0): Write-combining range (0xa0000,0x10000)
> > was already clear
> > > (II) intel(0): detected 128 kB GTT.
> > > (II) intel(0): detected 16252 kB stolen memory.
> > > (==) intel(0): video overlay key set to 0x101fe
> > > (==) intel(0): Intel XvMC decoder disabled
> > > (==) intel(0): Will not try to enable page flipping
> > > (==) intel(0): Triple buffering disabled
> > > (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
> > > (**) intel(0): Display dimensions: (340, 270) mm
> > > (**) intel(0): DPI set to (152, 191)
> > > (II) Loading sub module "fb"
> > > (II) LoadModule: "fb"
> > >
> > > (II) Loading /usr/local/lib/xorg/modules//libfb.so
> > > (II) Module fb: vendor="X.Org Foundation"
> > > compiled for 1.5.3, module version = 1.0.0
> > > ABI class: X.Org ANSI C Emulation, version 0.4
> > > (II) Loading sub module "exa"
> > > (II) LoadModule: "exa"
> > >
> > > (II) Loading /usr/local/lib/xorg/modules//libexa.so
> > > (II) Module exa: vendor="X.Org Foundation"
> > > compiled for 1.5.3, module version = 2.4.0
> > > ABI class: X.Org Video Driver, version 4.1
> > > (II) Loading sub module "ramdac"
> > > (II) LoadModule: "ramdac"
> > > (II) Module "ramdac" already built-in
> > > (II) intel(0): Comparing regs from server start up to
> > After PreInit
> > > (II) Loading sub module "dri"
> > > (II) LoadModule: "dri"
> > >
> > > (II) Reloading
> > /usr/local/lib/xorg/modules/extensions//libdri.so
> > > (==) Depth 24 pixmap format is 32 bpp
> > > (II) do I need RAC? No, I don't.
> > > (II) resource ranges after preInit:
> > > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> > MX[B]E(B)
> > > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > > [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> > > [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> > > [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> > > [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > > [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > > [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> > > [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
> > > (II) intel(0): Kernel reported 241152 total, 0 used
> > > (II) intel(0): I830CheckAvailableMemory: 964608 kB
> > available
> > > drmOpenDevice: node name is /dev/dri/card0
> > > drmOpenDevice: open result is 10, (OK)
> > > drmOpenDevice: node name is /dev/dri/card0
> > > drmOpenDevice: open result is 10, (OK)
> > > drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> > > drmOpenDevice: node name is /dev/dri/card0
> > > drmOpenDevice: open result is 10, (OK)
> > > drmOpenByBusid: drmOpenMinor returns 10
> > > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> > > (II) [drm] DRM interface version 1.2
> > > (II) [drm] DRM open master succeeded.
> > > (II) intel(0): [drm] Using the DRM lock SAREA also for
> > drawables.
> > > (II) intel(0): [drm] framebuffer mapped by ddx driver
> > > (II) intel(0): [drm] added 1 reserved context for
> > kernel
> > > (II) intel(0): X context handle = 0x1
> > > (II) intel(0): [drm] installed DRM signal handler
> > > (**) intel(0): Framebuffer compression disabled
> > > (**) intel(0): Tiling enabled
> > > (==) intel(0): VideoRam: 131072 KB
> > > (II) intel(0): Attempting memory allocation with tiled
> > buffers.
> > > (WW) intel(0): Failed to allocate texture space.
> > > (II) intel(0): Tiled allocation failed.
> > > (II) intel(0): Attempting memory allocation with
> > untiled buffers.
> > > (WW) intel(0): Failed to allocate texture space.
> > > (II) intel(0): Untiled allocation failed.
> > > (II) intel(0): Couldn't allocate 3D memory,
> > disabling DRI.
> > > (II) intel(0): Attempting memory allocation with
> > untiled buffers.
> > > (II) intel(0): Untiled allocation successful.
> >
> > There is some problem on 855 class hardware with agp/drm
> > and tiled
> > buffers. I need to get a debugging build of agp to see if
> > I can figure
> > out what is going on. Try disabling tiled buffers and see
> > if that
> > helps. Option "Tiling" "off" in the
> > Device section.
> >
> > robert.
> >
> > > (II) intel(0): Page Flipping disabled
> > > (II) intel(0): vgaHWGetIOBase: hwp->IOBase is
> > 0x03d0, hwp->PIOOffset is 0x0000
> > > (==) intel(0): Write-combining range (0xa0000,0x10000)
> > was already clear
> > > (**) intel(0): Option "MigrationHeuristic"
> > "greedy"
> > > (**) intel(0): Option "EXANoComposite"
> > "false"
> > > (II) EXA(0): Offscreen pixmap area of 50135040 bytes
> > > (II) EXA(0): Driver registered support for the
> > following operations:
> > > (II) Solid
> > > (II) Copy
> > > (II) Composite (RENDER acceleration)
> > > (==) intel(0): Backing store disabled
> > > (==) intel(0): Silken mouse enabled
> > > (II) intel(0): Initializing HW Cursor
> > > (II) intel(0): xf86BindGARTMemory: bind key 11 at
> > 0x00fdf000 (pgoffset 4063)
> > > (II) intel(0): xf86BindGARTMemory: bind key 12 at
> > 0x00fe0000 (pgoffset 4064)
> > > (II) intel(0): xf86BindGARTMemory: bind key 13 at
> > 0x01fd0000 (pgoffset 8144)
> > > (II) intel(0): Fixed memory allocation layout:
> > > (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128
> > kB)
> > > (II) intel(0): 0x00020000-0x00024fff: HW cursors (20
> > kB)
> > > (II) intel(0): 0x00025000-0x0002cfff: logical 3D
> > context (32 kB)
> > > (II) intel(0): 0x0002d000-0x0012cfff: fake bufmgr
> > (1024 kB)
> > > (II) intel(0): 0x00fdf000: end of stolen
> > memory
> > > (II) intel(0): 0x00fdf000-0x00fdffff: overlay
> > registers (4 kB, 0x000000000823b000 physical
> > > )
> > > (II) intel(0): 0x00fe0000-0x01fcffff: front buffer
> > (16320 kB)
> > > (II) intel(0): 0x01fd0000-0x04f9ffff: exa offscreen
> > (48960 kB)
> > > (II) intel(0): 0x08000000: end of aperture
> > > (II) intel(0): Output configuration:
> > > (II) intel(0): Pipe A is on
> > > (II) intel(0): Display plane A is now enabled and
> > connected to pipe A.
> > > (II) intel(0): Output VGA is connected to pipe A
> > > (II) intel(0): RandR 1.2 enabled, ignore the following
> > RandR disabled message.
> > > (**) Option "dpms" "true"
> > > (**) intel(0): DPMS enabled
> > > (II) intel(0): Set up overlay video
> > > (II) intel(0): direct rendering: Failed
> > > (--) RandR disabled
> > > (II) Initializing built-in extension MIT-SHM
> > > (II) Initializing built-in extension XInputExtension
> > > (II) Initializing built-in extension XTEST
> > > (II) Initializing built-in extension XKEYBOARD
> > > (II) Initializing built-in extension XINERAMA
> > > (II) Initializing built-in extension XFIXES
> > > (II) Initializing built-in extension RENDER
> > > (II) Initializing built-in extension RANDR
> > > (II) Initializing built-in extension COMPOSITE
> > > (II) Initializing built-in extension DAMAGE
> > > (II) Initializing built-in extension XEVIE
> > > drmOpenDevice: node name is /dev/dri/card0
> > > drmOpenDevice: open result is 11, (OK)
> > > drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> > > drmOpenDevice: node name is /dev/dri/card0
> > > drmOpenDevice: open result is 11, (OK)
> > > drmOpenByBusid: drmOpenMinor returns 11
> > > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> > > (EE) AIGLX error: Calling driver entry point
> > failed(EE) AIGLX: reverting to software rendering
> > > (II) AIGLX: Loaded and initialized
> > /usr/local/lib/dri/swrast_dri.so
> > > (II) GLX: Initialized DRISWRAST GL provider for screen
> > 0
> > > (II) intel(0): Setting screen physical size to 359 x
> > 287
> > > (II) config/hal: Adding input device AT Keyboard
> > > (II) LoadModule: "kbd"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/input//kbd_drv.so
> > > (II) Module kbd: vendor="X.Org Foundation"
> > > compiled for 1.5.3, module version = 1.3.2
> > > Module class: X.Org XInput Driver
> > > ABI class: X.Org XInput driver, version 2.1
> > > (**) AT Keyboard: always reports core events
> > > (**) Option "Protocol" "standard"
> > > (**) AT Keyboard: Protocol: standard
> > > (**) Option "AutoRepeat" "500 30"
> > > (**) Option "XkbRules" "base"
> > > (**) AT Keyboard: XkbRules: "base"
> > > (**) Option "XkbModel" "pc105"
> > > (**) AT Keyboard: XkbModel: "pc105"
> > > (**) Option "XkbLayout" "us,ru"
> > > (**) AT Keyboard: XkbLayout: "us,ru"
> > > (**) Option "XkbVariant"
> > ",winkeys"
> > > (**) AT Keyboard: XkbVariant: ",winkeys"
> > > (**) Option "XkbOptions"
> > "grp:ctrl_shift_toggle,grp_led:scroll"
> > > (**) AT Keyboard: XkbOptions:
> > "grp:ctrl_shift_toggle,grp_led:scroll"
> > > (**) Option "CustomKeycodes" "off"
> > > (**) AT Keyboard: CustomKeycodes disabled
> > > (II) XINPUT: Adding extended input device "AT
> > Keyboard" (type: KEYBOARD)
> > > (II) config/hal: Adding input device PS/2 Mouse
> > > (II) LoadModule: "mouse"
> > >
> > > (II) Loading
> > /usr/local/lib/xorg/modules/input//mouse_drv.so
> > > (II) Module mouse: vendor="X.Org Foundation"
> > > compiled for 1.5.3, module version = 1.4.0
> > > Module class: X.Org XInput Driver
> > > ABI class: X.Org XInput driver, version 2.1
> > > (**) PS/2 Mouse: Device: "/dev/psm0"
> > > (==) PS/2 Mouse: Protocol: "Auto"
> > > (**) PS/2 Mouse: always reports core events
> > > (**) Option "Device" "/dev/psm0"
> > > (==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50
> > > (**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
> > > (**) Option "EmulateWheel" "true"
> > > (**) Option "EmulateWheelButton"
> > "2"
> > > (**) Option "EmulateWheelTimeout"
> > "200"
> > > (**) Option "XAxisMapping" "4 5"
> > > (**) PS/2 Mouse: XAxisMapping: buttons 4 and 5
> > > (**) Option "YAxisMapping" "6 7"
> > > (**) PS/2 Mouse: YAxisMapping: buttons 6 and 7
> > > (**) PS/2 Mouse: EmulateWheel, EmulateWheelButton: 2,
> > EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> > > (**) PS/2 Mouse: Buttons: 11
> > > (**) PS/2 Mouse: Sensitivity: 1
> > > (II) XINPUT: Adding extended input device "PS/2
> > Mouse" (type: MOUSE)
> > > (II) PS/2 Mouse: SetupAuto: hw.iftype is 3, hw.model
> > is 10
> > > (II) PS/2 Mouse: SetupAuto: protocol is ExplorerPS/2
> > > (II) PS/2 Mouse: ps2EnableDataReporting: succeeded
> > > (WW) fcntl(12, O_ASYNC): Inappropriate ioctl for
> > device
> > > (II) intel(0): I2C bus "CRTDDC_A"
> > initialized.
> > > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > > (II) intel(0): I2C bus "CRTDDC_A"
> > initialized.
> > > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> > registered at address 0xA0.
> > > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> > removed.
> > > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > > (II) intel(0): EDID vendor "SNY", prod id
> > 10096
> > > (II) intel(0): Using hsync ranges from config file
> > > (II) intel(0): Using vrefresh ranges from config file
> > > (II) intel(0): Printing DDC gathered Modelines:
> > > (II) intel(0): Modeline "1280x1024"x0.0
> > 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
> > +vsync (64.0 kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5
> > kHz)
> > > (II) intel(0): Modeline "720x400"x0.0
> > 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5
> > kHz)
> > > (II) intel(0): Modeline "1280x1024"x0.0
> > 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync
> > +vsync (80.0 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> > (60.1 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> > (56.5 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> > (48.4 kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
> > kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
> > kHz)
> > > (II) intel(0): Modeline "1280x1024"x60.0
> > 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync
> > +vsync (63.6 kHz)
> > > (II) intel(0): Modeline "1280x960"x60.0
> > 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
> > (59.6 kHz)
> > > (II) intel(0): EDID vendor "SNY", prod id
> > 10096
> > > (II) intel(0): I2C bus "CRTDDC_A"
> > initialized.
> > > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > > (II) intel(0): I2C bus "CRTDDC_A"
> > initialized.
> > > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> > registered at address 0xA0.
> > > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> > removed.
> > > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > > (II) intel(0): EDID vendor "SNY", prod id
> > 10096
> > > (II) intel(0): Using hsync ranges from config file
> > > (II) intel(0): Using vrefresh ranges from config file
> > > (II) intel(0): Printing DDC gathered Modelines:
> > > (II) intel(0): Modeline "1280x1024"x0.0
> > 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
> > +vsync (64.0 kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5
> > kHz)
> > > (II) intel(0): Modeline "720x400"x0.0
> > 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5
> > kHz)
> > > (II) intel(0): Modeline "1280x1024"x0.0
> > 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync
> > +vsync (80.0 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> > (60.1 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> > (56.5 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> > (48.4 kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
> > kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
> > kHz)
> > > (II) intel(0): Modeline "1280x1024"x60.0
> > 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync
> > +vsync (63.6 kHz)
> > > (II) intel(0): Modeline "1280x960"x60.0
> > 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
> > (59.6 kHz)
> > > (II) intel(0): EDID vendor "SNY", prod id
> > 10096
> > > (II) intel(0): I2C bus "CRTDDC_A"
> > initialized.
> > > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > > (II) intel(0): I2C bus "CRTDDC_A"
> > initialized.
> > > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> > registered at address 0xA0.
> > > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> > removed.
> > > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > > (II) intel(0): EDID vendor "SNY", prod id
> > 10096
> > > (II) intel(0): Using hsync ranges from config file
> > > (II) intel(0): Using vrefresh ranges from config file
> > > (II) intel(0): Printing DDC gathered Modelines:
> > > (II) intel(0): Modeline "1280x1024"x0.0
> > 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
> > +vsync (64.0 kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5
> > kHz)
> > > (II) intel(0): Modeline "720x400"x0.0
> > 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5
> > kHz)
> > > (II) intel(0): Modeline "1280x1024"x0.0
> > 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync
> > +vsync (80.0 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> > (60.1 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> > (56.5 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> > (48.4 kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
> > kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
> > kHz)
> > > (II) intel(0): Modeline "1280x1024"x60.0
> > 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync
> > +vsync (63.6 kHz)
> > > (II) intel(0): Modeline "1280x960"x60.0
> > 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
> > (59.6 kHz)
> > > (II) intel(0): EDID vendor "SNY", prod id
> > 10096
> > > (II) intel(0): I2C bus "CRTDDC_A"
> > initialized.
> > > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > > (II) intel(0): I2C bus "CRTDDC_A"
> > initialized.
> > > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> > registered at address 0xA0.
> > > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> > removed.
> > > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > > (II) intel(0): EDID vendor "SNY", prod id
> > 10096
> > > (II) intel(0): Using hsync ranges from config file
> > > (II) intel(0): Using vrefresh ranges from config file
> > > (II) intel(0): Printing DDC gathered Modelines:
> > > (II) intel(0): Modeline "1280x1024"x0.0
> > 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
> > +vsync (64.0 kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5
> > kHz)
> > > (II) intel(0): Modeline "720x400"x0.0
> > 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5
> > kHz)
> > > (II) intel(0): Modeline "1280x1024"x0.0
> > 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync
> > +vsync (80.0 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> > (60.1 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> > (56.5 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> > (48.4 kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
> > kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
> > kHz)
> > > (II) intel(0): Modeline "1280x1024"x60.0
> > 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync
> > +vsync (63.6 kHz)
> > > (II) intel(0): Modeline "1280x960"x60.0
> > 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
> > (59.6 kHz)
> > > (II) intel(0): EDID vendor "SNY", prod id
> > 10096
> > > (II) intel(0): I2C bus "CRTDDC_A"
> > initialized.
> > > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > > (II) intel(0): I2C bus "CRTDDC_A"
> > initialized.
> > > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> > registered at address 0xA0.
> > > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> > removed.
> > > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > > (II) intel(0): EDID vendor "SNY", prod id
> > 10096
> > > (II) intel(0): Using hsync ranges from config file
> > > (II) intel(0): Using vrefresh ranges from config file
> > > (II) intel(0): Printing DDC gathered Modelines:
> > > (II) intel(0): Modeline "1280x1024"x0.0
> > 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
> > +vsync (64.0 kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9
> > kHz)
> > > (II) intel(0): Modeline "640x480"x0.0
> > 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5
> > kHz)
> > > (II) intel(0): Modeline "720x400"x0.0
> > 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5
> > kHz)
> > > (II) intel(0): Modeline "1280x1024"x0.0
> > 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync
> > +vsync (80.0 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> > (60.1 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> > (56.5 kHz)
> > > (II) intel(0): Modeline "1024x768"x0.0
> > 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> > (48.4 kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
> > kHz)
> > > (II) intel(0): Modeline "800x600"x0.0
> > 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
> > kHz)
> > > (II) intel(0): Modeline "1280x1024"x60.0
> > 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync
> > +vsync (63.6 kHz)
> > > (II) intel(0): Modeline "1280x960"x60.0
> > 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
> > (59.6 kHz)
> > > (II) intel(0): EDID vendor "SNY", prod id
> > 10096
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > freebsd-x11 at freebsd.org mailing list
> > > http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> > > To unsubscribe, send any mail to
> > "freebsd-x11-unsubscribe at freebsd.org"
>
>
>
> _______________________________________________
> freebsd-x11 at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe at freebsd.org"
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090129/addc49f2/attachment-0001.pgp
More information about the freebsd-x11
mailing list