7.4 -> X -configure gives No devices to configure
Robert Noland
rnoland at FreeBSD.org
Thu Feb 12 12:33:09 PST 2009
On Wed, 2009-02-11 at 10:42 +0000, Anton Shterenlikht wrote:
> Upgrade from 7.3 to 7.4 made X unsuable on FBSD 7.1-stable i386.
> I followed the UPDATE procedures, had no errors on build,
> but on X -configure I get
>
> No devices to configure. Configuration failed.
>
> This is a Compaq Armada 1700 laptop, old I know, but 7.3 worked
> fine. The graphics is by Chips and Technologies, nothing fancy,
> and the driver is xf86-video-chips-1.2.1. The full log is below.
>
> What's going on?
>
> many thanks
> anton
>
> *******************************
>
> X.Org X Server 1.5.3
> Release Date: 5 November 2008
> X Protocol Version 11, Revision 0
> Build Operating System: FreeBSD 7.1-STABLE i386
> Current Operating System: FreeBSD mech-aslap33.men.bris.ac.uk 7.1-STABLE FreeBSD 7.1-STABLE #0: Sat Jan 31 14:31:50 GMT 2009 mexas at mech-aslap33.men.bris.ac.uk:/usr/obj/usr/src/sys/ARMADA1700 i386
> Build Date: 09 February 2009 10:16:23AM
>
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 11 10:15:59 2009
> (II) Loader magic: 0x81bede0
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.4
> X.Org Video Driver: 4.1
> X.Org XInput driver : 2.1
> X.Org Server Extension : 1.1
> X.Org Font Renderer : 0.6
> (II) Loader running on freebsd
> (--) Using syscons driver with X support (version 2.0)
> (--) using VT number 9
>
> (--) PCI:*(0 at 0:8:0) Chips and Technologies F65555 HiQVPro rev 168, Mem @ 0x40000000/0, BIOS @ 0x????????/65536
> List of video drivers:
> chips
> (II) LoadModule: "chips"
>
> (II) Loading /usr/local/lib/xorg/modules/drivers//chips_drv.so
> (II) Module chips: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.2.1
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 4.1
> (II) System resource ranges:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) Primary Device is: PCI 00 at 00:08:0
> No devices to configure. Configuration failed.
I'll need to see a pciconf -lv, but it looks like the chips driver isn't
recognizing your chip. You could try the vesa driver. The chips driver
has not been maintained in quite a while I would say.
robert.
--
Robert Noland <rnoland at FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090212/db4169b9/attachment.pgp
More information about the freebsd-x11
mailing list