xorg or XFRee86 4.4.0 problem

[Charlie Root]

Hi,

I have got a i586 5.2.1-p9 Freebsd machine. With XFree86  4.3.0 and the attached XF86 Config file for it everything works fine. My Graphics Card is a ATI Rage Mobility M1. When i install xorg's XServer or XFree86s 4.4.0 XServer and I use the same configuration for it a dottetd rigbt above the coursor follows it. On the leftt lower side of my flat panel 3 lines are flickering. And on the whole lower side the coursor is not completley repainted. Anyway i have read that ther might be some special driver for this card and its not the ati driver anymore. But there is no way to choose another one in the corresponding X config tool.

Sincerley


Gerald Mixa
 
-------------- next part --------------
Section "ServerLayout"
	Identifier     "XFree86 Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
        FontPath     "/usr/X11R6/lib/X11/fonts/encodings/"
EndSection

Section "Module"
	Load  "extmod"
	Load  "glx"
	Load  "dri"
	Load  "dbe"
	Load  "record"
	Load  "xtrap"
	Load  "speedo"
	Load  "type1"
	Load  "freetype"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbRules" "xfree86"
	Option	    "XkbModel" "microsoft"
	Option	    "XkbLayout" "de"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/sysmouse"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "accel"              	# [<bool>]
        #Option     "crt_display"        	# [<bool>]
        #Option     "composite_sync"     	# [<bool>]
        #Option     "hw_cursor"          	# [<bool>]
        #Option     "linear"             	# [<bool>]
        #Option     "mmio_cache"         	# [<bool>]
        #Option     "panel_display"      	# [<bool>]
        #Option     "probe_clocks"       	# [<bool>]
        #Option     "reference_clock"    	# <freq>
        #Option     "shadow_fb"          	# [<bool>]
        #Option     "sw_cursor"          	# [<bool>]
	Identifier  "Card0"
	Option      "crt_display False"
	Option      "panel_display True"
	Option      "accel False"
	Driver      "ati"
	VendorName  "ATI"
	BoardName   "Rage Mobility P/M AGP 2x"
	ChipSet     "ati"
	ChipId      0x4c4d
	ChipRev     0x64
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth     15
	SubSection "Display"
		Depth     1
	EndSubSection
	SubSection "Display"
		Depth     4
	EndSubSection
	SubSection "Display"
		Depth     8
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes   "1024x768"
	EndSubSection
	SubSection "Display"
		Depth     16
	EndSubSection
	SubSection "Display"
		Depth     24
	EndSubSection
EndSection