www/129331: Supported motherboard Gigabyte GA-MA78GPM-DS2H

Gary Jennejohn gj at FreeBSD.org
Mon Dec 1 02:40:01 PST 2008 

>Number:         129331
>Category:       www
>Synopsis:       Supported motherboard Gigabyte GA-MA78GPM-DS2H
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-www
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          update
>Submitter-Id:   current-users
>Arrival-Date:   Mon Dec 01 10:40:00 UTC 2008
>Closed-Date:
>Last-Modified:
>Originator:     Gary Jennejohn
>Release:        8.0-CURRENT
>Organization:
>Environment:
FreeBSD ernst.jennejohn.org 8.0-CURRENT FreeBSD 8.0-CURRENT #15: Wed Nov 26 13:20:12 CET 2008     garyj at ernst.jennejohn.org:/obj/usr/src/sys/amd64  amd64

>Description:
The Gigabyte GA-MA78GPM-DS2H motherboard works very well with 8-CURRENT.

All onboard peripherals work fine.  I have tested the following peripherals

SATA with AHCI enabled.  Note that SATA DVD burners do not seem to work.
USB using the USB2 stack.  UMASS and FTDI serial adapters work.
Firewire with an external HDD enclosure.
The onboard re0 ethernet controller.
The onoard HDA sound controller (had to add hw.snd.default_unit=2 to /etc/sysctl.conf).  I've only used the headphone output.
The onboard graphics using xf86-video-ati-6.9.0.

I have 6GB of memory installed and am using ZFS.

root:ernst:~:bash:8> pciconf -lv
hostb0 at pci0:0:0:0:      class=0x060000 card=0x96001022 chip=0x96001022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    class      = bridge
    subclass   = HOST-PCI
pcib1 at pci0:0:1:0:       class=0x060400 card=0x96021022 chip=0x96021022 rev=0x00 hdr=0x01
    vendor     = 'Advanced Micro Devices (AMD)'
    class      = bridge
    subclass   = PCI-PCI
pcib2 at pci0:0:10:0:      class=0x060400 card=0x96001022 chip=0x96091022 rev=0x00 hdr=0x01
    vendor     = 'Advanced Micro Devices (AMD)'
    class      = bridge
    subclass   = PCI-PCI
atapci0 at pci0:0:17:0:    class=0x010601 card=0xb0021458 chip=0x43911002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = mass storage
    subclass   = SATA
ohci0 at pci0:0:18:0:      class=0x0c0310 card=0x50041458 chip=0x43971002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = serial bus
    subclass   = USB
ohci1 at pci0:0:18:1:      class=0x0c0310 card=0x50041458 chip=0x43981002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = serial bus
    subclass   = USB
ehci0 at pci0:0:18:2:      class=0x0c0320 card=0x50041458 chip=0x43961002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = serial bus
    subclass   = USB
ohci2 at pci0:0:19:0:      class=0x0c0310 card=0x50041458 chip=0x43971002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = serial bus
    subclass   = USB
ohci3 at pci0:0:19:1:      class=0x0c0310 card=0x50041458 chip=0x43981002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = serial bus
    subclass   = USB
ehci1 at pci0:0:19:2:      class=0x0c0320 card=0x50041458 chip=0x43961002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = serial bus
    subclass   = USB
none0 at pci0:0:20:0:      class=0x0c0500 card=0x43851458 chip=0x43851002 rev=0x3a hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 SMBUS Controller'
    class      = serial bus
    subclass   = SMBus
atapci1 at pci0:0:20:1:    class=0x01018a card=0x50021458 chip=0x439c1002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = mass storage
    subclass   = ATA
hdac1 at pci0:0:20:2:      class=0x040300 card=0xa1021458 chip=0x43831002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 High Definition Audio Controller'
    class      = multimedia
    subclass   = HDA
isab0 at pci0:0:20:3:      class=0x060100 card=0x43831002 chip=0x439d1002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = bridge
    subclass   = PCI-ISA
pcib3 at pci0:0:20:4:      class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 hdr=0x01
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 PCI to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
ohci4 at pci0:0:20:5:      class=0x0c0310 card=0x50041458 chip=0x43991002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = serial bus
    subclass   = USB
hostb1 at pci0:0:24:0:     class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(K8) Athlon 64/Opteron HyperTransport Technology Configuration'
    class      = bridge
    subclass   = HOST-PCI
hostb2 at pci0:0:24:1:     class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(K8) Athlon 64/Opteron Address Map'
    class      = bridge
    subclass   = HOST-PCI
hostb3 at pci0:0:24:2:     class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(K8) Athlon 64/Opteron DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
hostb4 at pci0:0:24:3:     class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(K8) Athlon 64/Opteron Miscellaneous Control'
    class      = bridge
    subclass   = HOST-PCI
vgapci0 at pci0:1:5:0:     class=0x030000 card=0xd0001458 chip=0x96101002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = display
    subclass   = VGA
hdac0 at pci0:1:5:1:       class=0x040300 card=0x960f1458 chip=0x960f1002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = multimedia
    subclass   = HDA
re0 at pci0:2:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x02 hdr=0x00
    vendor     = 'Realtek Semiconductor'
    device     = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
    class      = network
    subclass   = ethernet
fwohci0 at pci0:3:14:0:    class=0x0c0010 card=0x10001458 chip=0x8024104c rev=0x00 hdr=0x00
    vendor     = 'Texas Instruments (TI)'
    device     = 'TSB43AB23 1394a-2000 OHCI PHY/link-layer Controller'
    class      = serial bus
    subclass   = FireWire

dmesg output

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #15: Wed Nov 26 13:20:12 CET 2008
    garyj at ernst.jennejohn.org:/obj/usr/src/sys/amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Dual Core Processor 4850e (2505.35-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x60fb2  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
  TSC: P-state invariant
  Cores per package: 2
usable memory = 6295797760 (6004 MB)
avail memory  = 6064898048 (5783 MB)
ACPI APIC Table: <GBT    GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, c7ce0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xee00-0xeeff mem 0xd0000000-0xdfffffff,0xfdfe0000-0xfdfeffff,0xfde00000-0xfdefffff irq 18 at device 5.0 on pci1
hdac0: <ATI (Unknown) High Definition Audio Controller> mem 0xfdffc000-0xfdffffff irq 19 at device 5.1 on pci1
hdac0: HDA Driver Revision: 20081123_0118
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xde00-0xdeff mem 0xfdaff000-0xfdafffff,0xfdae0000-0xfdaeffff irq 18 at device 0.0 on pci2
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:1f:d0:8f:5a:43
re0: [FILTER]
atapci0: <ATI AHCI controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 6 ports PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 18.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 16 at device 18.1 on pci0
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 17 at device 18.2 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
ohci2: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 18 at device 19.0 on pci0
ohci2: [ITHREAD]
usbus3: <OHCI (generic) USB controller> on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.1 on pci0
ohci3: [ITHREAD]
usbus4: <OHCI (generic) USB controller> on ohci3
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.2 on pci0
ehci1: [ITHREAD]
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP700 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
hdac1: <ATI SB600 High Definition Audio Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0
hdac1: HDA Driver Revision: 20081123_0118
hdac1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
fwohci0: <Texas Instruments TSB43AB23> mem 0xfdcff000-0xfdcff7ff,0xfdcf8000-0xfdcfbfff irq 22 at device 14.0 on pci3
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:77:18:1d:00:00:1f:d0
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1694000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:77:18:00:1f:d0
fwe0: Ethernet address: 02:77:18:00:1f:d0
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:77:18:1d:00:00:1f:d0 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ohci4: <OHCI (generic) USB controller> mem 0xfe028000-0xfe028fff irq 18 at device 20.5 on pci0
ohci4: [ITHREAD]
usbus6: <OHCI (generic) USB controller> on ohci4
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model MouseMan+, device ID 0
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ZFS filesystem version 13
ZFS storage pool version 13
ugen0.1: <ATI> at usbus0
ushub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ushub0: 3 ports with 3 removable, self powered
usbus1: 12Mbps Full Speed USB v1.0
ugen1.1: <ATI> at usbus1
ushub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ushub1: 3 ports with 3 removable, self powered
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <ATI> at usbus2
ushub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ushub2: 6 ports with 6 removable, self powered
usbus3: 12Mbps Full Speed USB v1.0
ugen3.1: <ATI> at usbus3
ushub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ushub3: 3 ports with 3 removable, self powered
usbus4: 12Mbps Full Speed USB v1.0
ugen4.1: <ATI> at usbus4
ushub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ushub4: 3 ports with 3 removable, self powered
usbus5: 480Mbps High Speed USB v2.0
ugen5.1: <ATI> at usbus5
ushub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ushub5: 6 ports with 6 removable, self powered
usbus6: 12Mbps Full Speed USB v1.0
ugen6.1: <ATI> at usbus6
ushub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ushub6: 2 ports with 2 removable, self powered
acd0: DVDR <HL-DT-STDVD-RAM GSA-H54N/1.00> at ata0-master UDMA66
ad0: 238474MB <Seagate ST3250620AS 3.AAJ> at ata2-master SATA300
ad1: 476938MB <Seagate ST3500630NS 3.AEG> at ata3-master SATA300
ad2: 476940MB <SAMSUNG HD501LJ CR100-10> at ata4-master SATA300
hdac0: HDA Codec #0: ATI (Unknown)
pcm0: <HDA ATI (Unknown) PCM #0 Digital> at cad 0 nid 1 on hdac0
hdac1: HDA Codec #0: Realtek ALC885
pcm1: <HDA Realtek ALC885 PCM #0 Analog> at cad 0 nid 1 on hdac1
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-RAM GSA-H54N 1.00> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
pcm2: <HDA Realtek ALC885 PCM #1 Analog> at cad 0 nid 1 on hdac1
pcm3: <HDA Realtek ALC885 PCM #2 Digital> at cad 0 nid 1 on hdac1
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
ugen2.2: <NEC> at usbus2
ushub7: <NEC product 0x005a, class 9/0, rev 2.00/1.00, addr 2> on usbus2
ushub7: 4 ports with 4 removable, self powered
ugen2.3: <FTDI> at usbus2
uftdi0: <USB to Serial Cable> on usbus2
ugen2.4: <FTDI> at usbus2
uftdi1: <USB to Serial Cable> on usbus2

>How-To-Repeat:

>Fix:


>Release-Note:
>Audit-Trail:
>Unformatted:

More information about the freebsd-www mailing list