hostapd + freeradius can't connect

[Johann]

You need a valid user on the freeradius server.

You can add something like this at the end of the 
/usr/local/etc/raddb/users file.

"wifi"                          User-Password == "test"

Then you add that to wpa_supplicant

On 2015/05/20 06:31 PM, Adrian Chadd wrote:
> Hm, what do I use for the username/password field in wpa_supplicant?
>
>
> -a
>
>
> On 20 May 2015 at 09:29, Johann <jhugo.meraka at gmail.com> wrote:
>> On 2015/05/16 08:03 AM, Adrian Chadd wrote:
>>> Hi,
>>> Has this ever worked?
>>
>> Yes.
>>
>> I got it working in April 2012 on FreeBSD 8 and 9. I've used a FreeRadius
>> server and a FreeBSD client with wpa_supplicant to test it.
>>
>> At that stage you had to enable the eap_server when you compile hostapd
>>
>> # echo HOSTAPD_CFLAGS+=-DEAP_SERVER >> /etc/src.conf
>> # cd /usr/src/usr.sbin/wpa/hostapd
>> # make
>> # make install
>>
>> but Bernhard Schmidt fixed it so that EAP_SERVER was enabled by default.
>>
>>
>> Here is the configs that I used:
>>
>> rc.conf
>> hostname="AP-vlan"
>> wlans_ath0="wlan0"
>> create_args_wlan0="wlanmode hostap country ZA"
>> ifconfig_wlan0="146.64.5.5/24 mode 11g channel 6"
>> defaultrouter="146.64.5.1"
>> hostapd_enable="YES"
>> cloned_interfaces="bridge0"
>> ifconfig_bridge0="addm sis0 addm wlan0 up"
>> ifconfig_sis0="up"
>>
>>
>> hostapd.conf
>> interface=wlan0
>> ctrl_interface=/var/run/hostapd
>> ctrl_interface_group=wheel
>> ssid=testAP
>> hw_mode=g
>> channel=6
>>
>> wpa=1
>> wpa_pairwise=CCMP TKIP
>> wpa_key_mgmt=WPA-EAP
>> wpa_pairwise=TKIP CCMP
>> rsn_pairwise=CCMP
>>
>> Hope it helps
>>
>> Regards
>> Johann
>>
>> _______________________________________________
>> freebsd-wireless at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"