high latency due to distant clients
Petar Bogdanovic
petar at smokva.net
Thu Jul 18 22:55:35 UTC 2013
On Thu, Jul 18, 2013 at 04:31:10PM -0600, John Nielsen wrote:
>
> If it makes you feel any better, I've been running -HEAD (with
> semi-regular updates) on my ALIX AP for a while without any trouble.
> Of course, I do the builds on another box... I'm happy to share make
> settings, etc if that would be useful.
Your kernel configuration would be interesting. Mine is attached. I
think it's a modified version from http://m0n0.ch/wall/.
Petar Bogdanovic
-------------- next part --------------
machine i386
cpu I586_CPU
ident ALIX
makeoptions MODULES_OVERRIDE=""
options HZ=1000
options CONSPEED=38400
options CPU_GEODE
hints "ALIX.hints"
options SCHED_4BSD # 4BSD scheduler
options INET # InterNETworking
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options TMPFS # Efficient memory file system
options MD_ROOT # MD is a potential root device
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options NO_SWAPPING
options DEVICE_POLLING
device apic # I/O APIC
# Bus support.
device eisa
device pci
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
options ATA_STATIC_ID # Static device numbering
device scbus # SCSI bus (required for SCSI)
device da # Direct Access (disks)
# Add suspend/resume support for the i8254.
device pmtimer
# Serial (COM) ports
device uart # Generic UART driver
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device vr # VIA Rhine, Rhine II
# Wireless NIC cards
device wlan # 802.11 support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
device wlan_xauth # 802.11 external authenticator support
device wlan_acl
device ath
device ath_pci # Atheros pci/cardbus glue
device ath_hal # Atheros HAL (includes binary component)
device ath_rate_sample # SampleRate rate control for the ath driver
options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device tun # Packet tunnel
device tap # Ethernet tunnel
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device if_bridge # Bridge interface
device vlan # VLAN support (needs miibus)
device bpf # Berkeley packet filter
device pf # PF OpenBSD packet-filter firewall
device pflog # logging support interface for PF
#device pfsync # synchronization interface for PF
options ALTQ
options ALTQ_CBQ # Class Bases Queueing
options ALTQ_RED # Random Early Detection
options ALTQ_RIO # RED In/Out
options ALTQ_HFSC # Hierarchical Packet Scheduler
options ALTQ_CDNR # Traffic conditioner
options ALTQ_PRIQ # Priority Queueing
#options ALTQ_NOPCC # Required if the TSC is unusable
options NETGRAPH # netgraph(4) system
options NETGRAPH_ASYNC
options NETGRAPH_BPF
options NETGRAPH_ETHER
options NETGRAPH_IFACE
options NETGRAPH_KSOCKET
options NETGRAPH_L2TP
options NETGRAPH_MPPC_ENCRYPTION
options NETGRAPH_PPP
options NETGRAPH_PPPOE
options NETGRAPH_PPTPGRE
options NETGRAPH_SOCKET
options NETGRAPH_TCPMSS
options NETGRAPH_TEE
options NETGRAPH_UI
options NETGRAPH_VJC
device crypto
device cryptodev
device hifn
-------------- next part --------------
# $FreeBSD: src/sys/i386/conf/GENERIC.hints,v 1.16 2006/05/17 21:25:22 marius Exp $
hint.fdc.0.at="isa"
hint.fdc.0.port="0x3F0"
hint.fdc.0.irq="6"
hint.fdc.0.drq="2"
hint.fd.0.at="fdc0"
hint.fd.0.drive="0"
hint.fd.1.at="fdc0"
hint.fd.1.drive="1"
hint.ata.0.at="isa"
hint.ata.0.port="0x1F0"
hint.ata.0.irq="14"
hint.ata.1.at="isa"
hint.ata.1.port="0x170"
hint.ata.1.irq="15"
hint.adv.0.at="isa"
hint.adv.0.disabled="1"
hint.bt.0.at="isa"
hint.bt.0.disabled="1"
hint.aha.0.at="isa"
hint.aha.0.disabled="1"
hint.aic.0.at="isa"
hint.aic.0.disabled="1"
hint.atkbdc.0.at="isa"
hint.atkbdc.0.port="0x060"
hint.atkbd.0.at="atkbdc"
hint.atkbd.0.irq="1"
hint.psm.0.at="atkbdc"
hint.psm.0.irq="12"
hint.vga.0.at="isa"
hint.sc.0.at="isa"
hint.sc.0.flags="0x100"
hint.vt.0.at="isa"
hint.vt.0.disabled="1"
hint.apm.0.disabled="1"
hint.apm.0.flags="0x20"
hint.uart.0.at="isa"
hint.uart.0.port="0x3F8"
hint.uart.0.flags="0x10"
hint.uart.0.irq="4"
hint.uart.1.at="isa"
hint.uart.1.port="0x2F8"
hint.uart.1.irq="3"
hint.uart.2.at="isa"
hint.uart.2.disabled="1"
hint.uart.2.port="0x3E8"
hint.uart.2.irq="5"
hint.uart.3.at="isa"
hint.uart.3.disabled="1"
hint.uart.3.port="0x2E8"
hint.uart.3.irq="9"
hint.ppc.0.at="isa"
hint.ppc.0.irq="7"
hint.ed.0.at="isa"
hint.ed.0.disabled="1"
hint.ed.0.port="0x280"
hint.ed.0.irq="10"
hint.ed.0.maddr="0xd8000"
hint.cs.0.at="isa"
hint.cs.0.disabled="1"
hint.cs.0.port="0x300"
hint.sn.0.at="isa"
hint.sn.0.disabled="1"
hint.sn.0.port="0x300"
hint.sn.0.irq="10"
hint.ie.0.at="isa"
hint.ie.0.disabled="1"
hint.ie.0.port="0x300"
hint.ie.0.irq="10"
hint.ie.0.maddr="0xd0000"
hint.fe.0.at="isa"
hint.fe.0.disabled="1"
hint.fe.0.port="0x300"
hint.le.0.at="isa"
hint.le.0.disabled="1"
hint.le.0.port="0x280"
hint.le.0.irq="10"
hint.le.0.drq="0"
More information about the freebsd-wireless
mailing list