wpa_supplicant + WPA psk + ad-hoc mode working
Adrian Chadd
adrian at freebsd.org
Sat May 12 05:27:57 UTC 2012
Hi!
This is great! Would you be willing to write a wiki.freebsd.org
tutorial page on this?
If you are then please create a wiki account and let me know what it
is. I'll then add you to the contributors group.
Thanks!
Adrian
On 10 May 2012 06:49, Johann Hugo <jhugo at meraka.csir.co.za> wrote:
> Hi
>
> Just managed to configure AES-CCM encryption between three wifi devices in
> adhoc mode and every thing seems to work fine.
>
> I also found out that "ap_scan" must be set to "2" before it works.
>
> Looks like the man page needs a small update:
> ap_scan
> Access point scanning and selection control; one of 0, 1
> (default), or 2. Only setting 1 should be used with the wlan(4)
> module; the other settings are for use on other operating sys‐
> tems.
>
> mode IEEE 802.11 operation mode; either 0 (infrastructure, default) or
> 1 (IBSS). Note that IBSS (adhoc) mode can only be used with
> key_mgmt set to NONE (plaintext and static WEP), or key_mgmt set
> to WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan
> has to be set to 2 for IBSS. WPA-NONE requires proto set to WPA,
> key_mgmt set to WPA-NONE, pairwise set to NONE, group set to
> either CCMP or TKIP (but not both), and psk must also be set.
>
> ----------------------------
> Here is my configs:
> ----------------------------
> mesh-2aee:~ # more /etc/rc.conf
>
> wlans_ath0="wlan0"
> create_args_wlan0="wlanmode adhoc country ZA"
> ifconfig_wlan0="WPA channel 13 ssid mesh bssid 66:98:40:46:b7:0a"
>
>
> mesh-2aee:~ # more /etc/wpa_supplicant.conf
>
> ap_scan=2
>
> network={
> ssid="mesh"
> mode=1
> key_mgmt=WPA-NONE
> proto=WPA
> pairwise=NONE
> group=CCMP
> psk="testsecret"
> }
>
> mesh-2aee:~ # ifconfig wlan0
> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> ether 00:80:48:4f:2a:ee
> inet6 fe80::280:48ff:fe4f:2aee%wlan0 prefixlen 64 scopeid 0x7
> inet6 fd9c:6829:597c:20:280:48ff:fe4f:2aee prefixlen 64
> inet6 fd9c:6829:597c:20:: prefixlen 64 anycast
> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <adhoc>
> status: running
> ssid mesh channel 13 (2472 MHz 11g) bssid 66:98:40:46:b7:0a
> regdomain NONE country ZA ecm authmode WPA privacy ON deftxkey 1
> AES-CCM 1:128-bit txpower 30 scanvalid 450 protmode CTS wme burst
> roaming MANUAL
>
> mesh-2aee:~ # ifconfig wlan0 list sta
> ADDR AID CHAN RATE RSSI IDLE TXSEQ RXSEQ CAPS FLAG
> 00:80:48:4f:2a:ee 0 13 0M 4.0 105 47746 2496 IP A
> 00:21:a4:32:06:53 0 13 24M 22.5 0 1793 22160 IPS AQE WPA WME
> 00:21:a4:32:06:39 0 13 24M 25.5 0 24479 8848 IPS AQE WPA WME
>
> Johann
> _______________________________________________
> freebsd-wireless at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"
More information about the freebsd-wireless
mailing list