Please Test: Updated Ral Driver Patch for rt2860/rt3090

[matt]

On 03/10/12 18:23, Sevan / Venture37 wrote:
> On 10/03/2012 03:17, matt wrote:
>> Hi Folks! Thanks for the patience :)
>
> Hi Matt,
>
>> Here's the patch for HEAD:
>>
>> https://docs.google.com/open?id=0B6YlMzJxarGbR1lSZ0hnTEFSREt6MU1MbGFKeURhUQ 
>>
>
> The patch you linked to above had several errors which prevented it 
> from being built, I've cleaned things up & added them to a mercurial 
> repo https://bitbucket.org/sevan/ral/overview (you're welcome to have 
> write access Matt if you don't plan on hosting the files elsewhere)
>
> both directories just need to be copied to /usr/src/sys
>
>> You will see an invalid eeprom low-noise amplifier gain for low-noise
>> amplifiers you don't have. If it doesn't attach at all, send me your PCI
>> ids and we can add them to the attach code and see if they work.
>>
>> My expectation is everything from rt2860-rt3090 at least will work.
>
> The driver attaches but ifconfig wlan0 scan doesn't show any access 
> points
>
> ral0: <Ralink Technology RT2790> mem 0xf7f00000-0xf7f0ffff irq 17 at 
> device 0.0 on pci3
> ral0: invalid EEPROM LNA gain #2: 0x00
> ral0: invalid EEPROM LNA gain #3: 0x00
> ral0: invalid EEPROM powersave level
> ral0: MAC/BBP RT2860 (rev 0x28720200), RF RT3022 2.4G 2T2R
> ral0: skip channel 10, could not find extension channel
> ral0: skip channel 11, could not find extension channel
> ral0: skip channel 12, could not find extension channel
> ral0: skip channel 13, could not find extension channel
> ral0: skip channel 14, could not find extension channel
> ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 
> 24Mbps 36Mbps 48Mbps 54Mbps
> ral0: 2T2R
> ral0: 11ng MCS 20MHz
> ral0: MCS 0-7: 6.5Mbps - 65Mbps
> ral0: MCS 8-15: 13Mbps - 130Mbps
> ral0: 11ng MCS 20MHz SGI
> ral0: MCS 0-7: 7Mbps - 72Mbps
> ral0: MCS 8-15: 14.5Mbps - 144.5Mbps
> ral0: 11ng MCS 40MHz:
> ral0: MCS 0-7: 13.5Mbps - 135Mbps
> ral0: MCS 8-15: 27Mbps - 270Mbps
> ral0: 11ng MCS 40MHz SGI:
> ral0: MCS 0-7: 15Mbps - 150Mbps
> ral0: MCS 8-15: 30Mbps - 300Mbps
>
> Sevan / Venture37
>
> _______________________________________________
> freebsd-wireless at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to 
> "freebsd-wireless-unsubscribe at freebsd.org"
>
What several errors? Compiles fine against head...are you compiling 
against 9? clang?
Or is the patch dumping the modules and dev folder out early?
Confused...it worked fine here...I admit my patch-fu is weak :).

Looks good on attach though...I only have a 1t1r so it's nice to see 
something else attach.

Thanks,
Matt