LOR - COM LOCK

Edgar Martinez emartinez at kbcnetworks.com
Mon Oct 10 09:12:48 UTC 2011 

KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fff00000 len=0000000000100000
SMAP type=01 base=0000000000100000 len=000000000ff00000
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0: Fri Oct  7 00:46:32 PDT 2011
    root at marv90.local:/usr/obj/usr/src/sys/MESH i386
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
Preloaded elf kernel "/kernel" at 0xc4b75000.
Preloaded md_image "/mfsroot" at 0xc4b75124.
Calibrating TSC clock ... TSC clock: 498061816 Hz
CPU: Geode(TM) Integrated Processor by AMD PCS (498.06-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x5a2  Family = 5  Model = a  Stepping = 2
  Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
  AMD Features=0xc0400000<MMX+,3DNow!+,3DNow!>
Data TLB: 16 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 32 bytes/line, 1 lines/tag, 16-way associative
L1 instruction cache: 64 kbytes, 32 bytes/line, 1 lines/tag, 16-way associative
L2 internal cache: 128 kbytes, 32 bytes/line, 1 lines/tag, 4-way associative
Write Allocate Disable
real memory  = 268435456 (256 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000004c26000 - 0x000000000fb2cfff, 183529472 bytes (44807 pages)
avail memory = 185937920 (177 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fd0b0
bios32: Entry = 0xfd088 (c00fd088)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xced9
pnpbios: Bad PnP BIOS data checksum
Other BIOS signatures found:
ULE: setup cpu 0
wlan: <802.11 Link Layer>
wlan: mac acl policy registered
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
K6-family MTRR support enabled (2 registers)
crypto: <crypto core>
null: <null device, zero device>
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 1 [class=060000] [hdr=80] is there (id=20801022)
pcibios: BIOS version 2.10
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1022, dev=0x2080, revid=0x33
        domain=0, bus=0, slot=1, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0005, statreg=0x0220, cachelnsz=8 (dwords)
        lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type I/O Port, range 32, base 0xac1c, size  2, enabled
found-> vendor=0x1022, dev=0x2082, revid=0x00
        domain=0, bus=0, slot=1, func=2
        class=10-10-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x02a0, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=9
        map[10]: type Memory, range 32, base 0xefff4000, size 14, enabled
found-> vendor=0x1106, dev=0x3053, revid=0x96
        domain=0, bus=0, slot=9, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0097, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type I/O Port, range 32, base 0x1000, size  8, enabled
        map[14]: type Memory, range 32, base 0xe0000000, size  8, enabled
found-> vendor=0x168c, dev=0x001b, revid=0x01
        domain=0, bus=0, slot=12, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0016, statreg=0x0290, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
        intpin=a, irq=9
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xe0040000, size 16, enabled
found-> vendor=0x168c, dev=0x001b, revid=0x01
        domain=0, bus=0, slot=14, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0016, statreg=0x0290, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xe0080000, size 16, enabled
found-> vendor=0x1022, dev=0x2090, revid=0x03
        domain=0, bus=0, slot=15, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0009, statreg=0x02a0, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type I/O Port, range 32, base 0x6000, size  3, enabled
        map[14]: type I/O Port, range 32, base 0x6100, size  8, enabled
        map[18]: type I/O Port, range 32, base 0x6200, size  6, enabled
        map[20]: type I/O Port, range 32, base 0x9d00, size  7, enabled
        map[24]: type I/O Port, range 32, base 0x9c00, size  6, enabled
found-> vendor=0x1022, dev=0x209a, revid=0x01
        domain=0, bus=0, slot=15, func=2
        class=01-01-80, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x02a0, cachelnsz=8 (dwords)
        lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[20]: type I/O Port, range 32, base 0xff00, size  4, enabled
found-> vendor=0x1022, dev=0x2094, revid=0x02
        domain=0, bus=0, slot=15, func=4
        class=0c-03-10, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0230, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=12
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xefffe000, size 12, enabled
found-> vendor=0x1022, dev=0x2095, revid=0x02
        domain=0, bus=0, slot=15, func=5
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0230, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=12
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xefffd000, size 12, enabled
Geode LX: PC Engines ALIX.3 v0.99h tinyBIOS V1.4a (C)1997-2007
MFGPT bar: f00100006200
glxsb0: <AMD Geode LX Security Block (AES-128-CBC, RNG)> mem 0xefff4000-0xefff7fff irq 9 at device 1.2 on pci0
crypto: assign glxsb0 driver id 1, flags 16777216
crypto: glxsb0 registers alg 11 flags 0 maxoplen 0
crypto: glxsb0 registers alg 15 flags 0 maxoplen 0
crypto: glxsb0 registers alg 6 flags 0 maxoplen 0
crypto: glxsb0 registers alg 7 flags 0 maxoplen 0
crypto: glxsb0 registers alg 8 flags 0 maxoplen 0
crypto: glxsb0 registers alg 18 flags 0 maxoplen 0
crypto: glxsb0 registers alg 19 flags 0 maxoplen 0
crypto: glxsb0 registers alg 20 flags 0 maxoplen 0
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1000-0x10ff mem 0xe0000000-0xe00000ff irq 10 at device 9.0 on pci0
vr0: Quirks: 0x2
vr0: Revision: 0x96
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: OUI 0x0002c6, model 0x0034, rev. 3
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:0d:b9:19:57:e4
ath0: <Atheros 5413> mem 0xe0040000-0xe004ffff irq 9 at device 12.0 on pci0
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboG rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: sturboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: AR5413 mac 10.5 RF5413 phy 6.1
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ath0: using multicast key search
ath1: <Atheros 5413> mem 0xe0080000-0xe008ffff irq 11 at device 14.0 on pci0
ath1: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath1: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath1: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath1: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath1: turboG rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath1: sturboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath1: AR5413 mac 10.5 RF5413 phy 6.1
ath1: Use hw queue 1 for WME_AC_BE traffic
ath1: Use hw queue 0 for WME_AC_BK traffic
ath1: Use hw queue 2 for WME_AC_VI traffic
ath1: Use hw queue 3 for WME_AC_VO traffic
ath1: Use hw queue 8 for CAB traffic
ath1: Use hw queue 9 for beacons
ath1: using multicast key search
isab0: <PCI-ISA bridge> port 0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x9d7f,0x9c00-0x9c3f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD CS5536 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 15.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1
ata1: <ATA channel 1> on atapci0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
pci0: <serial bus, USB> at device 15.4 (no driver attached)
pci0: <serial bus, USB> at device 15.5 (no driver attached)
cpu0 on motherboard
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xe0000-0xea7ff pnpid ORM0000 on isa0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: fast interrupt
uart0: console (38400,n,8,1)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounters tick every 1.000 msec
epair initialized.
vlan: initialized, using hash tables with chaining
crypto: <crypto device>
pfsync0: bpf attached
IPsec: Initialized Security Association Processing.
lo0: bpf attached
enc0: bpf attached
pflog0: bpf attached
ata0: Identifying devices: 00000001
ata0: New devices: 00000001
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=80 wire
md0: Preloaded image </mfsroot> 67717632 bytes at 0xc0ade9f4
ad0: setting WDMA2
ad0: 1918MB <SanDisk SDCFH-002G HDX 5.04> at ata0-master WDMA2
ad0: 3928176 sectors [3897C/16H/63S] 1 sectors/interrupt 1 depth queue
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic: panic:

More information about the freebsd-wireless mailing list