Ath works as module, not inkernel

richo richo at psych0tik.net
Sat Aug 6 10:09:58 UTC 2011


On 01/08/11 23:30 +0800, Adrian Chadd wrote:
>.. it should've produced output in dmesg.
>
>Also try adding:
>
>dev.ath.0.hal.debug=0x4
>
>See if that helps?
>
>Also, how the hell are you able to load a module for ath/hal if it's
>compiled into your kernel? or is it failing to load it early on in the
>single user boot, but then fine to load it in later?
>
>
>Adrian

Hi Adrian,

Sorry it has taken me a few days to get back to this.

When I added the above line to loader.conf, I did see something about loading
ath before the FreeBSD boot loader screen (ie, before a kernel was selected
and loaded) could that be the issue?

I have included my dmesg


Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-BETA1 #17 r224492: Sat Jul 30 11:48:28 EST 2011
     root at solitaire.psych0tik.net:/usr/obj/usr/src/sys/SOLITAIRE i386
Table 'FACP' at 0x1fff0400
Table 'ASF!' at 0x1fff0800
ACPI: No SRAT table found
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0cc3000.
Preloaded elf module "/boot/kernel/if_ath.ko" at 0xc0cc314c.
Preloaded elf module "/boot/kernel/if_ath_pci.ko" at 0xc0cc31f8.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0cc32a8.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc0cc3354.
Calibrating TSC clock ... TSC clock: 1298926316 Hz
CPU: Intel(R) Pentium(R) M processor 1300MHz (1298.93-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x695  Family = 6  Model = 9  Stepping = 5
   Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
   Features2=0x180<EST,TM2>

Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
Data TLB: 4 KB Pages, 4-way set associative, 128 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
2nd-level cache: 1 MB, 8-way set associative, 64 byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
real memory  = 536870912 (512 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001026000 - 0x000000001f658fff, 509816832 bytes (124467 pages)
avail memory = 511254528 (487 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc96e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
ULE: setup cpu 0
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
ACPI: RSDP 0xfdf00 00014 (v00 DELL  )
ACPI: RSDT 0x1fff0000 0002C (v01 DELL    CPi R   27D5061D ASL  00000061)
ACPI: FACP 0x1fff0400 00074 (v01 DELL    CPi R   27D5061D ASL  00000061)
ACPI: DSDT 0x1fff0c00 02E1A (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
ACPI: FACS 0x1ffff800 00040
ACPI: ASF! 0x1fff0800 0005B (v16 DELL    CPi R   27D5061D ASL  00000061)
acpi0: <DELL CPi R  > on motherboard
acpi0: wakeup code va 0xc2a48000 pa 0x1000
atpic: Programming IRQ9 as level/low
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=33408086)
pcibios: BIOS version 2.10
acpi0: reservation of 0, 9fc00 (3) failed
acpi0: reservation of 100000, 1fef0000 (3) failed
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  9 10 11
   Validation          0   11   N     0  9 10 11
   After Disable       0  255   N     0  9 10 11
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  5 7
   Validation          0  255   N     0  5 7
   After Disable       0  255   N     0  5 7
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  9 10 11
   Validation          0   11   N     0  9 10 11
   After Disable       0  255   N     0  9 10 11
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  5 7 9 10 11
   Validation          0   11   N     0  5 7 9 10 11
   After Disable       0  255   N     0  5 7 9 10 11
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
   Validation          0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
   After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
   Validation          0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
   After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xd0000-0xdffff
pcib0: decoding 3 range 0x20000000-0xfed9ffff
pcib0: decoding 3 range 0xfee00000-0xffafffff
ACPI: Found matching pin for 0.31.INTA at func 1: 255
ACPI: Found matching pin for 0.31.INTB at func 5: 11
pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid
ACPI: Found matching pin for 0.29.INTA at func 0: 11
ACPI: Found matching pin for 0.29.INTB at func 1: 11
ACPI: Found matching pin for 0.29.INTC at func 2: 11
ACPI: Found matching pin for 0.29.INTD at func 7: 11
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x3340, revid=0x03
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, enabled
pcib0: allocated type 3 (0xe0000000-0xe7ffffff) for rid 10 of pci0:0:0:0
found->	vendor=0x8086, dev=0x3341, revid=0x03
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24c2, revid=0x01
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type I/O Port, range 32, base 0xbf80, size  5, enabled
pcib0: allocated type 4 (0xbf80-0xbf9f) for rid 20 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0)
pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
found->	vendor=0x8086, dev=0x24c4, revid=0x01
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0xbf40, size  5, enabled
pcib0: allocated type 4 (0xbf40-0xbf5f) for rid 20 of pci0:0:29:1
pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD
found->	vendor=0x8086, dev=0x24c7, revid=0x01
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	map[20]: type I/O Port, range 32, base 0xbf20, size  5, enabled
pcib0: allocated type 4 (0xbf20-0xbf3f) for rid 20 of pci0:0:29:2
pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0)
pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC
found->	vendor=0x8086, dev=0x24cd, revid=0x01
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf4fffc00, size 10, enabled
pcib0: allocated type 3 (0xf4fffc00-0xf4ffffff) for rid 10 of pci0:0:29:7
pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LNKH:0)
pcib0: slot 29 INTD routed to irq 11 via \\_SB_.PCI0.LNKH
found->	vendor=0x8086, dev=0x2448, revid=0x81
	domain=0, bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24cc, revid=0x01
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24ca, revid=0x01
	domain=0, bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1
pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1
pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1
pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1
	map[20]: type I/O Port, range 32, base 0xbfa0, size  4, enabled
pcib0: allocated type 4 (0xbfa0-0xbfaf) for rid 20 of pci0:0:31:1
	map[24]: type Memory, range 32, base 0, size 10, memory disabled
found->	vendor=0x8086, dev=0x24c5, revid=0x01
	domain=0, bus=0, slot=31, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xb800, size  8, enabled
pcib0: allocated type 4 (0xb800-0xb8ff) for rid 10 of pci0:0:31:5
	map[14]: type I/O Port, range 32, base 0xbc40, size  6, enabled
pcib0: allocated type 4 (0xbc40-0xbc7f) for rid 14 of pci0:0:31:5
	map[18]: type Memory, range 32, base 0xf4fff800, size  9, enabled
pcib0: allocated type 3 (0xf4fff800-0xf4fff9ff) for rid 18 of pci0:0:31:5
	map[1c]: type Memory, range 32, base 0xf4fff400, size  8, enabled
pcib0: allocated type 3 (0xf4fff400-0xf4fff4ff) for rid 1c of pci0:0:31:5
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0)
pci_link1: Picked IRQ 9 with weight 0
pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB
found->	vendor=0x8086, dev=0x24c6, revid=0x01
	domain=0, bus=0, slot=31, func=6
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xb400, size  8, enabled
pcib0: allocated type 4 (0xb400-0xb4ff) for rid 10 of pci0:0:31:6
	map[14]: type I/O Port, range 32, base 0xb080, size  7, enabled
pcib0: allocated type 4 (0xb080-0xb0ff) for rid 14 of pci0:0:31:6
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0)
pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB
agp0: <Intel 82855 host to AGP bridge> on hostb0
agp0: allocating GATT for aperture of size 128M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib0: allocated type 4 (0xc000-0xcfff) for rid 1c of pcib1
pcib0: allocated type 3 (0xfc000000-0xfdffffff) for rid 20 of pcib1
pcib0: allocated type 3 (0xe8000000-0xefffffff) for rid 24 of pcib1
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xc000-0xcfff
pcib1:   memory decode     0xfc000000-0xfdffffff
pcib1:   prefetched decode 0xe8000000-0xefffffff
ACPI: Found matching pin for 1.0.INTA at func 0: 11
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x1002, dev=0x4c66, revid=0x01
	domain=0, bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x01a7, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 27, enabled
pcib1: allocated prefetch range (0xe8000000-0xefffffff) for rid 10 of pci0:1:0:0
	map[14]: type I/O Port, range 32, base 0xc000, size  8, enabled
pcib1: allocated I/O port range (0xc000-0xc0ff) for rid 14 of pci0:1:0:0
	map[18]: type Memory, range 32, base 0xfcff0000, size 16, enabled
pcib1: allocated memory range (0xfcff0000-0xfcffffff) for rid 18 of pci0:1:0:0
pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA:0)
pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xe8000000-0xefffffff,0xfcff0000-0xfcffffff irq 11 at device 0.0 on pci1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usbus0: bpf attached
uhci0: usbpf: Attached
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0
usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usbus1: bpf attached
uhci1: usbpf: Attached
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usbus2: bpf attached
uhci2: usbpf: Attached
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xf4fffc00-0xf4ffffff irq 11 at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usbus3: bpf attached
ehci0: usbpf: Attached
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib0: allocated type 4 (0xd000-0xefff) for rid 1c of pcib2
pcib0: allocated type 3 (0xf6000000-0xfbffffff) for rid 20 of pcib2
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xd000-0xefff
pcib2:   memory decode     0xf6000000-0xfbffffff
pcib2:   no prefetched decode
pcib2:   Subtractively decoded bridge.
ACPI: Found matching pin for 2.1.INTA at func 0: 255
ACPI: Found matching pin for 2.1.INTA at func 1: 255
ACPI: Found matching pin for 2.3.INTA at func 0: 11
pci_link1: BIOS IRQ 11 for 2.3.INTA is invalid
ACPI: Found matching pin for 2.0.INTA at func 0: 11
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found->	vendor=0x14e4, dev=0x16a6, revid=0x02
	domain=0, bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0xfaff0000, size 16, enabled
pcib2: allocated memory range (0xfaff0000-0xfaffffff) for rid 10 of pci0:2:0:0
pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC:0)
pcib2: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKC
found->	vendor=0x1217, dev=0x7113, revid=0x20
	domain=0, bus=2, slot=1, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0, size 12, memory disabled
found->	vendor=0x1217, dev=0x7113, revid=0x20
	domain=0, bus=2, slot=1, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0, size 12, memory disabled
found->	vendor=0x14e4, dev=0x4324, revid=0x02
	domain=0, bus=2, slot=3, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfafee000, size 13, enabled
pcib2: allocated memory range (0xfafee000-0xfafeffff) for rid 10 of pci0:2:3:0
pcib2: matched entry for 2.3.INTA (src \\_SB_.PCI0.LNKB:0)
pcib2: slot 3 INTA routed to irq 9 via \\_SB_.PCI0.LNKB
pci0:2:0:0: bad VPD cksum, remain 14
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x001002> mem 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2
bge0: CHIP ID 0x00001002; ASIC REV 0x01; CHIP REV 0x10; PCI
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: OUI 0x001018, model 0x0016, rev. 2
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: bpf attached
bge0: Ethernet address: 00:0b:db:08:52:77
cbb0: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.0 on pci2
pcib2: allocated memory range (0xf6000000-0xf6000fff) for rid 10 of cbb0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf6000000
cardbus0: <CardBus bus> on cbb0
pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0)
pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD
cbb0: PCI Configuration space:
   0x00: 0x71131217 0x04100007 0x06070020 0x00822000 
   0x10: 0xf6000000 0x020000a0 0x20040302 0xfffff000 
   0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 
   0x30: 0x00000001 0x0000fffd 0x00000001 0x0440010b 
   0x40: 0x011d1028 0x00000001 0x00000000 0x00000000 
   0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
   0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
   0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
   0x80: 0x00000000 0x00000000 0x00000000 0x018c1882 
   0x90: 0x00350003 0x00000000 0x00000000 0x00000000 
   0xa0: 0xfe020001 0x00c04000 0x00000000 0x0000000d 
   0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
   0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
   0xd0: 0x08004000 0x80820bea 0x00000000 0x00400000 
   0xe0: 0x00828000 0x00000000 0x00000000 0x00000000 
   0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb1: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.1 on pci2
pcib2: allocated memory range (0xf6001000-0xf6001fff) for rid 10 of cbb1
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf6001000
cardbus1: <CardBus bus> on cbb1
pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0)
pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD
cbb1: PCI Configuration space:
   0x00: 0x71131217 0x04100007 0x06070020 0x00822000 
   0x10: 0xf6001000 0x020000a0 0x20060502 0xfffff000 
   0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 
   0x30: 0x00000001 0x0000fffd 0x00000001 0x0440010b 
   0x40: 0x011d1028 0x00000001 0x00000000 0x00000000 
   0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
   0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
   0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
   0x80: 0x00000000 0x00000000 0x00000000 0x018c1882 
   0x90: 0x00350003 0x00000000 0x00000000 0x00000000 
   0xa0: 0xfe020001 0x00c04000 0x00000000 0x0000000d 
   0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
   0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
   0xd0: 0x08004000 0x80800bea 0x00000000 0x04400000 
   0xe0: 0x00828000 0x00000000 0x00000000 0x00000000 
   0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pci2: <network> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xb800-0xb8ff,0xbc40-0xbc7f mem 0xf4fff800-0xf4fff9ff,0xf4fff400-0xf4fff4ff irq 9 at device 31.5 on pci0
pcm0: <SigmaTel STAC9750/51 AC97 Codec (id = 0x83847650)>
pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Mixer "phin":
pcm0: Mixer "phout":
pcm0: Mixer "video":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 10dc000, 4000; 0xc2b64000 -> 10dc000
pcm0: sndbuf_setmap 10e0000, 4000; 0xc2b68000 -> 10e0000
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: fast interrupt
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xda000-0xda7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 0 of orm0
pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xdd800-0xddfff) for rid 0 of orm0
pcib0: allocated type 3 (0xde000-0xde7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 0 of orm0
pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xdf800-0xdffff) for rid 0 of orm0
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Device configuration finished.
procfs registered
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
pcm0: measured ac97 link rate at 48007 Hz, will use 48000 Hz
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
cbb1: 16-bit card inserted, but no pccard bus.
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1
(aprobe0:ata0:0:0:0): SIGNATURE: 0000
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x10000
(aprobe0:ata1:0:0:0): SIGNATURE: eb14
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
battery1: battery initialization start
pass0 at ata0 bus 0 scbus0 target 0 lun 0
pass0: <IC25N020ATCS04-0 CA2OA72A> ATA-5 device
pass0: Serial Number CSH204DMH50RPF
pass0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
pass1 at ata1 bus 0 scbus1 target 0 lun 0
pass1: <SAMSUNG CDRW/DVD SN-324B U102> Removable CD-ROM SCSI-0 device 
pass1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <IC25N020ATCS04-0 CA2OA72A> ATA-5 device
GEOM: new disk cd0
GEOM: new disk ada0
ada0: Serial Number CSH204DMH50RPF
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
(cd0:ata1:0:0:0): Retrying command (per sense data)
)
ada0: 19077MB (39070080 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
TSC timecounter disabled: C3 enabled.
Timecounter "TSC" frequency 1298926316 Hz quality -1000
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <SAMSUNG CDRW/DVD SN-324B U102> Removable CD-ROM SCSI-0 device 
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: cd present [3989280 x 2048 byte records]
pcib2: allocated memory range (0xf6010000-0xf601ffff) for rid 10 of pci0:3:0:0
unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xf6010000
cbb0: Opening memory:
cbb0: Normal: 0xf6010000-0xf601ffff
cbb0: Opening memory:
cbb0: Opening memory:
cbb0: Normal: 0xf6010000-0xf601ffff
cbb0: Opening memory:
found->	vendor=0x168c, dev=0x0013, revid=0x01
	domain=0, bus=3, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0002, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
ath0: <Atheros 5212> mem 0xf6010000-0xf601ffff irq 11 at device 0.0 on cardbus0
cbb0: Opening memory:
cbb0: Normal: 0xf6010000-0xf601ffff
ath0: unable to attach hardware; HAL status 3
cbb0: Opening memory:
device_attach: ath0 attach returned 6
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ad0s1a [rw]...
start_init: trying /sbin/init
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
drm0: <ATI Radeon Lf RV250 Mobility 9000 M9 / FireMV 2400 PCI> on vgapci0
info: [drm] AGP at 0xe0000000 128MB
info: [drm] Initialized radeon 1.31.0 20080613
agp0: Setting AGP v2 mode 4
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R200 Microcode
info: [drm] writeback test succeeded in 1 usecs
battery1: battery initialization failed, giving up
pci0: driver added
found->	vendor=0x8086, dev=0x24c6, revid=0x01
	domain=0, bus=0, slot=31, func=6
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=9
	powerspec 2  supports D0 D3  current D0
pci0:0:31:6: reprobing on driver added
pci1: driver added
pci2: driver added
found->	vendor=0x14e4, dev=0x4324, revid=0x02
	domain=0, bus=2, slot=3, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=9
	powerspec 2  supports D0 D1 D2 D3  current D0
pci0:2:3:0: reprobing on driver added
found->	vendor=0x168c, dev=0x0013, revid=0x01
	domain=0, bus=3, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0406, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
pci0:3:0:0: reprobing on driver added
ath0: <Atheros 5212> mem 0xf6010000-0xf601ffff irq 11 at device 0.0 on cardbus0
cbb0: Opening memory:
cbb0: Normal: 0xf6010000-0xf601ffff
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboG rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: AR2413 mac 7.9 RF2413 phy 4.5
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ath0: using multicast key search
wlan0: bpf attached
wlan0: bpf attached
wlan0: Ethernet address: 00:15:e9:45:a5:84
wlan0: link state changed to UP

Where the card comes up I repeated my existing workaround of kldunload
if_ath{,_pci} && kldload ....

thanks

richo

-- 
richo || Today's excuse: 

Cow-tippers tipped a cow onto the server.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-wireless/attachments/20110806/60dd7969/attachment-0001.pgp


More information about the freebsd-wireless mailing list