u3g and Vodafone k3772 (not k3772z)

[Hans Petter Selasky]

On 10/17/14 11:26, gabor at zahemszky.hu wrote:
> 2014-10-16 10:58 időpontban Hans Petter Selasky ezt írta:
>> Hi,
>>
>> You need to run 11-curent, the quirk is not in 10-branch yet.
>>
>> The following patch for 11-current should fix your device.
>>
>> Hint: You can boot a 11-current kernel with 10-xxx userland!
>>
>> Can you test the attached patch on 11-current, and report back?
>
> OK. I've upgraded to 11-CURRENT, patched in the ID-s.
> Kldloaded the u3g module (and cannot load the usb_quirk module)
> Here is the demsg output after plugging in the stick:
>
> ugen0.2: <Vodafone Huawei> at usbus0
> cdce0: <Vodafone Huawei Vodafone Mobile Broadband Huawei, class 0/0, rev
> 1.10/1.01, addr 2> on usbus0
> cdce0: faking MAC address
> umass0: <Vodafone Huawei Vodafone Mobile Broadband Huawei, class 0/0,
> rev 1.10/1.01, addr 2> on usbus0
> umass0: SCSI over Bulk-Only; quirks = 0x0000
> ue0: <USB Ethernet> on cdce0
> ue0: Ethernet address: 2a:35:81:05:00:00
> umass0:2:0: Attached to scbus2
> cd1 at umass-sim0 bus 0 scbus2 target 0 lun 0
> cd1: <Vodafone CD ROM (Huawei) 2.31> Removable CD-ROM SCSI-2 device
> cd1: 1.000MB/s transfers
> cd1: cd present [65536 x 2048 byte records]
> cd1: quirks=0x10<10YTE_ONLY>
>
> Thanks,
>
> Gabor < Gabor at Zahemszky dot HU >
>
>

Hi,

Can you show the output from "usbconfig -d X.Y dump_device_desc"?

We need to add the non-autoinstall disk ID to u3g aswell.

Thank you!

--HPS