[Bug 191432] FreeBSD 10.0-STABLE #0 r267746: panic when using ue0 network
bugzilla-noreply at freebsd.org
bugzilla-noreply at freebsd.org
Fri Jun 27 13:50:05 UTC 2014
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=191432
--- Comment #6 from Vikash Badal <vikashb at where-ever.za.net> ---
appears to be much more stable
but network speeds are terrible. < 2 MB/s
Installing ubuntu 10.0.4 sees the bus as usb 3 but Freebsd sees it as 2.0
ubuntu 10.0.4
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 6
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev=03.13
S: Manufacturer=Linux 3.13.0-24-generic xhci_hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0
D: Ver= 3.00 Cls=ff(vend.) Sub=ff Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=0b95 ProdID=1790 Rev=01.00
S: Manufacturer=ASIX Elec. Corp.
S: Product=AX88179
S: SerialNumber=00503F56011487
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=496mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=ax88179_178a
Freebsd
ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE (0mA)
ehci1 at pci0:0:29:0: class=0x0c0320 card=0x060d1028 chip=0x8c268086
rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
device = 'Lynx Point USB Enhanced Host Controller'
class = serial bus
subclass = USB
--
You are receiving this mail because:
You are the assignee for the bug.
More information about the freebsd-usb
mailing list