Fwd: USB to parallel for printer HP LaserJet 4mL
Matthias Apitz
guru at unixarea.de
Sun Jun 1 13:00:32 UTC 2014
El día Monday, May 19, 2014 a las 08:45:01PM +0200, Datasmurf escribió:
> Hello,
>
> i bought a few years ago, a parallel to usb cable from LogiLink [1].
> It used to work fine with freebsd.
>
> [1] http://www.logilink.eu/showproduct/AU0003C.htm
Hello,
I bought this device now and it attaches as:
Jun 1 11:02:12 La-Habana kernel: ugen1.2: <Prlific Technology Inc.> at usbus1
Jun 1 11:02:12 La-Habana kernel: ulpt0: <Prlific Technology Inc. IEEE-1284 Controller, class 0/0, rev 1.00/2.00, addr 2> on usbus1
Jun 1 11:02:12 La-Habana kernel: ulpt0: using bi-directional mode
# usbconfig -u 1 -a 2 dump_device_desc
ugen1.2: <IEEE-1284 Controller Prlific Technology Inc.> at usbus1, cfg=0
md=HOST spd=FULL (12Mbps) pwr=ON (100mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0100
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0008
idVendor = 0x067b
idProduct = 0x2305
bcdDevice = 0x0200
iManufacturer = 0x0001 <Prlific Technology Inc.>
iProduct = 0x0002 <IEEE-1284 Controller>
iSerialNumber = 0x0000 <no string>
bNumConfigurations = 0x0001
# uname -a
FreeBSD La-Habana 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r250588M: Sat Jun
22 14:15:48 CEST 2013...
but I can not send data to the device:
# cat Pango/my1st.ps > /dev/ulpt0
cat: stdout: Input/output error
# cat Pango/my1st.ps > /dev/unlpt0
cat: stdout: Input/output error
Any ideas?
matthias
--
Matthias Apitz | /"\ ASCII Ribbon Campaign:
E-mail: guru at unixarea.de | \ / - No HTML/RTF in E-mail
WWW: http://www.unixarea.de/ | X - No proprietary attachments
phone: +49-170-4527211 | / \ - Respect for open standards
| en.wikipedia.org/wiki/ASCII_Ribbon_Campaign
More information about the freebsd-usb
mailing list