ATP USB flash failure (regression?)

[Gerrit Kühn]

On Thu, 23 Jan 2014 10:54:40 +0100 Hans Petter Selasky <hps at bitfrost.no>
wrote about Re: ATP USB flash failure (regression?):

HPS> The "set_config" command should be after the "add quirk" command. Any 
HPS> difference?

Um, no?

---
root at mclane:~ # usbconfig -d 1.4 add_quirk UQ_MSC_NO_SYNC_CACHE
root at mclane:~ # usbconfig -d 1.1 set_config 255
root at mclane:~ # usbconfig -d 1.1 set_config 0
root at mclane:~ # usbconfig -d 1.4 reset

uhub1: at usbus1, port 1, addr 1 (disconnected)
ugen1.2: <vendor 0x8087> at usbus1 (disconnected)
uhub3: at uhub1, port 1, addr 2 (disconnected)
ugen1.3: <vendor 0x04d9> at usbus1 (disconnected)
ukbd1: at uhub3, port 3, addr 3 (disconnected)
ums1: at uhub3, port 3, addr 3 (disconnected)
ugen1.4: <ATP Electronics> at usbus1 (disconnected)
umass0: at uhub3, port 5, addr 4 (disconnected)
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus1 uhub3: 8 ports with 8 removable, self powered
ugen1.3: <vendor 0x04d9> at usbus1
ukbd1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 3> on
usbus1 kbd3 at ukbd1
ums1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 3> on
usbus1 ums1: 5 buttons and [XYZ] coordinates ID=1
ugen1.4: <ATP Electronics> at usbus1
umass0: <ATP Electronics ATP IG eUSB SSD, class 0/0, rev 2.00/11.00, addr
4> on usbus1 umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:8:0:-1: Attached to scbus8
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
umass0: at uhub3, port 5, addr 4 (disconnected)
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Error 5, Retries exhausted
umass0: <ATP Electronics ATP IG eUSB SSD, class 0/0, rev 2.00/11.00, addr
4> on usbus1 umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:8:0:-1: Attached to scbus8
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Error 5, Retries exhausted
---



cu
  Gerrit