ATP USB flash failure (regression?)

[Gerrit Kühn]

On Wed, 22 Jan 2014 15:38:44 +0100 Hans Petter Selasky <hps at bitfrost.no>
wrote about Re: ATP USB flash failure (regression?):

HPS> > Well, plugging is not entirely easy in this case, because this
HPS> > device is sitting directly on USB header pins on the mainboard. But
HPS> > I'll give it a try.

HPS> usbconfig -d X.Y reset
HPS> also does the trick.

Yes, reset works, and the device gets rescanned. But it is still using the
same quirks and fails:

umass0: at uhub3, port 5, addr 4 (disconnected)
umass0: <ATP Electronics ATP IG eUSB SSD, class 0/0, rev 2.00/11.00, addr
4> on usbus1 umass0:  SCSI over Bulk-Only; quirks = 0x4101
umass0:8:0:-1: Attached to scbus8
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command



cu
  Gerrit