usb/185968: PocketBook Pro 912 USB connection problem

Derban Dmitri derbandn at yahoo.com
Tue Jan 21 16:30:00 UTC 2014


>Number:         185968
>Category:       usb
>Synopsis:       PocketBook Pro 912 USB connection problem
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-usb
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Jan 21 16:30:00 UTC 2014
>Closed-Date:
>Last-Modified:
>Originator:     Derban Dmitri
>Release:        FreeBSD 9.1-RELEASE-p7 amd64
>Organization:
>Environment:
FreeBSD admin 9.1-RELEASE-p7 FreeBSD 9.1-RELEASE-p7 #0: Mon Sep  9 21:34:37 UTC 2013     root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC  amd64
>Description:
 When connecting PocketBook 912 Pro to USB port, system shows the following output:

Jan 17 19:24:52 admin kernel: ugen0.3: <PB> at usbus0
Jan 17 19:24:52 admin kernel: umass0: <PB PocketBook, class 0/0, rev 2.00/3.24, addr 3> on usbus0
Jan 17 19:24:52 admin kernel: umass0:  SCSI over Bulk-Only; quirks = 0x0100
Jan 17 19:24:52 admin kernel: umass0:5:0:-1: Attached to scbus5

        It seems like system can't recognize it as mass storage device. As result, mount is impossible.

usbconfig dump_device_desc

ugen0.3: <PocketBook PB> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON

bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x0525
  idProduct = 0xa4a5
  bcdDevice = 0x0324
  iManufacturer = 0x0001  <retrieving string failed>
  iProduct = 0x0002  <retrieving string failed>
  iSerialNumber = 0x0003  <retrieving string failed>
  bNumConfigurations = 0x0001

>How-To-Repeat:
just connect PocketBook 912 Pro to USB port
>Fix:
1 Remove device from port;

2 run the following command as root: usbconfig add_quirk UQ_MSC_NO_SYNC_CACHE;

3 attach device.

 System messages after command above and device attach:
Jan 17 19:27:05 admin kernel: ugen0.3: <PB> at usbus0
Jan 17 19:27:05 admin kernel: umass0: <Mass Storage> on usbus0
Jan 17 19:27:05 admin kernel: umass0:  SCSI over Bulk-Only; quirks = 0x4000
Jan 17 19:27:05 admin kernel: umass0:5:0:-1: Attached to scbus5
Jan 17 19:27:05 admin kernel: da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
Jan 17 19:27:05 admin kernel: da0: < PB 0324> Removable Direct Access SCSI-2 device
Jan 17 19:27:05 admin kernel: da0: 40.000MB/s transfers
Jan 17 19:27:05 admin kernel: da0: 954MB (1955232 512 byte sectors: 64H 32S/T 954C)

For now it can be mounted as DOS fs.


>Release-Note:
>Audit-Trail:
>Unformatted:


More information about the freebsd-usb mailing list