GPS ports in uhso

[Hans Petter Selasky]

Hi Johannes,

Can you make a properly formatted patch when this feature is tested and 
works?

--HPS

On 01/13/14 10:03, Fredrik Lindberg wrote:
> On 13.01.2014 03:28, Lundberg, Johannes wrote:
>> Hi
>>
>> I've been playing around getting GPS working with my GTM661W and the
>> uhso driver.
>>
>> The ports are defined in uhso.c but in the method
>> uhso_probe_iface_auto
>> the GPS and GPSCTL ports are not in the switch(port) case. Is there a
>> reason for this?
>>
>
> The only reason is that I didn't have a modem with a GPS port to test with
> when I wrote it, so I never added it since I didn't know if anything else
> was needed to get it working.
>
>> I tried simply adding like this
>>
>> 823 case UHSO_PORT_TYPE_MODEM:
>> 824 return (UHSO_IFACE_SPEC(UHSO_IF_BULK,
>> 825 UHSO_PORT_SERIAL, port));
>> 826 case UHSO_PORT_TYPE_MSD:
>>
>> to
>>
>> 823 case UHSO_PORT_TYPE_GPS:
>>  824 case UHSO_PORT_TYPE_GPSCTL:
>> 825 case UHSO_PORT_TYPE_MODEM:
>> 826 return (UHSO_IFACE_SPEC(UHSO_IF_BULK,
>> 827 UHSO_PORT_SERIAL, port));
>> 828 case UHSO_PORT_TYPE_MSD:
>>
>> Sorry for the manual patch. I can send a patch file later if needed.
>>  I don't have an antenna at the moment so I can't confirm that the
>> data is accurate
>> but I'm getting output similar to what I expect in the GPS port and I
>> can control it via the GPSCTL port.
>>
>
> If you get GPS data and are able to use the port, then just add it :)
>
> Fredrik
>
> _______________________________________________
> freebsd-usb at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-usb
> To unsubscribe, send any mail to "freebsd-usb-unsubscribe at freebsd.org"
>
>