usb/173722: XHCI driver bug after suspend to ram (ACPI S3 mode)
Florian Jung
florian.a.jung at web.de
Mon Nov 19 21:10:02 UTC 2012
The following reply was made to PR usb/173722; it has been noted by GNATS.
From: Florian Jung <florian.a.jung at web.de>
To: Hans Petter Selasky <hselasky at c2i.net>
Cc: freebsd-usb at freebsd.org, freebsd-gnats-submit at freebsd.org
Subject: Re: usb/173722: XHCI driver bug after suspend to ram (ACPI S3 mode)
Date: Mon, 19 Nov 2012 22:07:12 +0100
This is an OpenPGP/MIME signed message (RFC 2440 and 3156)
--------------enig64F0B7CF7B9CE9B2E0868F3C
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Am 19.11.2012 20:52, schrieb Hans Petter Selasky:
> On Monday 19 November 2012 20:21:47 Florian Jung wrote:
>> Am 19.11.2012 19:21, schrieb Hans Petter Selasky:
>>> On Monday 19 November 2012 16:36:45 Florian Jung wrote:
>>>>> Number: 173722
>>>>> Category: usb
>>>>> Synopsis: XHCI driver bug after suspend to ram (ACPI S3 mode)=
>>>>> Confidential: no
>>>>> Severity: non-critical
>>>>> Priority: low
>>>>> Responsible: freebsd-usb
>>>>> State: open
>>>>> Quarter:
>>>>> Keywords:
>>>>> Date-Required:
>>>>> Class: sw-bug
>>>>> Submitter-Id: current-users
>>>>> Arrival-Date: Mon Nov 19 15:40:00 UTC 2012
>>>>> Closed-Date:
>>>>> Last-Modified:
>>>>> Originator: Florian Jung
>>>>> Release: 9.0-RELEASE-p3
>>>>> Organization:
>>>>
>>>>> Environment:
>>>> FreeBSD beastie 9.0-RELEASE-p3 FreeBSD 9.0-RELEASE-p3 #0: Tue Jun 12=
>>>> 02:52:29 UTC 2012
>>>> root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd=
64
>>>>
>>>>> Description:
>>>> After entering and waking up from suspend to ram aka ACPI S3 state, =
the
>>>> dmesg get flooded with "xhci_interrupt: host controller halted", and=
my
>>>> USB3.0 device stops working.
>>>>
>>>> (It is a external hard disk drive, and the device node just vanished=
and
>>>> won't re-appear)
>>>>
>>>> My USB2.0 and 1.x devices however do still work.
>>>>
>>>> It seems that i can provoke the generation of these "xhci_interrupt:=
>>>> host controller halted" messages by typing on my USB-2.0-Keyboard or=
by
>>>> moving my USB-2.0-Mouse.
>>>>
>>>>> How-To-Repeat:
>>>> - Start up FreeBSD
>>>> - Plug in USB3.0 Harddisk
>>>> - It will work.
>>>> - sudo acpiconf -S 3
>>>> - re-awake the computer
>>>> - ls /dev/ tells you that the harddisk is gone
>>>> - dmesg tells you the "xhci_interrupt: host controller halted" messa=
ges.
>>>> - replug the harddisk
>>>> - it still does not work.
>>>
>>> If you unplug the harddisk before the suspend, does it work afterward=
s
>>> then?
>>>
>>> --HPS
>>
>> No, that causes the same problem.
>> I don't even need to attach it: boot freebsd, enter acpi s3, wake up,
>> and then plug in the disk leads to the same problem.
>>
>> i have found out that compiling XHCI has loadable module, and unloadin=
g
>> it before suspend and re-loading it afterwards solves the problem.
>>
>> the "xhci_interrupt: host controller halted"-messages don't appear, an=
d
>> i can use my harddisk afterwards.
>>
>> looks like xhci is failing to reinitalize properly after suspend?
>>
>> greetings,
>> flo
>=20
> Hi,
>=20
> Do you have a USB 3.0 compatible BIOS?
>=20
> I think we might need to halt the XHCI as part of the resume process. C=
an you=20
> try this patch:
>=20
> diff --git a/sys/dev/usb/controller/xhci.c b/sys/dev/usb/controller/xhc=
i.c
> index 756b1ed..576ed71 100644
> --- a/sys/dev/usb/controller/xhci.c
> +++ b/sys/dev/usb/controller/xhci.c
> @@ -578,6 +578,8 @@ xhci_set_hw_power_sleep(struct usb_bus *bus, uint32=
_t=20
> state)
> xhci_halt_controller(sc);
> break;
> case USB_HW_POWER_RESUME:
> + DPRINTF("Halting the XHCI\n");
> + xhci_halt_controller(sc);
> DPRINTF("Starting the XHCI\n");
> xhci_start_controller(sc);
> break;
>=20
>=20
> --HPS
>=20
Hi
i have a USB3.0-compatible BIOS.
uhm, i am unable to apply this patch. my xhci.c file looks pretty
different, there is no xhci_set_hw_power_sleep function, but there are
xhci_suspend() and xhci_resume(). both are empty and contain only a /*
XXX TODO */
uname -r now reports 9.0-RELEASE-p4, btw, i must have mistyped that :/
i've set up my freebsd system ~2 months ago, and ran freebsd-update
fetch install today. that are the kernel sources i'm using.
there is a line: __FBSDID("$FreeBSD:
release/9.0.0/sys/dev/usb/controller/xhci.c 226904 2011-10-29 12:39:05Z
hselasky $");
do i have to download different sources (how?), or did you diff against
the wrong kernel tree?
(sorry, i'm a freeBSD-newbie ;) )
thanks
flo
--------------enig64F0B7CF7B9CE9B2E0868F3C
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iQEcBAEBAgAGBQJQqp+AAAoJEHPd9QK/nPqlkbMH/0rXXl56OCqLswtxO2o0iUg/
/Pw6covi1+z2K8nugwp5oPic2lC73WmdVd2jT2m57LPlGuBqR7XxAaFKtk16us9Y
pqOvinKjKcv8q+GKDk7G8TmEn512Nm8/7e9Wsd3BdMLuvx0w0keqExnEbGCsjtao
OUb94RdgOUbI8zS2054/moLhmhiwDix4gf2UEVyWSlyAmcWE6zoCpXTD/fK9X/x4
i2PL6cM4wbIIgsDmzfaS6/gv1NVCHqw3ltTrpSFsinT4jQYatgvAqLam0Cp+EqwI
c17bkXedl7eS9X4jCj5G8vfR7OOu3xQtN3FUscpJN+pgKCpenD86/o3pEI4n+ZQ=
=ob+r
-----END PGP SIGNATURE-----
--------------enig64F0B7CF7B9CE9B2E0868F3C--
More information about the freebsd-usb
mailing list