ICY BOX Sata USB box runs ar 1M instead of 40M+
Julian H. Stacey
jhs at berklix.com
Sat Mar 10 14:31:20 UTC 2012
Hi USB folks,
For external disk enclosure, trade name "ICY BOX"
/var/log messages shows USB configuring for 1.000MB/s
The cardboard box I bought it in from shop says
1 x 2.5" SATA, 1 x USB 3.0 IB-231StU3
http://www.icybox.de ->
http://www.raidsonic.de/en/products/details.php?we_objectID=7564
Clicking Spec says: USB 3.0 up to 5 Gbit/s
The HP notebook
http://berklix.com/~jhs/hardware/hp/pavilion/dm3-1155ea
has 4 USB 2.0 ports.
If I connect a USB stick on the same port, the notebook offers 40M.
The disk on all 4 ports only offers 1M.
I tried external power to disk too, no help
(well I'd hoped maybe low V might have sabotaged negotiation - long shot ;-)
I suspect/ hope I just need to do a quirk table entry ? Hints please ?
8.2-RELEASE amd64,
I'd prefer to stay on 8.2 but I have a smallish space for a temporary current or 9 if I have to.
/var/log/messages:
ugen0.2: <01234567890123456789012345678901234567890123> at usbus0
umass0: <01234567890123456789012345678901234567890123 012345678901234567890123456789012345678901234567, class 0/0, rev 2.10/1.00, addr 2> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <WDC WD25 00BEKT-60A25T1 02.0> Fixed Direct Access SCSI-5 device
da0: 1.000MB/s transfers
da0: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
/sbin/devd -f /dev/null -d -D (extract)
Processing event '+ugen0.2 vendor=0x174c product=0x55aa devclass=0x00 devsubclass=0x00 sernum="0123456789ABCDEF0188" release=0x0100 at port=2 on ugen0.1'
Pushing table
setting device-name=ugen0.2
setting vendor=0x174c
setting product=0x55aa
setting devclass=0x00
setting devsubclass=0x00
setting sernum=0123456789ABCDEF0188
setting release=0x0100
Processing attach event
Popping table
Processing event '!system=USB subsystem=DEVICE type=ATTACH cdev=ugen0.2 vendor=0x174c product=0x55aa devclass=0x00 devsubclass=0x00 sernum="0123456789ABCDEF0188" release=0x0100 mode=host port=2 parent=ugen0.1'
Pushing table
setting system=USB
setting subsystem=DEVICE
setting type=ATTACH
setting cdev=ugen0.2
setting vendor=0x174c
setting product=0x55aa
setting devclass=0x00
setting devsubclass=0x00
setting sernum=0123456789ABCDEF0188
setting release=0x0100
setting mode=host
setting port=2
setting parent=ugen0.1
Processing notify event
Popping table
Processing event '!system=USB subsystem=INTERFACE type=ATTACH cdev=ugen0.2 vendor=0x174c product=0x55aa devclass=0x00 devsubclass=0x00 sernum="0123456789ABCDEF0188" release=0x0100 mode=host interface=0 endpoints=2 intclass=0x08 intsubclass=0x06 intprotocol=0x50'
Pushing table
setting system=USB
setting subsystem=INTERFACE
setting type=ATTACH
setting cdev=ugen0.2
setting vendor=0x174c
setting product=0x55aa
setting devclass=0x00
setting devsubclass=0x00
setting sernum=0123456789ABCDEF0188
setting release=0x0100
setting mode=host
setting interface=0
setting endpoints=2
setting intclass=0x08
setting intsubclass=0x06
setting intprotocol=0x50
Processing notify event
Popping table
Processing event '? at bus=1 hubaddr=2 port=0 devaddr=2 interface=0 vendor=0x174c product=0x55aa devclass=0x00 devsubclass=0x00 sernum="0123456789ABCDEF0188" release=0x0100 intclass=0x08 intsubclass=0x06 on uhub0'
Pushing table
setting bus=1
setting hubaddr=2
setting port=0
setting devaddr=2
setting interface=0
setting vendor=0x174c
setting product=0x55aa
setting devclass=0x00
setting devsubclass=0x00
setting sernum=0123456789ABCDEF0188
setting release=0x0100
setting intclass=0x08
setting intsubclass=0x06
setting bus=uhub0
Processing nomatch event
Popping table
Processing event '+umass0 vendor=0x174c product=0x55aa devclass=0x00 devsubclass=0x00 sernum="0123456789ABCDEF0188" release=0x0100 intclass=0x08 intsubclass=0x06 at bus=1 hubaddr=2 port=0 devaddr=2 interface=0 vendor=0x174c product=0x55aa devclass=0x00 devsubclass=0x00 sernum="0123456789ABCDEF0188" release=0x0100 intclass=0x08 intsubclass=0x06 on uhub0'
Pushing table
setting device-name=umass0
setting vendor=0x174c
setting product=0x55aa
setting devclass=0x00
setting devsubclass=0x00
setting sernum=0123456789ABCDEF0188
setting release=0x0100
setting intclass=0x08
setting intsubclass=0x06
Processing attach event
Popping table
Processing event '!system=DEVFS subsystem=CDEV type=CREATE cdev=pass0'
Pushing table
setting system=DEVFS
setting subsystem=CDEV
setting type=CREATE
setting cdev=pass0
Cheers,
Julian
--
Julian Stacey, BSD Unix Linux C Sys Eng Consultants Munich http://berklix.com
Reply below not above, cumulative like a play script, & indent with "> ".
Format: Plain text. Not HTML, multipart/alternative, base64, quoted-printable.
Mail from @yahoo dumped @berklix. http://berklix.org/yahoo/
More information about the freebsd-usb
mailing list