[usb] Kingston 8Gb is not usable

[Alexander Motin]

On 06/27/12 11:07, Boris Samorodov wrote:
> 26.06.2012 20:19, Alexander Motin пишет:
>
>> I see no problems in this output. I would enable more debugging with
>> `camcontrol debug -IPp all` before plugging it in to see what's going on.
>
> Here it is:
> -----
> sudo:     bsam : TTY=pts/5 ; PWD=/home/bsam ; USER=root ;
> COMMAND=/sbin/camcontrol debug -IPp all
> kernel: (xpt0:xpt0:0:-1:-1): debugging flags now 61
> kernel: ugen7.2: <Kingston> at usbus7
> kernel: umass0: <Kingston DT101 II, class 0/0, rev 2.00/1.00, addr 2> on
> usbus7
> kernel: umass0:  SCSI over Bulk-Only; quirks = 0x0100
> kernel: (noperiph:umass-sim0:0:-1:-1): xpt_async(AC_PATH_REGISTERED)
> kernel: umass0:11:0:-1: Attached to scbus11
> kernel: (probe0:umass-sim0:0:0:0): Periph created
> kernel: (probe0:umass-sim0:0:0:0): Probe started
> kernel: (probe0:umass-sim0:0:0:0): Probe PROBE_INVALID to PROBE_INQUIRY
> kernel: (probe0:umass-sim0:0:0:0): Probe PROBE_INQUIRY to
> PROBE_SUPPORTED_VPD_LIST
> kernel: (probe0:umass-sim0:0:0:0): Probe PROBE_SUPPORTED_VPD_LIST to
> PROBE_DEVICE_ID
> kernel: (probe0:umass-sim0:0:0:0): Probe PROBE_DEVICE_ID to
> PROBE_SERIAL_NUM
> kernel: (probe0:umass-sim0:0:0:0): Probe PROBE_SERIAL_NUM to
> PROBE_TUR_FOR_NEGOTIATION
> kernel: (probe0:umass-sim0:0:0:0): xpt_async(AC_FOUND_DEVICE)
> kernel: (pass4:umass-sim0:0:0:0): Periph created
> kernel: (da0:umass-sim0:0:0:0): Periph created
> kernel: (probe0:umass-sim0:0:0:0): Probe PROBE_TUR_FOR_NEGOTIATION to
> PROBE_DONE
> kernel: (probe0:umass-sim0:0:0:0): Probe completed
> kernel: (probe0:umass-sim0:0:0:0): Periph invalidated
> kernel: (probe0:umass-sim0:0:0:0): Periph destroyed
> kernel: da0 at umass-sim0 bus 0 scbus11 target 0 lun 0
> kernel: da0: <Kingston DT101 II 1.00> Removable Direct Access SCSI-2 device
> kernel: da0: 40.000MB/s transfers
> kernel: da0: 7634MB (15636304 512 byte sectors: 255H 63S/T 973C)

Up to this point everything is fine, but here problems begin.

> kernel: (da0:umass-sim0:0:0:0): daopen
> kernel: (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0
> 0 0 1 0
> kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present
> kernel: (da0:umass-sim0:0:0:0): Retrying command (per sense data)
> kernel: (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0
> 0 0 1 0
> kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present
> kernel: (da0:umass-sim0:0:0:0): Error 5, Retries exhausted
> kernel: (da0:umass-sim0:0:0:0): daclose
> kernel: (da0:umass-sim0:0:0:0): SYNCHRONIZE CACHE(10). CDB: 35 0 0 0 0 0
> 0 0 0 0
> kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present
> kernel: (da0:umass-sim0:0:0:0): Retrying command (per sense data)
> kernel: (da0:umass-sim0:0:0:0): SYNCHRONIZE CACHE(10). CDB: 35 0 0 0 0 0
> 0 0 0 0
> kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present
> kernel: (da0:umass-sim0:0:0:0): Error 5, Retries exhausted
> kernel: (da0:umass-sim0:0:0:0): daopen
> kernel: (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0
> 0 0
> kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present
> kernel: (da0:umass-sim0:0:0:0): Retrying command (per sense data)
> kernel: (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0
> 0 0
> kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present
> kernel: (da0:umass-sim0:0:0:0): Retrying command (per sense data)
> kernel: (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0
> 0 0
> kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present
> kernel: (da0:umass-sim0:0:0:0): Retrying command (per sense data)
> kernel: (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0
> 0 0
> kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present
> kernel: (da0:umass-sim0:0:0:0): Retrying command (per sense data)
> kernel: (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0
> 0 0
> kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
> kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition
> kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present
> kernel: (da0:umass-sim0:0:0:0): Error 5, Retries exhausted
> kernel: (da0:umass-sim0:0:0:0): got CAM status 0x8c
> kernel: (da0:umass-sim0:0:0:0): fatal error, failed to attach to device
> kernel: (da0:umass-sim0:0:0:0): Periph invalidated
> kernel: (da0:umass-sim0:0:0:0): lost device - 0 outstanding, 4 refs
> kernel: (da0:umass-sim0:0:0:0): removing device entry
> kernel: (da0:umass-sim0:0:0:0): Periph destroyed

Something is wrong there. I think this should not happen:
kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
kernel: (da0:umass-sim0:0:0:0): SCSI status: Check Condition
kernel: (da0:umass-sim0:0:0:0): SCSI sense: No sense data present

Two questions: 1) what originally caused these errors and 2) why "No 
sense data present". I am not sure whether it is device problem or umass 
or both. I can't reproduce it with devices I have. Could you also show 
your old error messages (preferably verbose) to compare?

-- 
Alexander Motin