usb power output issues
Mark Felder
feld at feld.me
Wed Jun 6 15:38:57 UTC 2012
Hi all,
I have a Dell OptiPlex 390. There are several in the office, but mine is
the only one that runs FreeBSD. I'm currently running FreeBSD 9.0-STABLE
#4 r234571, but this has happened on several previous builds as well. I've
never run an 8.x branch on this hardware.
Sometimes when I come into the office -- perhaps once a week -- I'll find
that my nice keyboard has stopped functioning. My mouse always works, but
the keyboard does not. I can plug in any USB keyboard and I see it
recognized by reading the console messages, but they just don't work. The
CapsLock, ScrollLock, Numlock, etc lights don't even turn on. I usually
just reboot the computer and move on, but today this happened when I was
on the phone with a customer so I knew I couldn't blame it on a
screensaver or anything whacky like that. I ended up digging out a powered
USB hub and plugging my keyboard into that. It started working as expected
at this time.
I am wondering if this is a known issue or if there is anything in the USB
stack that could cause this behavior? My PC is currently in this state and
I don't ever power it off, so if someone needs some USB diagnostics output
I can provide that. This is not a debugging kernel so I can't get you any
output from DDB at this time.
tech304# usbconfig show_ifdrv
ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE
ugen0.1.0: uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE
ugen1.1.0: uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE
ugen0.2.0: uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00,
addr 2>
ugen1.2: <product 0x0024 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE
ugen1.2.0: uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00,
addr 2>
ugen1.3: <USB 2.0 Hub MTT vendor 0x1a40> at usbus1, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE
ugen1.3.0: uhub5: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev
2.00/1.00, addr 3>
ugen1.4: <Cypress USB Keyboard PS2 Mouse Cypress> at usbus1, cfg=0
md=HOST spd=LOW (1.5Mbps) pwr=ON
ugen1.4.0: ukbd0: <EndPoint1 Interrupt>
ugen1.4.1: ums0: <EP2 Interrupt>
ugen1.5: <USB 2.0 Hub MTT vendor 0x1a40> at usbus1, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE
ugen1.5.0: uhub4: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev
2.00/1.00, addr 5>
ugen1.6: <USB Receiver Logitech> at usbus1, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen1.6.0: ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr
6>
ugen1.6.1: ums1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 6>
ugen1.6.2: uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr
6>
More information about the freebsd-usb
mailing list