usb doesn't work

[Hans Petter Selasky]

This sounds like an ACPI problem. Does your hardware have ACPI?

--HPS

On Saturday 16 October 2010 19:35:02 rufina sarvarova wrote:
> It looks like FreeBSD's pci bus code is failing to assign resources.
> What can I do with it?
> 
> *dmesg*
> ohci0: <ATI SB400 USB Controller> mem 0x80000000-0x80000fff irq 19 at
> device 19.0 on pci0
> ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 51
> ohci0: [MPSAFE]
> ohci0: [ITHREAD]
> usbus0: <ATI SB400 USB Controller> on ohci0
> ohci1: <ATI SB400 USB Controller> mem 0x80000000-0x80000fff irq 19 at
> device 19.1 on pci0
> ohci1: Could not map memory
> device_attach: ohci1 attach returned 6
> ehci0: <ATI SB400 USB 2.0 controller> mem 0x80000000-0x80000fff irq 19 at
> device 19.2 on pci0
> ehci0: Could not map memory
> device_attach: ehci0 attach returned 6
> 
> 
> *pciconf:*
> ohci0 at pci0:0:19:0: class=0x0c0310 card=0xd6018086 chip=0x43741002 rev=0x80
> hdr=0x00
> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
> device = 'IXP SB400 OHCI USB Controller'
> class = serial bus
> subclass = USB
> 
> ohci1 at pci0:0:19:1: class=0x0c0310 card=0xd6018086 chip=0x43751002 rev=0x80
> hdr=0x00
> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
> device = 'IXP SB400 OHCI USB Controller'
> class = serial bus
> subclass = USB
> 
> ehci0 at pci0:0:19:2: class=0x0c0320 card=0xd6018086 chip=0x43731002 rev=0x80
> hdr=0x00
> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
> device = 'IXP SB400 EHCI USB 2.0 Controller'
> class = serial bus
> subclass = USB
> 
> On Fri, Oct 15, 2010 at 11:16 AM, Hans Petter Selasky 
<hselasky at c2i.net>wrote:
> > On Thursday 14 October 2010 21:10:21 rufina sarvarova wrote:
> > > Hello,
> > > I can't find out what's wrong with my configs/computer..
> > > All my USB devices doesn't work in freebsd 8.1. I had windows/ubuntu at
> > > this computer and all works well.
> > > But here.. At bios usb enable, before loading freebsd usb indicator
> > > light-on, but during loading it's turns off.
> > > my dmesg here:
> > > 
> > > usbus0: <ATI SB400 USB Controller> on ohci0
> > > usbus0: 12Mbps Full Speed USB v1.0
> > > ugen0.1: <ATI> at usbus0
> > > uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> > > uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> > > usbus0: Root HUB problem, error=USB_ERR_NO_ROOT_HUB
> > > 
> > > System does not see any usb devices.
> > > 
> > >  at rc.conf I enabled hald and dbus..
> > 
> > Try to boot with verbose. Probably an error happens during OHCI attach,
> > and then the driver aborts. You can also try -current as of today.
> > 
> > --HPS
> 
> _______________________________________________
> freebsd-usb at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-usb
> To unsubscribe, send any mail to "freebsd-usb-unsubscribe at freebsd.org"