FYI: USB 3.0 support and the XHCI driver is now fully committed to FreeBSD-current

[Mark Atkinson]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 10/04/2010 16:46, Hans Petter Selasky wrote:
> http://svn.freebsd.org/changeset/base/213437
> 
> Please test if you have USB 3.0 hardware.
> 
> --HPS

I don't have 3.0, but on my amd64 machine I get this.  Not sure if this
is part of the root mount changes, usb, or mixture of both.   Machine is

[...]
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
[*** hang, hit enter on serial console bootup continues]
ugen0.1: <0x103c> at usbus0
uhub0: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <0x1166> at usbus1
uhub1: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <0x1166> at usbus2
uhub2: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <0x1166> at usbus3
uhub3: <0x1166 EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
[*** hang, hit enter twice on serial console bootup continues]
bce0: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state
= 0x00000006)
bce1: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state
= 0x00000006)
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
[*** hang, hit enter 4x, bootup continues]
uhub3: 4 ports with 4 removable, self powered
[...]
ciss0: command status 0x1 (target status) scsi status 0x2
(probe0:ciss0:0:0:0): SCSI status error
(probe0:ciss0:0:0:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0
(probe0:ciss0:0:0:0): CAM status: SCSI Status Error
(probe0:ciss0:0:0:0): SCSI status: Check Condition
(probe0:ciss0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid
command operation code)
(probe0:ciss0:0:0:0): Error 22, Unretryable error
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <COMPAQ RAID 1(1VOLUME OK> Fixed Direct Access SCSI-5 device
da0: Serial Number PAFGK0L9VWF3QU
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 139979MB (286677120 512 byte sectors: 255H 32S/T 35132C)
GEOM: new disk da0
pass0 at ciss0 bus 0 scbus0 target 0 lun 0
pass0: <COMPAQ RAID 1(1VOLUME OK> Fixed Direct Access SCSI-5 device
pass0: Serial Number PAFGK0L9VWF3QU
pass0: 135.168MB/s transfers
pass0: Command Queueing enabled
ATA PseudoRAID loaded
[...]
GEOM_LABEL[1]: MSDOSFS: da0: FAT32 volume not valid.
GEOM_LABEL[1]: UFS2 file system detected on da0a.
GEOM_LABEL[1]: Label for provider da0a is ufsid/48f52b4e5eb986c7.
GEOM_LABEL[1]: UFS2 file system detected on da0a.
GEOM_LABEL[1]: MSDOSFS: da0a: FAT32 volume not valid.
GEOM_LABEL[1]: Label for provider da0b is label/swap.
GEOM_LABEL[1]: MSDOSFS: da0b: no FAT signature found.
Root mount waiting for: usbus3 usbus0
[hang, waits forever...]

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.16 (FreeBSD)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkyrW84ACgkQrDN5kXnx8ybnDACgh61R1y6bAZv45VrNOkdWCueC
kV0AnielYry3V52T/osbHS8Lrf1YpGZH
=60EQ
-----END PGP SIGNATURE-----