...but this USB device is more than a printer!
dan
glimp at live.com
Sat Oct 2 23:38:20 UTC 2010
Hi all,
I'll go straight to the point.
Here's the output from "usbconfig dump_device_desc"
#*
ugen0.3: <Samsung SCX-4100 Series Samsung> at usbus0, cfg=0 md=HOST
spd=FULL (12Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0110
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0008
idVendor = 0x04e8
idProduct = 0x3413
bcdDevice = 0x0100
iManufacturer = 0x0001 <Samsung>
iProduct = 0x0002 <Samsung SCX-4100 Series>
iSerialNumber = 0x0003 <8J21BAKYB28091W.>
bNumConfigurations = 0x0001
#*
and here's the output from "usbconfig dump_curr_config_desc"
#*
ugen0.3: <Samsung SCX-4100 Series Samsung> at usbus0, cfg=0 md=HOST
spd=FULL (12Mbps) pwr=ON
Configuration index 0
bLength = 0x0009
bDescriptorType = 0x0002
wTotalLength = 0x0020
bNumInterfaces = 0x0001
bConfigurationValue = 0x0001
iConfiguration = 0x0000 <no string>
bmAttributes = 0x00c0
bMaxPower = 0x0000
Interface 0
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0000
bAlternateSetting = 0x0000
bNumEndpoints = 0x0002
bInterfaceClass = 0x0007
bInterfaceSubClass = 0x0001
bInterfaceProtocol = 0x0002
iInterface = 0x0000 <no string>
Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0003 <OUT>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0040
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000
Endpoint 1
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0081 <IN>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0040
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000
#*
Userland software, such as sane-find-scanner, is currently sure this is
is just a printer. I would like this device to introduce itself for what
it is ... a printer + a color scanner.
Is it feasible? Are there any well-established techniques to (try to)
reach the goal?
Thanks for any link/suggestion
d
More information about the freebsd-usb
mailing list