Motorola TER/GUSB3-E Ralink Wireless USB

Hans Petter Selasky hselasky at c2i.net
Thu Nov 11 16:55:54 UTC 2010


On Thursday 11 November 2010 17:36:38 Emanuel Haupt wrote:
> Hans Petter Selasky <hselasky at c2i.net> wrote:
> > On Thursday 11 November 2010 17:00:00 Emanuel Haupt wrote:
> > > I've got a Motorola TER/GUSB3-E Wireless USB stick that identifies
> > > itself as:
> > > 
> > > # /var/log/messages
> > > 
> > > Nov 11 13:40:07 wiggles kernel: ugen1.3: <Ralink> at usbus1
> > > Nov 11 13:40:07 wiggles kernel: umass0: <Ralink 802.11 bg WLAN,
> > > class 0/0, rev 2.00/0.01, addr 3> on usbus1 Nov 11 13:40:09 wiggles
> > > kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0
> > > 0 Nov 11 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): CAM
> > > status: SCSI Status Error Nov 11 13:40:09 wiggles kernel:
> > > (probe0:umass-sim0:0:0:0): SCSI status: Check Condition Nov 11
> > > 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): SCSI sense: NOT
> > > READY asc:3a,0 (Medium not present) Nov 11 13:40:09 wiggles kernel:
> > > cd1 at umass-sim0 bus 0 scbus2 target 0 lun 0 Nov 11 13:40:09
> > > wiggles kernel: cd1: <Motorola USB Card > Removable CD-ROM SCSI-0
> > > device Nov 11 13:40:09 wiggles kernel: cd1: 40.000MB/s transfers
> > > Nov 11 13:40:09 wiggles kernel: cd1: Attempt to query device size
> > > failed: NOT READY, Medium not present
> > > 
> > > # usbconfig -u 1 -a 3 dump_curr_config_desc
> > > ugen1.3: <802.11 bg WLAN Ralink> at usbus1, cfg=0 md=HOST spd=HIGH
> > > (480Mbps) pwr=ON
> > > 
> > >  Configuration index 0
> > >  
> > >     bLength = 0x0009
> > >     bDescriptorType = 0x0002
> > >     wTotalLength = 0x0020
> > >     bNumInterfaces = 0x0001
> > >     bConfigurationValue = 0x0001
> > >     iConfiguration = 0x0000  <no string>
> > >     bmAttributes = 0x0080
> > >     bMaxPower = 0x00c8
> > >     
> > >     Interface 0
> > >     
> > >       bLength = 0x0009
> > >       bDescriptorType = 0x0004
> > >       bInterfaceNumber = 0x0000
> > >       bAlternateSetting = 0x0000
> > >       bNumEndpoints = 0x0002
> > >       bInterfaceClass = 0x0008
> > >       bInterfaceSubClass = 0x0006
> > >       bInterfaceProtocol = 0x0050
> > >       iInterface = 0x0000  <no string>
> > >      
> > >      Endpoint 0
> > >      
> > >         bLength = 0x0007
> > >         bDescriptorType = 0x0005
> > >         bEndpointAddress = 0x0081  <IN>
> > >         bmAttributes = 0x0002  <BULK>
> > >         wMaxPacketSize = 0x0200
> > >         bInterval = 0x0000
> > >         bRefresh = 0x0000
> > >         bSynchAddress = 0x0000
> > >      
> > >      Endpoint 1
> > >      
> > >         bLength = 0x0007
> > >         bDescriptorType = 0x0005
> > >         bEndpointAddress = 0x0001  <OUT>
> > >         bmAttributes = 0x0002  <BULK>
> > >         wMaxPacketSize = 0x0200
> > >         bInterval = 0x0000
> > >         bRefresh = 0x0000
> > >         bSynchAddress = 0x0000
> > > 
> > > Unfortunately it's not recognized by the ural driver. Has anyone an
> > > idea what I could try? Add a usb device ID somewhere?
> > 
> > Hi,
> > 
> > If you use the "dump_device_desc" command you get the idVendor and
> > idProduct you need for the ID-table in sys/dev/usb/wlan/if_ural.c .
> > 
> > --HPS
> 
> It's:
> 
> ugen1.3: <802.11 bg WLAN Ralink> at usbus1, cfg=0 md=HOST spd=HIGH
> (480Mbps) pwr=ON
> 
>   bLength = 0x0012
>   bDescriptorType = 0x0001
>   bcdUSB = 0x0200
>   bDeviceClass = 0x0000
>   bDeviceSubClass = 0x0000
>   bDeviceProtocol = 0x0000
>   bMaxPacketSize0 = 0x0040
>   idVendor = "
>   idProduct = 0x2578
>   bcdDevice = 0x0001
>   iManufacturer = 0x0001  <Ralink>
>   iProduct = 0x0002  <802.11 bg WLAN>
>   iSerialNumber = 0x0003  <retrieving string failed>
>   bNumConfigurations = 0x0001
> 
> I guess I'll have to fit "0x148f" in there somewhere - not sure exactly
> where to add though. Any help would be appreciated.
> 
> Emanuel

I guess you can:

grep -rE "RALINK.*RT2573" /sys/dev/usb/

And duplicate one of those entries.

--HPS


More information about the freebsd-usb mailing list