Motorola TER/GUSB3-E Ralink Wireless USB
Hans Petter Selasky
hselasky at c2i.net
Thu Nov 11 16:05:54 UTC 2010
On Thursday 11 November 2010 17:00:00 Emanuel Haupt wrote:
> I've got a Motorola TER/GUSB3-E Wireless USB stick that identifies itself
> as:
>
> # /var/log/messages
>
> Nov 11 13:40:07 wiggles kernel: ugen1.3: <Ralink> at usbus1
> Nov 11 13:40:07 wiggles kernel: umass0: <Ralink 802.11 bg WLAN, class 0/0,
> rev 2.00/0.01, addr 3> on usbus1 Nov 11 13:40:09 wiggles kernel:
> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 Nov 11
> 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0): CAM status: SCSI
> Status Error Nov 11 13:40:09 wiggles kernel: (probe0:umass-sim0:0:0:0):
> SCSI status: Check Condition Nov 11 13:40:09 wiggles kernel:
> (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not
> present) Nov 11 13:40:09 wiggles kernel: cd1 at umass-sim0 bus 0 scbus2
> target 0 lun 0 Nov 11 13:40:09 wiggles kernel: cd1: <Motorola USB Card >
> Removable CD-ROM SCSI-0 device Nov 11 13:40:09 wiggles kernel: cd1:
> 40.000MB/s transfers
> Nov 11 13:40:09 wiggles kernel: cd1: Attempt to query device size failed:
> NOT READY, Medium not present
>
> # usbconfig -u 1 -a 3 dump_curr_config_desc
> ugen1.3: <802.11 bg WLAN Ralink> at usbus1, cfg=0 md=HOST spd=HIGH
> (480Mbps) pwr=ON
>
>
> Configuration index 0
>
> bLength = 0x0009
> bDescriptorType = 0x0002
> wTotalLength = 0x0020
> bNumInterfaces = 0x0001
> bConfigurationValue = 0x0001
> iConfiguration = 0x0000 <no string>
> bmAttributes = 0x0080
> bMaxPower = 0x00c8
>
> Interface 0
> bLength = 0x0009
> bDescriptorType = 0x0004
> bInterfaceNumber = 0x0000
> bAlternateSetting = 0x0000
> bNumEndpoints = 0x0002
> bInterfaceClass = 0x0008
> bInterfaceSubClass = 0x0006
> bInterfaceProtocol = 0x0050
> iInterface = 0x0000 <no string>
>
> Endpoint 0
> bLength = 0x0007
> bDescriptorType = 0x0005
> bEndpointAddress = 0x0081 <IN>
> bmAttributes = 0x0002 <BULK>
> wMaxPacketSize = 0x0200
> bInterval = 0x0000
> bRefresh = 0x0000
> bSynchAddress = 0x0000
>
> Endpoint 1
> bLength = 0x0007
> bDescriptorType = 0x0005
> bEndpointAddress = 0x0001 <OUT>
> bmAttributes = 0x0002 <BULK>
> wMaxPacketSize = 0x0200
> bInterval = 0x0000
> bRefresh = 0x0000
> bSynchAddress = 0x0000
>
> Unfortunately it's not recognized by the ural driver. Has anyone an idea
> what I could try? Add a usb device ID somewhere?
>
Hi,
If you use the "dump_device_desc" command you get the idVendor and idProduct
you need for the ID-table in sys/dev/usb/wlan/if_ural.c .
--HPS
More information about the freebsd-usb
mailing list