usb/143294: copying process stops at some time (10 - 50
seconds) from usb disk only nForce motherboards in
8.0-RELEASE/STABLE
Hans Petter Selasky
hselasky at c2i.net
Wed Jan 27 17:28:47 UTC 2010
On Wednesday 27 January 2010 17:45:18 Alexey wrote:
> >Number: 143294
> >Category: usb
> >Synopsis: copying process stops at some time (10 - 50 seconds) from
> > usb disk only nForce motherboards in 8.0-RELEASE/STABLE Confidential:
> > no
> >Severity: serious
> >Priority: medium
> >Responsible: freebsd-usb
> >State: open
> >Quarter:
> >Keywords:
> >Date-Required:
> >Class: sw-bug
> >Submitter-Id: current-users
> >Arrival-Date: Wed Jan 27 16:50:01 UTC 2010
> >Closed-Date:
> >Last-Modified:
> >Originator: Alexey
> >Release: FreeBSD 8.0-STABLE-201001
> >Organization:
>
> Atlantis Network
>
> >Environment:
>
> FreeBSD ALEXF.WORKGROUP 8.0-STABLE-201001 FreeBSD 8.0-STABLE-201001 #0: Sat
> Jan 16 11:44:32 YEKT 2010
>
> >Description:
>
> This bug is the place to be to motherboard nForce chipset.
>
> Copying process from usb stick or usb hdd stops at some time (10 - 50
> seconds).
>
> dmesg:
> Copyright (c) 1992-2010 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.0-STABLE-201001 #0: Sat Jan 16 11:44:32 YEKT 2010
> root@:/usr/src/sys/i386/compile/ALEX_USB i386
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc148a000.
> Preloaded elf module "/boot/kernel/linux.ko" at 0xc148a174.
> Preloaded elf module "/boot/modules/nvidia.ko" at 0xc148a220.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 2104406119 Hz
> CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ (2104.41-MHz 686-class
> CPU) Origin = "AuthenticAMD" Id = 0x60fb1 Stepping = 1
>
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M
> CA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
> Features2=0x2001<SSE3,CX16>
> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
> AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
> Data TLB: 32 entries, fully associative
> Instruction TLB: 32 entries, fully associative
> L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
> L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
> associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag,
> 8-way associative real memory = 2147483648 (2048 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
> 0x0000000001826000 - 0x000000007da9ffff, 2082971648 bytes (508538 pages)
> avail memory = 2081628160 (1985 MB)
> Table 'FACP' at 0x7fef9d80
> Table 'HPET' at 0x7fef9f80
> Table 'MCFG' at 0x7fefa000
> Table 'APIC' at 0x7fef9ec0
> APIC: Found table at 0x7fef9ec0
> MP Configuration Table version 1.4 found at 0xc00f1400
> APIC: Using the MADT enumerator.
> MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
> SMP: Added CPU 0 (AP)
> MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
> SMP: Added CPU 1 (AP)
> ACPI APIC Table: <Nvidia ASUSACPI>
> INTR: Adding local APIC 1 as a target
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s)
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> bios32: Found BIOS32 Service Directory header at 0xc00fb7d0
> bios32: Entry = 0xf2030 (c00f2030) Rev = 0 Len = 1
> pcibios: PCI BIOS entry at 0xf0000+0x2060
> pnpbios: Found PnP BIOS data at 0xc00fc330
> pnpbios: Entry = f0000:c360 Rev = 1.0
> Other BIOS signatures found:
> APIC: CPU 0 has ACPI ID 0
> APIC: CPU 1 has ACPI ID 1
> ULE: setup cpu 0
> ULE: setup cpu 1
> ACPI: RSDP 0xf75e0 00024 (v2 Nvidia)
> ACPI: XSDT 0x7fef3100 00044 (v1 Nvidia ASUSACPI 42302E31 AWRD 00000000)
> ACPI: FACP 0x7fef9d80 000F4 (v3 Nvidia ASUSACPI 42302E31 AWRD 00000000)
> ACPI: DSDT 0x7fef3280 06AC0 (v1 NVIDIA ASUSACPI 00001000 MSFT 03000000)
> ACPI: FACS 0x7fef0000 00040
> ACPI: HPET 0x7fef9f80 00038 (v1 Nvidia ASUSACPI 42302E31 AWRD 00000098)
> ACPI: MCFG 0x7fefa000 0003C (v1 Nvidia ASUSACPI 42302E31 AWRD 00000000)
> ACPI: APIC 0x7fef9ec0 0007C (v1 Nvidia ASUSACPI 42302E31 AWRD 00000000)
> MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
> ioapic0: Changing APIC ID to 2
> ioapic0: Routing external 8259A's -> intpin 0
> MADT: Interrupt override: source 0, irq 2
> ioapic0: Routing IRQ 0 -> intpin 2
> MADT: Interrupt override: source 9, irq 9
> ioapic0: intpin 9 trigger: level
> MADT: Interrupt override: source 14, irq 14
> MADT: Interrupt override: source 15, irq 15
> lapic0: Routing NMI -> LINT1
> lapic0: LINT1 trigger: edge
> lapic0: LINT1 polarity: high
> lapic1: Routing NMI -> LINT1
> lapic1: LINT1 trigger: edge
> lapic1: LINT1 polarity: high
> ioapic0 <Version 1.1> irqs 0-23 on motherboard
> cpu0 BSP:
> ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
> wlan: <802.11 Link Layer>
> null: <null device, zero device>
> random: <entropy source, Software, Yarrow>
> nfslock: pseudo-device
> io: <I/O>
> kbd: new array size 4
> kbd1 at kbdmux0
> mem: <memory>
> Pentium Pro MTRR support enabled
> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
> npx0: INT 16 interface
> acpi0: <Nvidia ASUSACPI> on motherboard
> PCIe: Memory Mapped configuration base @ 0xe0000000
> pcibios: BIOS version 3.00
> ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
> acpi0: [MPSAFE]
> acpi0: [ITHREAD]
> AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SMCA -> bus 0 dev 10 func 1
> acpi0: Power Button (fixed)
> acpi0: wakeup code va 0xc58bc000 pa 0x1000
> AcpiOsDerivePciId: \\_SB_.PCI0.IGPU.GPUR -> bus 0 dev 5 func 0
> AcpiOsDerivePciId: \\_SB_.PCI0.VT86.PIO1 -> bus 0 dev 10 func 0
> AcpiOsDerivePciId: \\_SB_.PCI0.VT86.PIRQ -> bus 0 dev 10 func 0
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 7fdf0000 (3) failed
> ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> pci_link0: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 9 10 11 14 15
> Validation 0 255 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link1: Index IRQ Rtd Ref IRQs
> Initial Probe 0 5 N 0 5 7 9 10 11 14 15
> Validation 0 5 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link2: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 9 10 11 14 15
> Validation 0 255 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link3: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 9 10 11 14 15
> Validation 0 255 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link4: Index IRQ Rtd Ref IRQs
> Initial Probe 0 11 N 0 5 7 9 10 11 14 15
> Validation 0 11 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link5: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 9 10 11 14 15
> Validation 0 255 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link6: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 9 10 11 14 15
> Validation 0 255 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link7: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 9 10 11 14 15
> Validation 0 255 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link8: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 9 10 11 14 15
> Validation 0 255 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link9: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 9 10 11 14 15
> Validation 0 255 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link10: Index IRQ Rtd Ref IRQs
> Initial Probe 0 11 N 0 5 7 9 10 11 14 15
> Validation 0 11 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link11: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 9 10 11 14 15
> Validation 0 255 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link12: Index IRQ Rtd Ref IRQs
> Initial Probe 0 10 N 0 5 7 9 10 11 14 15
> Validation 0 10 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link13: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 9 10 11 14 15
> Validation 0 255 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link14: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 9 10 11 14 15
> Validation 0 255 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link15: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 9 10 11 14 15
> Validation 0 255 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link16: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 9 10 11 14 15
> Validation 0 255 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link17: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 5 7 9 10 11 14 15
> Validation 0 255 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link18: Index IRQ Rtd Ref IRQs
> Initial Probe 0 5 N 0 5 7 9 10 11 14 15
> Validation 0 5 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link19: Index IRQ Rtd Ref IRQs
> Initial Probe 0 5 N 0 5 7 9 10 11 14 15
> Validation 0 5 N 0 5 7 9 10 11 14 15
> After Disable 0 255 N 0 5 7 9 10 11 14 15
> pci_link20: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 16
> Validation 0 255 N 0 16
> After Disable 0 255 N 0 16
> pci_link21: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 17
> Validation 0 255 N 0 17
> After Disable 0 255 N 0 17
> pci_link22: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 18
> Validation 0 255 N 0 18
> After Disable 0 255 N 0 18
> pci_link23: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 19
> Validation 0 255 N 0 19
> After Disable 0 255 N 0 19
> pci_link24: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 16
> Validation 0 255 N 0 16
> After Disable 0 255 N 0 16
> pci_link25: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 16
> Validation 0 255 N 0 16
> After Disable 0 255 N 0 16
> pci_link26: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 16
> Validation 0 255 N 0 16
> After Disable 0 255 N 0 16
> pci_link27: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 16
> Validation 0 255 N 0 16
> After Disable 0 255 N 0 16
> pci_link28: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 20 21 22 23
> Validation 0 255 N 0 20 21 22 23
> After Disable 0 255 N 0 20 21 22 23
> pci_link29: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 20 21 22 23
> Validation 0 255 N 0 20 21 22 23
> After Disable 0 255 N 0 20 21 22 23
> pci_link30: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 20 21 22 23
> Validation 0 255 N 0 20 21 22 23
> After Disable 0 255 N 0 20 21 22 23
> pci_link31: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 20 21 22 23
> Validation 0 255 N 0 20 21 22 23
> After Disable 0 255 N 0 20 21 22 23
> pci_link32: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 20 21 22 23
> Validation 0 255 N 0 20 21 22 23
> After Disable 0 255 N 0 20 21 22 23
> pci_link33: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 20 21 22 23
> Validation 0 255 N 0 20 21 22 23
> After Disable 0 255 N 0 20 21 22 23
> pci_link34: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 20 21 22 23
> Validation 0 255 N 0 20 21 22 23
> After Disable 0 255 N 0 20 21 22 23
> pci_link35: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 20 21 22 23
> Validation 0 255 N 0 20 21 22 23
> After Disable 0 255 N 0 20 21 22 23
> pci_link36: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 20 21 22 23
> Validation 0 255 N 0 20 21 22 23
> After Disable 0 255 N 0 20 21 22 23
> pci_link37: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 20 21 22 23
> Validation 0 255 N 0 20 21 22 23
> After Disable 0 255 N 0 20 21 22 23
> pci_link38: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 20 21 22 23
> Validation 0 255 N 0 20 21 22 23
> After Disable 0 255 N 0 20 21 22 23
> pci_link39: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 20 21 22 23
> Validation 0 255 N 0 20 21 22 23
> After Disable 0 255 N 0 20 21 22 23
> pci_link40: Index IRQ Rtd Ref IRQs
> Initial Probe 0 255 N 0 20 21 22 23
> Validation 0 255 N 0 20 21 22 23
> After Disable 0 255 N 0 20 21 22 23
> acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on
> acpi0 acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts:
> legacy_route Timecounter "HPET" frequency 25000000 Hz quality 900
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: domain=0, physical bus=0
> found-> vendor=0x10de, dev=0x02f0, revid=0xa2
> domain=0, bus=0, slot=0, func=0
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x10de, dev=0x02fa, revid=0xa2
> domain=0, bus=0, slot=0, func=1
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0100, statreg=0x4020, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x10de, dev=0x02fe, revid=0xa2
> domain=0, bus=0, slot=0, func=2
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x10de, dev=0x02f8, revid=0xa2
> domain=0, bus=0, slot=0, func=3
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x10de, dev=0x02f9, revid=0xa2
> domain=0, bus=0, slot=0, func=4
> class=05-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x10de, dev=0x02ff, revid=0xa2
> domain=0, bus=0, slot=0, func=5
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x10de, dev=0x027f, revid=0xa2
> domain=0, bus=0, slot=0, func=6
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0102, statreg=0x0020, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x10de, dev=0x027e, revid=0xa2
> domain=0, bus=0, slot=0, func=7
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x10de, dev=0x02fb, revid=0xa1
> domain=0, bus=0, slot=4, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
> powerspec 2 supports D0 D3 current D0
> MSI supports 2 messages, 64 bit
> found-> vendor=0x10de, dev=0x0270, revid=0xa2
> domain=0, bus=0, slot=9, func=0
> class=05-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x10de, dev=0x0260, revid=0xa3
> domain=0, bus=0, slot=10, func=0
> class=06-01-00, hdrtype=0x00, mfdev=1
> cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x10de, dev=0x0264, revid=0xa3
> domain=0, bus=0, slot=10, func=1
> class=0c-05-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=255
> powerspec 2 supports D0 D3 current D0
> map[20]: type I/O Port, range 32, base 0x4c00, size 6, enabled
> map[24]: type I/O Port, range 32, base 0x4c40, size 6, enabled
> found-> vendor=0x10de, dev=0x0272, revid=0xa3
> domain=0, bus=0, slot=10, func=2
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0400, statreg=0x00a0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x10de, dev=0x026d, revid=0xa3
> domain=0, bus=0, slot=11, func=0
> class=0c-03-10, hdrtype=0x00, mfdev=1
> cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
> intpin=a, irq=255
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type Memory, range 32, base 0xfe02f000, size 12, enabled
> unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02f000
> ohci early: SMM active, request owner change
> found-> vendor=0x10de, dev=0x026e, revid=0xa3
> domain=0, bus=0, slot=11, func=1
> class=0c-03-20, hdrtype=0x00, mfdev=1
> cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
> intpin=b, irq=255
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type Memory, range 32, base 0xfe02e000, size 8, enabled
> unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02e000
> found-> vendor=0x10de, dev=0x0265, revid=0xa1
> domain=0, bus=0, slot=13, func=0
> class=01-01-8a, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
> powerspec 2 supports D0 D3 current D0
> map[20]: type I/O Port, range 32, base 0xf400, size 4, enabled
> found-> vendor=0x10de, dev=0x0266, revid=0xa1
> domain=0, bus=0, slot=14, func=0
> class=01-01-85, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
> intpin=a, irq=5
> powerspec 2 supports D0 D3 current D0
> MSI supports 4 messages, 64 bit
> map[10]: type I/O Port, range 32, base 0x9f0, size 3, enabled
> map[14]: type I/O Port, range 32, base 0xbf0, size 2, enabled
> map[18]: type I/O Port, range 32, base 0x970, size 3, enabled
> map[1c]: type I/O Port, range 32, base 0xb70, size 2, enabled
> map[20]: type I/O Port, range 32, base 0xe000, size 4, enabled
> map[24]: type Memory, range 32, base 0xfe02d000, size 12, enabled
> pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.APSI:0)
> pci_link39: Picked IRQ 20 with weight 0
> pcib0: slot 14 INTA routed to irq 20 via \\_SB_.PCI0.APSI
> found-> vendor=0x10de, dev=0x0267, revid=0xa1
> domain=0, bus=0, slot=15, func=0
> class=01-01-85, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
> intpin=a, irq=5
> powerspec 2 supports D0 D3 current D0
> MSI supports 4 messages, 64 bit
> map[10]: type I/O Port, range 32, base 0x9e0, size 3, enabled
> map[14]: type I/O Port, range 32, base 0xbe0, size 2, enabled
> map[18]: type I/O Port, range 32, base 0x960, size 3, enabled
> map[1c]: type I/O Port, range 32, base 0xb60, size 2, enabled
> map[20]: type I/O Port, range 32, base 0xcc00, size 4, enabled
> map[24]: type Memory, range 32, base 0xfe02c000, size 12, enabled
> pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.APSJ:0)
> pci_link40: Picked IRQ 21 with weight 0
> pcib0: slot 15 INTA routed to irq 21 via \\_SB_.PCI0.APSJ
> found-> vendor=0x10de, dev=0x026f, revid=0xa2
> domain=0, bus=0, slot=16, func=0
> class=06-04-01, hdrtype=0x01, mfdev=1
> cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
> found-> vendor=0x10de, dev=0x026c, revid=0xa2
> domain=0, bus=0, slot=16, func=1
> class=04-03-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
> intpin=b, irq=10
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message, 64 bit, vector masks
> map[10]: type Memory, range 32, base 0xfe024000, size 14, enabled
> pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.AAZA:0)
> pci_link33: Picked IRQ 22 with weight 0
> pcib0: slot 16 INTB routed to irq 22 via \\_SB_.PCI0.AAZA
> found-> vendor=0x10de, dev=0x0269, revid=0xa3
> domain=0, bus=0, slot=20, func=0
> class=06-80-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled
> map[14]: type I/O Port, range 32, base 0xc800, size 3, enabled
> pcib0: matched entry for 0.20.INTA (src \\_SB_.PCI0.APCH:0)
> pci_link30: Picked IRQ 23 with weight 0
> pcib0: slot 20 INTA routed to irq 23 via \\_SB_.PCI0.APCH
> found-> vendor=0x1022, dev=0x1100, revid=0x00
> domain=0, bus=0, slot=24, func=0
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1101, revid=0x00
> domain=0, bus=0, slot=24, func=1
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1102, revid=0x00
> domain=0, bus=0, slot=24, func=2
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1103, revid=0x00
> domain=0, bus=0, slot=24, func=3
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> pci0: <memory, RAM> at device 0.0 (no driver attached)
> pci0: <memory, RAM> at device 0.1 (no driver attached)
> pci0: <memory, RAM> at device 0.2 (no driver attached)
> pci0: <memory, RAM> at device 0.3 (no driver attached)
> pci0: <memory, RAM> at device 0.4 (no driver attached)
> pci0: <memory, RAM> at device 0.5 (no driver attached)
> pci0: <memory, RAM> at device 0.6 (no driver attached)
> pci0: <memory, RAM> at device 0.7 (no driver attached)
> pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pcib1: domain 0
> pcib1: secondary bus 1
> pcib1: subordinate bus 1
> pcib1: I/O decode 0xa000-0xafff
> pcib1: memory decode 0xfa000000-0xfcffffff
> pcib1: prefetched decode 0xd0000000-0xdfffffff
> pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.XVRA -
> AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1
> pci1: domain=0, physical bus=1
> found-> vendor=0x10de, dev=0x0392, revid=0xa1
> domain=0, bus=1, slot=0, func=0
> class=03-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled
> pcib1: requested memory range 0xfa000000-0xfaffffff: good
> map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28,
> enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good
> map[1c]: type Memory, range 64, base 0xfb000000, size 24, enabled
> pcib1: requested memory range 0xfb000000-0xfbffffff: good
> map[24]: type I/O Port, range 32, base 0xac00, size 7, enabled
> pcib1: requested I/O range 0xac00-0xac7f: in range
> pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.APC5:0)
> pci_link24: Picked IRQ 16 with weight 0
> pcib0: slot 4 INTA routed to irq 16 via \\_SB_.PCI0.APC5
> pcib1: slot 0 INTA is routed to irq 16
> vgapci0: <VGA-compatible display> port 0xac00-0xac7f mem
> 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xfb000000-0xfbffffff irq 16
> at device 0.0 on pci1 nvidia0: <GeForce 7600 GS> on vgapci0
> vgapci0: child nvidia0 requested pci_enable_busmaster
> vgapci0: child nvidia0 requested pci_enable_io
> vgapci0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xfa000000
> vgapci0: Reserved 0x10000000 bytes for rid 0x14 type 3 at 0xd0000000
> vgapci0: Reserved 0x1000000 bytes for rid 0x1c type 3 at 0xfb000000
> ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49
> nvidia0: [GIANT-LOCKED]
> nvidia0: [ITHREAD]
> pci0: <memory, RAM> at device 9.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 10.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
> pci0: <memory, RAM> at device 10.2 (no driver attached)
> ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff at device
> 11.0 on pci0 pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.APCF:0)
> pci_link28: Picked IRQ 20 with weight 1
> pcib0: slot 11 INTA routed to irq 20 via \\_SB_.PCI0.APCF
> ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50
> ohci0: [MPSAFE]
> ohci0: [ITHREAD]
> usbus0: <OHCI (generic) USB controller> on ohci0
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff at
> device 11.1 on pci0 pcib0: matched entry for 0.11.INTB (src
> \\_SB_.PCI0.APCL:0)
> pci_link36: Picked IRQ 21 with weight 1
> pcib0: slot 11 INTB routed to irq 21 via \\_SB_.PCI0.APCL
> ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 51
> ehci0: [MPSAFE]
> ehci0: [ITHREAD]
> usbus1: EHCI version 1.0
> usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
> atapci0: <nVidia nForce MCP51 UDMA133 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf400
> ata0: <ATA channel 0> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
> ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
> ata0: reset tp2 stat0=50 stat1=00 devices=0x1
> ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 52
> ata0: [MPSAFE]
> ata0: [ITHREAD]
> ata1: <ATA channel 1> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> ata1: reset tp1 mask=03 ostat0=7f ostat1=50
> ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1: reset tp2 stat0=ff stat1=00 devices=0x20000
> ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 53
> ata1: [MPSAFE]
> ata1: [ITHREAD]
> atapci1: <nVidia nForce MCP51 SATA300 controller> port
> 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem
> 0xfe02d000-0xfe02dfff irq 20 at device 14.0 on pci0 atapci1: Reserved 0x10
> bytes for rid 0x20 type 4 at 0xe000
> atapci1: [MPSAFE]
> atapci1: [ITHREAD]
> atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02d000
> ata2: <ATA channel 0> on atapci1
> atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0
> atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0
> ata2: SATA connect time=0ms status=00000123
> ata2: reset tp1 mask=01 ostat0=50 ostat1=00
> ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata2: reset tp2 stat0=50 stat1=00 devices=0x1
> ata2: [MPSAFE]
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci1
> atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970
> atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70
> ata3: SATA connect time=0ms status=00000123
> ata3: reset tp1 mask=01 ostat0=50 ostat1=00
> ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata3: reset tp2 stat0=50 stat1=00 devices=0x1
> ata3: [MPSAFE]
> ata3: [ITHREAD]
> atapci2: <nVidia nForce MCP51 SATA300 controller> port
> 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem
> 0xfe02c000-0xfe02cfff irq 21 at device 15.0 on pci0 atapci2: Reserved 0x10
> bytes for rid 0x20 type 4 at 0xcc00
> atapci2: [MPSAFE]
> atapci2: [ITHREAD]
> atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02c000
> ata4: <ATA channel 0> on atapci2
> atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0
> atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0
> ata4: SATA connect timeout status=00000000
> ata4: [MPSAFE]
> ata4: [ITHREAD]
> ata5: <ATA channel 1> on atapci2
> atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960
> atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60
> ata5: SATA connect timeout status=00000000
> ata5: [MPSAFE]
> ata5: [ITHREAD]
> pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0
> pcib2: domain 0
> pcib2: secondary bus 2
> pcib2: subordinate bus 2
> pcib2: I/O decode 0xb000-0xbfff
> pcib2: memory decode 0xfde00000-0xfdefffff
> pcib2: prefetched decode 0xfdd00000-0xfddfffff
> pcib2: Subtractively decoded bridge.
> pci2: <ACPI PCI bus> on pcib2
> pci2: domain=0, physical bus=2
> found-> vendor=0x10ec, dev=0x8139, revid=0x10
> domain=0, bus=2, slot=9, func=0
> class=02-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
> lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
> intpin=a, irq=5
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type I/O Port, range 32, base 0xbc00, size 8, enabled
> pcib2: requested I/O range 0xbc00-0xbcff: in range
> map[14]: type Memory, range 32, base 0xfdeff000, size 8, enabled
> pcib2: requested memory range 0xfdeff000-0xfdeff0ff: good
> pcib2: matched entry for 2.9.INTA (src \\_SB_.PCI0.APC2:0)
> pci_link21: Picked IRQ 17 with weight 0
> pcib2: slot 9 INTA routed to irq 17 via \\_SB_.PCI0.APC2
> rl0: <RealTek 8139 10/100BaseTX> port 0xbc00-0xbcff mem
> 0xfdeff000-0xfdeff0ff irq 17 at device 9.0 on pci2 rl0: Reserved 0x100
> bytes for rid 0x10 type 4 at 0xbc00
> miibus0: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> PHY 0 on miibus0
> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> rl0: bpf attached
> rl0: Ethernet address: 00:c0:df:13:4a:77
> ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 54
> rl0: [MPSAFE]
> rl0: [ITHREAD]
> pci0: <multimedia, HDA> at device 16.1 (no driver attached)
> nfe0: <NVIDIA nForce 430 MCP13 Networking Adapter> port 0xc800-0xc807 mem
> 0xfe02b000-0xfe02bfff irq 23 at device 20.0 on pci0 nfe0: Reserved 0x1000
> bytes for rid 0x10 type 3 at 0xfe02b000
> miibus1: <MII bus> on nfe0
> e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus1
> e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto nfe0: bpf attached
> nfe0: Ethernet address: 00:1a:92:7c:06:8d
> ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 55
> nfe0: [MPSAFE]
> nfe0: [FILTER]
> acpi_tz0: <Thermal Zone> on acpi0
> atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
> atrtc0: registered as a time-of-day clock (resolution 1000000us)
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 56
> uart0: [FILTER]
> uart0: fast interrupt
> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 57
> uart1: [FILTER]
> uart1: fast interrupt
> ppc0: using extended I/O port range
> ppc0: SPP EPP
> ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 58
> ppc0: [MPSAFE]
> ppc0: [ITHREAD]
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> plip0: bpf attached
> plip0: [MPSAFE]
> plip0: [ITHREAD]
> lpt0: <Printer> on ppbus0
> lpt0: [MPSAFE]
> lpt0: [ITHREAD]
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 59
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> psm0: current command byte:0047
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 60
> psm0: [GIANT-LOCKED]
> psm0: [ITHREAD]
> psm0: model IntelliMouse, device ID 3-00, 3 buttons
> psm0: config:00000000, flags:00000008, packet size:4
> psm0: syncmask:08, syncbits:00
> cpu0: <ACPI CPU> on acpi0
> cpu0: switching to generic Cx mode
> powernow0: <PowerNow! K8> on cpu0
> powernow0: STATUS: 0x310a120c0a0d020d
> powernow0: STATUS: maxfid: 0x0d
> powernow0: STATUS: maxvid: 0x0a
> device_attach: powernow0 attach returned 6
> cpu1: <ACPI CPU> on acpi0
> powernow1: <PowerNow! K8> on cpu1
> powernow1: STATUS: 0x310a120c0a0d020d
> powernow1: STATUS: maxfid: 0x0d
> powernow1: STATUS: maxvid: 0x0a
> device_attach: powernow1 attach returned 6
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> ahc_isa_probe 0: ioport 0xc00 alloc failed
> ahc_isa_probe 4: ioport 0x4c00 alloc failed
> ahc_isa_probe 10: ioport 0xac00 alloc failed
> ahc_isa_probe 11: ioport 0xbc00 alloc failed
> ahc_isa_probe 12: ioport 0xcc00 alloc failed
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> ex_isa_identify()
> isa_probe_children: disabling PnP devices
> pmtimer0 on isa0
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> atkbdc: atkbdc0 already exists; skipping it
> atrtc: atrtc0 already exists; skipping it
> ppc: ppc0 already exists; skipping it
> sc: sc0 already exists; skipping it
> uart: uart0 already exists; skipping it
> uart: uart1 already exists; skipping it
> isa_probe_children: probing non-PnP devices
> orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> isa_probe_children: probing PnP devices
> Device configuration finished.
> Reducing kern.maxvnodes 133529 -> 100000
> procfs registered
> lapic: Divisor 2, Frequency 100209823 hz
> Timecounter "TSC" frequency 2104406119 Hz quality -100
> Timecounters tick every 1.000 msec
> Linux ELF exec handler installed
> lo0: bpf attached
> hptrr: no controller detected.
> ata0: Identifying devices: 00000001
> ata0: New devices: 00000001
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 480Mbps High Speed USB v2.0
> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
> ad0: setting UDMA100
> ad0: 114473MB <Seagate ST3120026A 3.06> at ata0-master UDMA100
> ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue
> GEOM: new disk ad0
> ugen0.1: <nVidia> at usbus0
> uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <nVidia> at usbus1
> uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
> ad0: nVidia check1 failed
> ad0: Adaptec check1 failed
> ad0: LSI (v3) check1 failed
> ad0: LSI (v2) check1 failed
> ad0: FreeBSD check1 failed
> ata1: Identifying devices: 00020000
> ata1: New devices: 00020000
> ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
> acd0: setting UDMA66
> acd0: <PLEXTOR DVDR PX-755A/1.07> DVDR drive at ata1 as slave
> acd0: read 6890KB/s (6890KB/s) write 8268KB/s (8268KB/s), 2048KB buffer,
> UDMA66 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
> acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> ata2: Identifying devices: 00000001
> ata2: New devices: 00000001
> ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
> ad4: setting UDMA100
> ad4: 76319MB <SAMSUNG HD082GJ JE100-19> at ata2-master UDMA100 SATA 3Gb/s
> ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
> ad4: nVidia check1 failed
> ad4: Adaptec check1 failed
> ad4: LSI (v3) check1 failed
> ad4: LSI (v2) check1 failed
> ad4: FreeBSD check1 failed
> ata3: Identifying devices: 00000001
> ata3: New devices: 00000001
> ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
> ad6: setting UDMA100
> ad6: 715404MB <Seagate ST3750330AS SD15> at ata3-master UDMA100 SATA 3Gb/s
> ad6: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth
> queue ad6: nVidia check1 failed
> ad6: Adaptec check1 failed
> ad6: LSI (v3) check1 failed
> ad6: LSI (v2) check1 failed
> ad6: FreeBSD check1 failed
> ata4: Identifying devices: 00000000
> ata4: New devices: 00000000
> ata5: Identifying devices: 00000000
> ata5: New devices: 00000000
> ATA PseudoRAID loaded
> SMP: AP CPU #1 Launched!
> cpu1 AP:
> ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
> ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 1 vector 48
> ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 1 vector 49
> ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 50
> ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 1 vector 51
> ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 52
> ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 53
> GEOM: new disk ad4
> GEOM: new disk ad6
> uhub0: 8 ports with 8 removable, self powered
> uhub1: 8 ports with 8 removable, self powered
> ugen1.2: <Seagate> at usbus1
> umass0: <Seagate FreeAgent, class 0/0, rev 2.00/1.32, addr 2> on usbus1
> umass0: SCSI over Bulk-Only; quirks = 0x0000
> umass0:0:0:-1: Attached to scbus0
> GEOM: new disk da0
> pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0
> pass0: <Seagate FreeAgent 0132> Fixed Direct Access SCSI-4 device
> pass0: Serial Number 2GEWDLZ4
> pass0: 40.000MB/s transfers
> da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
> da0: <Seagate FreeAgent 0132> Fixed Direct Access SCSI-4 device
> da0: Serial Number 2GEWDLZ4
> da0: 40.000MB/s transfers
> da0: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
> Trying to mount root from ufs:/dev/da0s1a
> ct_to_ts([2010-01-27 20:41:07]) = 1264624867.000000000
> start_init: trying /sbin/init
> linprocfs registered
> splash: image decoder found: daemon_saver
> rl0: link state changed to UP
> ugen1.3: <JetFlash> at usbus1
> umass1: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.41, addr 3> on
> usbus1 umass1: SCSI over Bulk-Only; quirks = 0x0100
> umass1:1:1:-1: Attached to scbus1
> (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim1:1:0:0): SCSI Status: Check Condition
> (probe0:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0
> (probe0:umass-sim1:1:0:0): Not ready to ready change, medium may have
> changed (probe0:umass-sim1:1:0:0): (probe0:umass-sim1:1:0:0): TEST UNIT
> READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0
> (probe0:umass-sim1:1:0:0): Not ready to ready change, medium may have
> changed Retrying Command (per Sense Data)
> (probe0:umass-sim1:1:0:0): Retrying Command
> GEOM: new disk da1
> pass1 at umass-sim1 bus 1 scbus1 target 0 lun 0
> pass1: <JetFlash TS2GJFV10 8.07> Removable Direct Access SCSI-2 device
> pass1: Serial Number 00000000
> pass1: 40.000MB/s transfers
> da1 at umass-sim1 bus 1 scbus1 target 0 lun 0
> da1: <JetFlash TS2GJFV10 8.07> Removable Direct Access SCSI-2 device
> da1: Serial Number 00000000
> da1: 40.000MB/s transfers
> da1: 1960MB (4014080 512 byte sectors: 255H 63S/T 249C)
> (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
> (da0:umass-sim0:0:0:0): Retrying Command
> (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
> (da0:umass-sim0:0:0:0): Retrying Command
> (da0:umass-sim0:0:0:0): Retrying Command
> (da1:umass-sim1:1:0:0): Request completed with CAM_REQ_CMP_ERR
> (da1:umass-sim1:1:0:0): Retrying Command
> (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
> (da0:umass-sim0:0:0:0): Retrying Command
> (da0:umass-sim0:0:0:0): Retrying Command
> (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
> (da0:umass-sim0:0:0:0): Retrying Command
> (da0:umass-sim0:0:0:0): Retrying Command
> (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
> (da0:umass-sim0:0:0:0): Retrying Command
> (da0:umass-sim0:0:0:0): Retrying Command
> (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
> (da0:umass-sim0:0:0:0): Retrying Command
> (da0:umass-sim0:0:0:0): Retrying Command
> (da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
> (da0:umass-sim0:0:0:0): Retrying Command
> (da0:umass-sim0:0:0:0): Retrying Command
>
> pciconf -lv
>
> none0 at pci0:0:0:0: class=0x050000 card=0x81c01043 chip=0x02f010de rev=0xa2
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'C51 Host Bridge'
> class = memory
> subclass = RAM
> none1 at pci0:0:0:1: class=0x050000 card=0x81c01043 chip=0x02fa10de rev=0xa2
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'C51 Memory Controller 0'
> class = memory
> subclass = RAM
> none2 at pci0:0:0:2: class=0x050000 card=0x81c01043 chip=0x02fe10de rev=0xa2
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'C51 Memory Controller 1'
> class = memory
> subclass = RAM
> none3 at pci0:0:0:3: class=0x050000 card=0x81c01043 chip=0x02f810de rev=0xa2
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'C51 Memory Controller 5'
> class = memory
> subclass = RAM
> none4 at pci0:0:0:4: class=0x050000 card=0x81c01043 chip=0x02f910de rev=0xa2
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'C51 Memory Controller 4'
> class = memory
> subclass = RAM
> none5 at pci0:0:0:5: class=0x050000 card=0x81c01043 chip=0x02ff10de rev=0xa2
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'C51 Host Bridge'
> class = memory
> subclass = RAM
> none6 at pci0:0:0:6: class=0x050000 card=0x81c01043 chip=0x027f10de rev=0xa2
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'C51 Memory Controller 3'
> class = memory
> subclass = RAM
> none7 at pci0:0:0:7: class=0x050000 card=0x81c01043 chip=0x027e10de rev=0xa2
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'C51 Memory Controller 2'
> class = memory
> subclass = RAM
> pcib1 at pci0:0:4:0: class=0x060400 card=0x000010de chip=0x02fb10de rev=0xa1
> hdr=0x01 vendor = 'Nvidia Corp'
> device = 'C51 PCIe Bridge'
> class = bridge
> subclass = PCI-PCI
> none8 at pci0:0:9:0: class=0x050000 card=0x81c01043 chip=0x027010de rev=0xa2
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'MCP51 Host Bridge'
> class = memory
> subclass = RAM
> isab0 at pci0:0:10:0: class=0x060100 card=0x81c01043 chip=0x026010de rev=0xa3
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'MCP51 LPC Bridge'
> class = bridge
> subclass = PCI-ISA
> none9 at pci0:0:10:1: class=0x0c0500 card=0x81c01043 chip=0x026410de rev=0xa3
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'NVIDIA nForce PCI System Management (NVIDIA SMB Bus
> Controller)' class = serial bus
> subclass = SMBus
> none10 at pci0:0:10:2: class=0x050000 card=0x81c01043 chip=0x027210de rev=0xa3
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'MCP51 Memory Controller 0'
> class = memory
> subclass = RAM
> ohci0 at pci0:0:11:0: class=0x0c0310 card=0x81c01043 chip=0x026d10de rev=0xa3
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'MCP51 USB Controller'
> class = serial bus
> subclass = USB
> ehci0 at pci0:0:11:1: class=0x0c0320 card=0x81c01043 chip=0x026e10de rev=0xa3
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'MCP51 USB Controller'
> class = serial bus
> subclass = USB
> atapci0 at pci0:0:13:0: class=0x01018a card=0x81c01043 chip=0x026510de
> rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp'
> device = 'MCP51 Parallel ATA Controller'
> class = mass storage
> subclass = ATA
> atapci1 at pci0:0:14:0: class=0x010185 card=0x81c01043 chip=0x026610de
> rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp'
> device = 'NVIDIA nForce 430/410 Serial ATA Controller (MCP51S)'
> class = mass storage
> subclass = ATA
> atapci2 at pci0:0:15:0: class=0x010185 card=0x81c01043 chip=0x026710de
> rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp'
> device = 'NVIDIA nForce 430/410 Serial ATA Controller (MCP51S)'
> class = mass storage
> subclass = ATA
> pcib2 at pci0:0:16:0: class=0x060401 card=0x00000000 chip=0x026f10de rev=0xa2
> hdr=0x01 vendor = 'Nvidia Corp'
> device = 'MCP51 PCI Bridge'
> class = bridge
> subclass = PCI-PCI
> none11 at pci0:0:16:1: class=0x040300 card=0x81cb1043 chip=0x026c10de rev=0xa2
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'MCP51 High Definition Audio'
> class = multimedia
> subclass = HDA
> nfe0 at pci0:0:20:0: class=0x068000 card=0x816a1043 chip=0x026910de rev=0xa3
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'MCP51 Ethernet Controller (2A34103C)'
> class = bridge
> hostb0 at pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00
> hdr=0x00 vendor = 'Advanced Micro Devices (AMD)'
> device = 'Athlon64/Opteron/Sempron (K8 Family) HyperTransport
> Technology Configuration' class = bridge
> subclass = HOST-PCI
> hostb1 at pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00
> hdr=0x00 vendor = 'Advanced Micro Devices (AMD)'
> device = 'Athlon64/Opteron/Sempron (K8 Family) Address Map'
> class = bridge
> subclass = HOST-PCI
> hostb2 at pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00
> hdr=0x00 vendor = 'Advanced Micro Devices (AMD)'
> device = 'Athlon64/Opteron/Sempron (K8 Family) DRAM Controller'
> class = bridge
> subclass = HOST-PCI
> hostb3 at pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00
> hdr=0x00 vendor = 'Advanced Micro Devices (AMD)'
> device = 'Athlon64/Opteron/Sempron (K8 Family) Miscellaneous
> Control' class = bridge
> subclass = HOST-PCI
> vgapci0 at pci0:1:0:0: class=0x030000 card=0x341a1458 chip=0x039210de rev=0xa1
> hdr=0x00 vendor = 'Nvidia Corp'
> device = 'NVIDIA GeForce 7600 GS (NVIDIA GeForce 7600 GS)'
> class = display
> subclass = VGA
> rl0 at pci0:2:9:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10
> hdr=0x00 vendor = 'Realtek Semiconductor'
> device = 'Realtek RTL8139 Family PCI Fast Ethernet NIC
> (RTL-8139/8139C/8139C)' class = network
> subclass = ethernet
>
> >How-To-Repeat:
>
> Install FreeBSD 8.0-RELEASE or 8.0-STABLE-201001 to motherboard nForce
> chipset. Let GA-M56S-S3 or or any nForce430,560,630... Install mc. Mount
> usb stick and copy group files about 600Mb. Copying process but freeze.
>
> >Fix:
>
> Problem fix: turn off usb 2.0 in BIOS or hw.usb.ehci.no_hs=1. USB1.0 work
> slow, problem not found. :( FreeBSD 7.2 worked normal, not problem.
Hi,
Your USB 2.0 controller most likely has the lost interrupt bug. Try adding
your USB 2.0 controller to the list of devices quirked in:
src/sys/dev/usb/controller/ehci_pci.c:
/* Dropped interrupts workaround */
switch (pci_get_vendor(self)) {
case PCI_EHCI_VENDORID_ATI:
case PCI_EHCI_VENDORID_VIA:
sc->sc_flags |= EHCI_SCFLG_LOSTINTRBUG;
if (bootverbose)
device_printf(self,
"Dropped interrupts workaround enabled\n");
break;
default:
break;
}
--HPS
More information about the freebsd-usb
mailing list