usb/142387: Netgear WPN111 not recognised by uath(4) after uathload

[Andrew]

The following reply was made to PR usb/142387; it has been noted by GNATS.

From: Andrew <andrew at flarn.com>
To: Hans Petter Selasky <hselasky at c2i.net>
Cc: freebsd-usb at freebsd.org, freebsd-gnats-submit at freebsd.org
Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after 
	uathload
Date: Thu, 7 Jan 2010 09:32:06 +0000

 2010/1/6 Hans Petter Selasky <hselasky at c2i.net>:
 > On Wednesday 06 January 2010 21:26:03 Andrew wrote:
 >> >Number: =A0 =A0 =A0 =A0 142387
 >> >Category: =A0 =A0 =A0 usb
 >> >Synopsis: =A0 =A0 =A0 Netgear WPN111 not recognised by uath(4) after ua=
 thload
 >> >Confidential: =A0 no
 >> >Severity: =A0 =A0 =A0 non-critical
 >> >Priority: =A0 =A0 =A0 low
 >> >Responsible: =A0 =A0freebsd-usb
 >> >State: =A0 =A0 =A0 =A0 =A0open
 >> >Quarter:
 >> >Keywords:
 >> >Date-Required:
 >> >Class: =A0 =A0 =A0 =A0 =A0sw-bug
 >> >Submitter-Id: =A0 current-users
 >> >Arrival-Date: =A0 Wed Jan 06 20:30:06 UTC 2010
 >> >Closed-Date:
 >> >Last-Modified:
 >> >Originator: =A0 =A0 Andrew
 >> >Release: =A0 =A0 =A0 =A08-STABLE
 >> >Organization:
 >> >Environment:
 >>
 >> FreeBSD XXXXXX 8.0-STABLE FreeBSD 8.0-STABLE #2: Tue Jan =A05 21:34:37 G=
 MT
 >> =A02010 =A0 =A0 root at XXXXXX:/usr/obj/usr/src/sys/GENERIC =A0amd64
 >>
 >> >Description:
 >>
 >> After running uathload the device changes from:
 >> ugen3.2: <WPN111 Atheros Communications Inc> at usbus3, cfg=3D0 md=3DHOS=
 T
 >> =A0spd=3DHIGH (480Mbps) pwr=3DON
 >>
 >> =A0 bLength =3D 0x0012
 >> =A0 bDescriptorType =3D 0x0001
 >> =A0 bcdUSB =3D 0x0200
 >> =A0 bDeviceClass =3D 0x00ff
 >> =A0 bDeviceSubClass =3D 0x0000
 >> =A0 bDeviceProtocol =3D 0x0000
 >> =A0 bMaxPacketSize0 =3D 0x0040
 >> =A0 idVendor =3D 0x1385
 >> =A0 idProduct =3D 0x5f01
 >> =A0 bcdDevice =3D 0x0001
 >> =A0 iManufacturer =3D 0x0001 =A0<Atheros Communications Inc>
 >> =A0 iProduct =3D 0x0002 =A0<WPN111>
 >> =A0 iSerialNumber =3D 0x0003 =A0<1.0>
 >> =A0 bNumConfigurations =3D 0x0001
 >> to:
 >> ugen3.2: <WPN111 Atheros Communications Inc> at usbus3, cfg=3D0 md=3DHOS=
 T
 >> =A0spd=3DHIGH (480Mbps) pwr=3DON
 >>
 >> =A0 bLength =3D 0x0012
 >> =A0 bDescriptorType =3D 0x0001
 >> =A0 bcdUSB =3D 0x0200
 >> =A0 bDeviceClass =3D 0x00ff
 >> =A0 bDeviceSubClass =3D 0x0000
 >> =A0 bDeviceProtocol =3D 0x0000
 >> =A0 bMaxPacketSize0 =3D 0x0040
 >> =A0 idVendor =3D 0x1385
 >> =A0 idProduct =3D 0x5f02
 >> =A0 bcdDevice =3D 0x0001
 >> =A0 iManufacturer =3D 0x0001 =A0<Atheros Communications Inc>
 >> =A0 iProduct =3D 0x0002 =A0<WPN111>
 >> =A0 iSerialNumber =3D 0x0003 =A0<1.0>
 >> =A0 bNumConfigurations =3D 0x0001
 >>
 >> Note: idProduct 0x5f01 -> 0x5f02 rather than 0x5f00
 >>
 >> >How-To-Repeat:
 >>
 >> Connect a Netgear WPN111, run uathload -d /dev/ugenX.X
 >>
 >> >Fix:
 >>
 >> Correct sys/dev/usb/usbdevs product id for WPN111 with firmware, patch
 >> =A0attached.
 >>
 >> uath now attachs:
 >>
 >> dmesg:
 >> ugen3.2: <Atheros Communications Inc> at usbus3 (disconnected)
 >> ugen3.2: <Atheros Communications Inc> at usbus3
 >> uath0: <Atheros Communications Inc WPN111, rev 2.00/0.01, addr 2> on usb=
 us3
 >>
 >>
 >> ifconfig uath0
 >> uath0: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
 >> =A0 =A0 =A0 =A0 ether 00:14:6c:ea:81:a4
 >> =A0 =A0 =A0 =A0 media: IEEE 802.11 Wireless Ethernet autoselect (autosel=
 ect)
 >> =A0 =A0 =A0 =A0 status: no carrier
 >>
 >>
 >> Patch attached with submission follows:
 >>
 >> --- usbdevs.orig =A0 =A0 =A02010-01-06 20:15:02.000000000 +0000
 >> +++ usbdevs =A0 2010-01-05 21:28:03.000000000 +0000
 >> @@ -2005,8 +2005,8 @@
 >> =A0product NETGEAR2 MA101B =A0 =A0 =A0 =A0 =A0 =A0 =A00x4102 =A0MA101 Re=
 v B
 >> =A0product NETGEAR3 WG111T =A0 =A0 =A0 =A0 =A0 =A0 =A00x4250 =A0WG111T
 >> =A0product NETGEAR3 WG111T_NF =A0 0x4251 =A0WG111T (no firmware)
 >> -product NETGEAR3 WPN111 =A0 =A0 =A0 =A0 =A0 =A0 =A00x5f00 =A0WPN111
 >> =A0product NETGEAR3 WPN111_NF =A0 0x5f01 =A0WPN111 (no firmware)
 >> +product NETGEAR3 WPN111 =A0 =A0 =A0 =A0 =A0 =A0 =A00x5f02 =A0WPN111
 >>
 >> =A0/* Nikon products */
 >> =A0product NIKON E990 =A0 =A0 =A0 =A0 =A0 0x0102 =A0Digital Camera E990
 >>
 >> >Release-Note:
 >> >Audit-Trail:
 >> >Unformatted:
 >
 > Hi,
 >
 > Are you certain that product "0x5f00" is incorrect and that we shouldn't =
 add
 > the new product, 0x5f02 instead?
 
 I can't be certain no, it was an assumption on my part that the WPN111
 id was incorrect as the WPN111_NF was correct for the device. Adding a
 second id for WPN111 will  be enough for my hardware to work.
 
 Thanks,
 Andrew