GSM modem Siemens ES75 is not working in 8.1
Miroslav Lachman
000.fbsd at quip.cz
Sun Dec 19 14:18:34 UTC 2010
Hi,
I have GSM modem Siemens ES75 connected by USB cable to machine running
FreeBSD 8.1-RELEASE amd64 GENERIC. As I found on the web, this modem was
working on an older releases. But mine is not properly recognized:
Unknown USB device: vendor 0x0681 product 0x0034 bus uhub1
I want to use this modem with SMS Server Tools.
Device details:
# usbconfig
ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen4.1: <EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
ugen4.2: <USB Flash Drive G & T> at usbus4, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
ugen0.2: <USB Keyboard vendor 0x04d9> at usbus0, cfg=0 md=HOST spd=LOW
(1.5Mbps) pwr=ON
ugen4.3: <USB2.0-CRW Generic> at usbus4, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
ugen1.2: <MC75 Siemens AG Wireless Modules> at usbus1, cfg=0 md=HOST
spd=FULL (12Mbps) pwr=ON
# usbconfig -d ugen1.2 dump_device_desc
ugen1.2: <MC75 Siemens AG Wireless Modules> at usbus1, cfg=0 md=HOST
spd=FULL (12Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0110
bDeviceClass = 0x0002
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0008
idVendor = 0x0681
idProduct = 0x0034
bcdDevice = 0x0000
iManufacturer = 0x0001 <Siemens AG Wireless Modules>
iProduct = 0x0002 <MC75>
iSerialNumber = 0x0000 <no string>
bNumConfigurations = 0x0001
# usbconfig -d ugen1.2 reset
usbconfig: could not reset device: Device not configured
# tail -f /var/log/messages
Dec 19 13:58:56 dca-ntbox kernel: usbd_req_re_enumerate: getting device
descriptor at addr 2 failed, USB_ERR_TIMEOUT
Dec 19 13:58:58 dca-ntbox kernel: usbd_req_re_enumerate: addr=2, set
address failed! (USB_ERR_STALLED, ignored)
Dec 19 13:58:58 dca-ntbox kernel: usbd_req_re_enumerate: getting device
descriptor at addr 2 failed, USB_ERR_STALLED
Dec 19 13:59:03 dca-ntbox kernel: ugen1.2: <Siemens AG Wireless Modules>
at usbus1 (disconnected)
Dec 19 13:59:06 dca-ntbox root: Unknown USB device: vendor 0x0681
product 0x0034 bus uhub1
Dec 19 13:59:06 dca-ntbox kernel: ugen1.2: <Siemens AG Wireless Modules>
at usbus1
There is no /dev/cuau device entry
# ll /dev | egrep 'cua|tty'
crw-rw-rw- 1 root wheel 0, 11 Dec 19 12:01 ctty
crw------- 1 root wheel 0, 38 Dec 19 12:01 ttyv0
crw------- 1 root wheel 0, 39 Dec 19 12:01 ttyv1
crw------- 1 root wheel 0, 40 Dec 19 12:01 ttyv2
crw------- 1 root wheel 0, 41 Dec 19 12:01 ttyv3
crw------- 1 root wheel 0, 42 Dec 19 12:01 ttyv4
crw------- 1 root wheel 0, 43 Dec 19 12:01 ttyv5
crw------- 1 root wheel 0, 44 Dec 19 12:01 ttyv6
crw------- 1 root wheel 0, 45 Dec 19 12:01 ttyv7
crw------- 1 root wheel 0, 46 Dec 19 12:01 ttyv8
crw------- 1 root wheel 0, 47 Dec 19 12:01 ttyv9
crw------- 1 root wheel 0, 48 Dec 19 12:01 ttyva
crw------- 1 root wheel 0, 49 Dec 19 12:01 ttyvb
crw------- 1 root wheel 0, 50 Dec 19 12:01 ttyvc
crw------- 1 root wheel 0, 51 Dec 19 12:01 ttyvd
crw------- 1 root wheel 0, 52 Dec 19 12:01 ttyve
crw------- 1 root wheel 0, 53 Dec 19 12:01 ttyvf
Can somebody tell me if it is HW problem or if I need to do some tweaks
/ add USB quirks?
Thanks in advance
Miroslav Lachman
More information about the freebsd-usb
mailing list