static usb device configuration

[Hans Petter Selasky]

On Monday 13 December 2010 08:58:15 Emanuel Haupt wrote:
> Hans Petter Selasky <hselasky at c2i.net> wrote:
> > On Sunday 12 December 2010 19:49:24 Emanuel Haupt wrote:
> > > Is there any way I can make sure that the following device:
> > > 
> > > ugen1.3: <product 0x6001 vendor 0x0403> at usbus1, cfg=0 md=HOST
> > > spd=FULL (12Mbps) pwr=ON
> > > 
> > >   bLength = 0x0012
> > >   bDescriptorType = 0x0001
> > >   bcdUSB = 0x0200
> > >   bDeviceClass = 0x0000
> > >   bDeviceSubClass = 0x0000
> > >   bDeviceProtocol = 0x0000
> > >   bMaxPacketSize0 = 0x0008
> > >   idVendor = 0x0403
> > >   idProduct = 0x6001
> > >   bcdDevice = 0x0400
> > >   iManufacturer = 0x0000  <no string>
> > >   iProduct = 0x0000  <no string>
> > >   iSerialNumber = 0x0003  <Reader 195>
> > >   bNumConfigurations = 0x0001
> > > 
> > > Is always registered as:
> > > 
> > > /dev/usb/1.3.0
> > 
> > No, this is currently not possible unless you find the USB port which
> > is enumerated first (I.E. has the lowest second number.)
> 
> When you say 'currently', is there something like that planed?

No.

--HPS