ZTE USB 3g stick

[Hans Petter Selasky]

On Saturday 28 August 2010 07:10:38 Matthew Luckie wrote:
> Hi
> 
> I've got a 3g usb stick that works fine with 8.0-STABLE from Jan 3rd
> 2010, but does not with 8.1-RELEASE.  Its a Vodafone branded stick
> bought in New Zealand.
> 
> With FreeBSD 8.0 it prints this when I insert the stick:
> 
> usb_test_autoinstall: Eject CD command status: USB_ERR_PENDING_REQUESTS
> ugen6.2: <ZTE,Incorporated> at usbus6
> ugen6.2: <ZTE,Incorporated> at usbus6 (disconnected)
> ugen6.2: <ZTE,Incorporated> at usbus6
> u3g0: <ZTE,Incorporated ZTE CDMA Technologies MSM, class 0/0, rev
> 2.00/0.00, addr 2> on usbus6
> u3g0: Found 5 ports.
> umass0: <ZTE,Incorporated ZTE CDMA Technologies MSM, class 0/0, rev
> 2.00/0.00, addr 2> on usbus6
> umass0:  SCSI over Bulk-Only; quirks = 0x0000
> umass0:2:0:-1: Attached to scbus2
> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (probe0:umass-sim0:0:0:0): Medium not present
> (probe0:umass-sim0:0:0:0): Unretryable error
> da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
> da0: <ZTE MMC Storage 2.31> Removable Direct Access SCSI-2 device
> da0: 40.000MB/s transfers
> da0: Attempt to query device size failed: NOT READY, Medium not present
> 
> [mjl at mylar mjl]$ sudo usbconfig -u 6 dump_info
> ugen6.1: <EHCI root HUB Intel> at usbus6, cfg=0 md=HOST spd=HIGH
> (480Mbps) pwr=ON
> 
> ugen6.2: <ZTE CDMA Technologies MSM ZTE,Incorporated> at usbus6, cfg=0
> md=HOST spd=HIGH (480Mbps) pwr=ON
> 
> On FreeBSD 8.1 it prints this:
> 
> ugen6.2: <ZTE,Incorporated> at usbus6
> 
> (and nothing else)
> 
> [mjl at mylar mjl]$ sudo usbconfig -d 6.2 dump_device_desc
> ugen6.2: <ZTE CDMA Technologies MSM ZTE,Incorporated> at usbus6, cfg=255
> md=HOST spd=HIGH (480Mbps) pwr=ON
> 
>    bLength = 0x0012
>    bDescriptorType = 0x0001
>    bcdUSB = 0x0200
>    bDeviceClass = 0x0000
>    bDeviceSubClass = 0x0000
>    bDeviceProtocol = 0x0000
>    bMaxPacketSize0 = 0x0040
>    idVendor = 0x19d2
>    idProduct = 0x2000
>    bcdDevice = 0x0000
>    iManufacturer = 0x0002  <ZTE,Incorporated>
>    iProduct = 0x0001  <ZTE CDMA Technologies MSM>
>    iSerialNumber = 0x0003  <P673A2VDF_MS>
>    bNumConfigurations = 0x0001

Have you loaded the u3g driver before plugging the device. Also try:

usbconfig -d 6.2 set_config 0

--HPS