sb600/sb700 ohci experimental patch

[Andrius Morkūnas]

On Thu, 24 Sep 2009 09:38:36 +0300, Andriy Gapon <avg at icyb.net.ua> wrote:
> BTW, how many ports do you have at the back?
> If more than 2, could you please try connecting the mouse to a port that is not
> connected to uhub0 (this could be verified with usbconfig)?
> And then see if you still get a mouse attachment problem during boot?
> (No other devices during boot please :-) to simplify the testcase.)

If I have USB Legacy disabled, mouse works in any port (with or without your
patch). When USB Legacy is enabled, without your patch mouse only works if I
unplug and plug it into a different port after boot. With your patch it works
in any port and doesn't care about USB legacy stuff.

On Thu, 24 Sep 2009 09:22:28 +0300, Dorian Büttner <dorian.buettner at gmx.de> wrote:
> Also, it appears that you are using 1MB capable usb flash on front, 40MB/s at
> the rear port? That brings me to the idea, do you have legacy usb enabled in
> bios or not? Cause, when I disable, I get other head power values than with
> legacy enabled.

I forgot to mention that my tests were done with USB legacy disabled. Now I
looked at the values with it enabled, but unlike in your case, the values are
the same in both cases.

-- 
Andrius