huawei card

[Hug Me]

Well, I'm one step closer. I changed the line in /sys/dev/usb/usbdevs from this:

 product HUAWEI MOBILE            0x1001  Huawei Mobile

to this:

product HUAWEI MOBILE              0x1414  Huawei Technology

recompiled and the devices now show up... however, there are 4 of them:

hugme at dragoncon# ls /dev/cuaU*
/dev/cuaU0.0            /dev/cuaU0.1            /dev/cuaU0.2
 /dev/cuaU0.3
/dev/cuaU0.0.init       /dev/cuaU0.1.init       /dev/cuaU0.2.init
 /dev/cuaU0.3.init
/dev/cuaU0.0.lock       /dev/cuaU0.1.lock       /dev/cuaU0.2.lock
 /dev/cuaU0.3.lock

is this a default? I haven't been able to get them to initilize yet...
tried minicom this morning, I'm going to configure remote to try tip
in just a bit....


On Tue, Sep 1, 2009 at 9:46 PM, Hug Me<hugme at hugme.org> wrote:
> I've been having all sorts of trouble with this card. I've tried it
> several ways. umass in the kernel, umass loaded manually, umass not
> loaded at all... u3g in loaded manually or in the kernel, ubsa loaded
> manually or in the kernel. I can't seem to get it detected as anything
> except a storage device. I've tried the camcontrol eject and when it
> comes back I still don't see the device....
>
> here is some of what I see:
>
> significant lines from boot with device in place
> ...
> umass0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00,
> addr 2> on uhub0
> umass1: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00,
> addr 2> on uhub0
> ...
> (probe2:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe2:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe2:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe2:umass-sim0:0:0:0): NOT READY asc:3a,0
> (probe2:umass-sim0:0:0:0): Medium not present
> (probe2:umass-sim0:0:0:0): Unretryable error
> (probe3:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe3:umass-sim1:1:0:0): CAM Status: SCSI Status Error
> (probe3:umass-sim1:1:0:0): SCSI Status: Check Condition
> (probe3:umass-sim1:1:0:0): NOT READY asc:3a,0
> (probe3:umass-sim1:1:0:0): Medium not present
> (probe3:umass-sim1:1:0:0): Unretryable error
> (probe0:mpt0:0:8:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:mpt0:0:8:0): CAM Status: SCSI Status Error
> (probe0:mpt0:0:8:0): SCSI Status: Check Condition
> (probe0:mpt0:0:8:0): UNIT ATTENTION asc:29,0
> (probe0:mpt0:0:8:0): Power on, reset, or bus device reset occurred
> (probe0:mpt0:0:8:0): Retrying Command (per Sense Data)
> ses0 at mpt0 bus 0 target 8 lun 0
> ses0: <IBM 25P3495a S320  1 1> Fixed Processor SCSI-2 device
> ses0: 3.300MB/s transfers
> ses0: SAF-TE Compliant Device
> da0 at mpt0 bus 0 target 0 lun 0
> da0: <LSILOGIC 1030 IM 1000> Fixed Direct Access SCSI-2 device
> da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit)
> da0: Command Queueing Enabled
> da0: 34702MB (71071561 512 byte sectors: 255H 63S/T 4424C)
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #3 Launched!
> da1 at umass-sim1 bus 1 target 0 lun 0
> da1: <HUAWEI MMC Storage 2.31> Removable Direct Access SCSI-2 device
> da1: 1.000MB/s transfers
> da1: Attempt to query device size failed: NOT READY, Medium not present
> cd0 at umass-sim0 bus 0 target 0 lun 0
> cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device
> cd0: 1.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
>
>
> with umass not loaded:
> Unknown USB device: vendor 0x12d1 product 0x1414 bus uhub0
> ugen0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00,
> addr 2> on uhub0
>
> # usbdevs -v
> Controller /dev/usb0:
> addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
> (0x1166)(0x0000), rev 1.00
>  port 1 powered
>  port 2 addr 2: full speed, self powered, config 1, HUAWEI
> Mobile(0x1414), HUAWEI Technology(0x12d1), rev 0.00
>  port 3 powered
>  port 4 powered
>
>
> Thanks for your help!
>
>
> --
>        *******************************************************************
>        Don't ever forget to
>                -*HUGME*-
>
> Yield to Temptation ... it may not pass your way again.
>                -- Lazarus Long, "Time Enough for Love"
>



-- 
        *******************************************************************
        Don't ever forget to
                -*HUGME*-

Yield to Temptation ... it may not pass your way again.
                -- Lazarus Long, "Time Enough for Love"