usb/137129: SteelSeries Ikari USB laser mouse not attaching
Alastair Hogge
agh at coolrhaug.com
Sat Jul 25 16:30:05 UTC 2009
The following reply was made to PR usb/137129; it has been noted by GNATS.
From: Alastair Hogge <agh at coolrhaug.com>
To: bug-followup at freebsd.org,
al at devacid.com
Cc: hselasky at c2i.net
Subject: Re: usb/137129: SteelSeries Ikari USB laser mouse not attaching
Date: Sat, 25 Jul 2009 23:58:14 +0800
How can I find out if the mouse is being driven by libusb?
# usbconfig -u 0 -a 3 dump_device_desc dump_curr_config_desc
ugen0.3: <Ikari Laser SteelSeries ApS> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0008
idVendor = 0x04b4
idProduct = 0x121f
bcdDevice = 0x0100
iManufacturer = 0x0001 <SteelSeries ApS>
iProduct = 0x0002 <Ikari Laser>
iSerialNumber = 0x0000 <no string>
bNumConfigurations = 0x0001
Configuration index 0
bLength = 0x0009
bDescriptorType = 0x0002
wTotalLength = 0x0022
bNumInterfaces = 0x0001
bConfigurationValue = 0x0001
iConfiguration = 0x0000 <no string>
bmAttributes = 0x00a0
bMaxPower = 0x0019
Interface 0
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0000
bAlternateSetting = 0x0000
bNumEndpoints = 0x0001
bInterfaceClass = 0x0003
bInterfaceSubClass = 0x0001
bInterfaceProtocol = 0x0002
iInterface = 0x0000 <no string>
Additional Descriptor
bLength = 0x09
bDescriptorType = 0x21
bDescriptorSubType = 0x11
RAW dump:
0x00 | 0x09, 0x21, 0x11, 0x01, 0x00, 0x01, 0x22, 0xe8,
0x08 | 0x00
Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0081
bmAttributes = 0x0003
wMaxPacketSize = 0x0008
bInterval = 0x0001
bRefresh = 0x0000
bSynchAddress = 0x0000
More information about the freebsd-usb
mailing list