HSDPA USB Modem MF626

Fri Aug 7 08:42:38 UTC 2009

On Friday 07 August 2009 04:15:20 Wesley Miranda wrote:
> Hi all,
>
> Connect HSDPA 3G MF626 is FreeBSD8-CURRENT
>
> gw# kldstat
> Id Refs Address    Size     Name
>  1   13 0xc0400000 d72ad8   kernel
>  2    1 0xc1173000 4658     u3g.ko
>  3    1 0xc1178000 b9b0     umass.ko
>  4    1 0xc1184000 4bf4     umodem.ko
>
> 1º run
> /usr/sbin/usb_modeswitch -d 1 -v 0×19d2 -p 0×2000 -V 0×19d2 -P 0×0031
>
> Received inquiry data (detailed identification)
> -------------------------
>   Vendor String: HSPA
>  Product String: USB SCSI CD-ROM
> Revision String: 2.31
> -------------------------
> Device description data (identification)
> -------------------------
> Manufacturer: ZTE, Incorporated
>      Product: ZTE CDMA Technologies MSM
>   Serial No.: not provided
> -------------------------
> Setting up communication with interface 0 ...
> Trying to send the message to endpoint 0x01 ...
>  OK, message successfully sent
> -> Run lsusb to note any changes. Bye.
>
> -----
> 2º dmesg
>
> ugen2.2: <ZTE, Incorporated> at usbus2 (disconnected)
> umass0: at uhub2, port 1, addr 2 (disconnected)
> rl0: link state changed to UP
> rl1: link state changed to UP
> ugen2.2: <ZTE, Incorporated> at usbus2
> umass0: <ZTE, Incorporated ZTE CDMA Technologies MSM, class 0/0, rev
> 2.00/0.00, addr 2> on usbus2 umass0:  8070i (ATAPI) over Bulk-Only; quirks
> = 0x0000
> umass0:0:0:-1: Attached to scbus0
> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
> (probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
> (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (probe0:umass-sim0:0:0:0): Medium not present
> (probe0:umass-sim0:0:0:0): Unretryable error
> cd0 at umass-sim0 bus 0 target 0 lun 0
> cd0: <HSPA USB SCSI CD-ROM 2.31> Removable CD-ROM SCSI-0 device
> cd0: 40.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> ugen2.2: <ZTE, Incorporated> at usbus2 (disconnected)
> umass0: at uhub2, port 1, addr 2 (disconnected)
> (cd0:umass-sim0:0:0:0): lost device
> (cd0:umass-sim0:0:0:0): removing device entry
> ugen2.2: <ZTE, Incorporated> at usbus2
> u3g0: <ZTE, Incorporated ZTE CDMA Technologies MSM, class 0/0, rev
> 2.00/0.00, addr 2> on usbus2 u3g0: Found 3 ports.
> umass0: <ZTE, Incorporated ZTE CDMA Technologies MSM, class 0/0, rev
> 2.00/0.00, addr 2> on usbus2 umass0:  SCSI over Bulk-Only; quirks = 0x0000
> umass0:0:0:-1: Attached to scbus0
> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (probe0:umass-sim0:0:0:0): Medium not present
> (probe0:umass-sim0:0:0:0): Unretryable error
> da1 at umass-sim0 bus 0 target 0 lun 0
> da1: <ZTE MMC Storage 2.31> Removable Direct Access SCSI-2 device
> da1: 40.000MB/s transfers
> da1: Attempt to query device size failed: NOT READY, Medium not present
> ---
> gw# usbconfig -u 2 -a 2 dump_device_desc
> ugen2.2: <ZTE CDMA Technologies MSM ZTE, Incorporated> at usbus2, cfg=0
> md=HOST spd=HIGH (480Mbps) pwr=ON
>
>   bLength = 0x0012
>   bDescriptorType = 0x0001
>   bcdUSB = 0x0200
>   bDeviceClass = 0x0000
>   bDeviceSubClass = 0x0000
>   bDeviceProtocol = 0x0000
>   bMaxPacketSize0 = 0x0040
>   idVendor = 0x19d2
>   idProduct = 0x0031
>   bcdDevice = 0x0000
>   iManufacturer = 0x0002  <ZTE, Incorporated>
>   iProduct = 0x0001  <ZTE CDMA Technologies MSM>
>   iSerialNumber = 0x0003  <1234567890ABCDEF>
>   bNumConfigurations = 0x0001
>
> ----
> 3° run ppp -ddial vivo
> result
>
> Aug  6 21:40:25 gw ppp[1131]: Phase: Using interface: tun0
> Aug  6 21:40:25 gw ppp[1131]: Phase: deflink: Created in closed state
> Aug  6 21:40:25 gw ppp[1131]: tun0: Command: default: set device
> /dev/cuaU0.0 Aug  6 21:40:25 gw ppp[1131]: tun0: Phase: PPP Started
> (interactive mode). Aug  6 21:40:28 gw ppp[1131]: tun0: Command:
> /dev/pts/0: dial vivo Aug  6 21:40:28 gw ppp[1131]: tun0: Command: vivo:
> set phone *99#
> Aug  6 21:40:28 gw ppp[1131]: tun0: Command: vivo: set authname vivo
> Aug  6 21:40:28 gw ppp[1131]: tun0: Command: vivo: set authkey ********
> Aug  6 21:40:28 gw ppp[1131]: tun0: Phase: bundle: Establish
> Aug  6 21:40:28 gw ppp[1131]: tun0: Phase: deflink: closed -> opening
> Aug  6 21:40:28 gw ppp[1131]: tun0: Phase: deflink: Connected!
> Aug  6 21:40:28 gw ppp[1131]: tun0: Phase: deflink: opening -> dial
> Aug  6 21:40:28 gw ppp[1131]: tun0: Chat: deflink: Dial attempt 1 of 1
> Aug  6 21:40:28 gw ppp[1131]: tun0: Phase: deflink: dial -> carrier
> Aug  6 21:40:29 gw ppp[1131]: tun0: Phase: deflink: /dev/cuaU0.0 doesn't
> support CD Aug  6 21:40:29 gw ppp[1131]: tun0: Phase: deflink: carrier ->
> login Aug  6 21:40:29 gw ppp[1131]: tun0: Phase: deflink: login -> lcp
> Aug  6 21:40:33 gw ppp[1131]: tun0: Phase: Unknown protocol 0x0013
> (reserved (transparency inefficient)) Aug  6 21:40:45 gw last message
> repeated 19312 times
> Aug  6 21:40:45 gw ppp[1131]: tun0: Phase: deflink: Disconnected!
> Aug  6 21:40:45 gw ppp[1131]: tun0: Phase: deflink: lcp -> logout
> Aug  6 21:40:45 gw ppp[1131]: tun0: Phase: deflink: logout -> hangup
> Aug  6 21:40:45 gw ppp[1131]: tun0: Phase: deflink: Disconnected!
> Aug  6 21:40:45 gw ppp[1131]: tun0: Phase: deflink: Connect time: 17 secs:
> 386280 octets in, 907991 octets out Aug  6 21:40:45 gw ppp[1131]: tun0:
> Phase: deflink: 8767 packets in, 19318 packets out Aug  6 21:40:45 gw
> ppp[1131]: tun0: Phase:  total 76133 bytes/sec, peak 133153 bytes/sec on
> Thu Aug  6 21:40:45 2009 Aug  6 21:40:45 gw ppp[1131]: tun0: Phase:
> deflink: hangup -> closed Aug  6 21:40:45 gw ppp[1131]: tun0: Phase:
> bundle: Dead
>
> tun0: flags=8050<POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1500
>         Opened by PID 977
>
> no ip network :(
>
> modified as described for MF626 and does not work
> http://www.mail-archive.com/freebsd-usb@freebsd.org/msg04956.html diff.
>
> has solution for this problem?

Hi,

Try to add this to ppp.conf:

 disable pred1 deflate deflate24 protocomp acfcomp shortseq vj mppe
 enable dns

--HPS

> Thanks all
> -----
> Wesley Miranda
> FreeBSD Consult
> www.freebsdconsult.com.br
> _______________________________________________
> freebsd-usb at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-usb
> To unsubscribe, send any mail to "freebsd-usb-unsubscribe at freebsd.org"