kern/120034: 6.2 & 6.3 hangs on boot at usb0: OHCI with 1.5 G memory, works with 512 M

[Kenneth]

The following reply was made to PR usb/120034; it has been noted by GNATS.

From: Kenneth <kennethcf at earthlink.net>
To: Remko Lodder <remko at FreeBSD.org>
Cc: freebsd-gnats-submit at FreeBSD.org
Subject: Re: kern/120034: 6.2 & 6.3 hangs on boot at usb0: OHCI with 1.5 G
 memory, works with 512 M
Date: Sun, 27 Jan 2008 14:32:56 -0500 (GMT-05:00)

 I forgot to mention my hardware:
 emachines T5048
 Intel Grant County 2 motherboard:  D102GGC2
 BIOS: GC11020M.86A.1087.2007.0130.1451
 - Pentium 4 524 Hyperthreaded, 3.06 GHz, 533 MHz FSB, 1 MB L2
 - ATI Radeon XPRESS 200 Northbridge
 - ATI IXP 450 Southbridge
 - 4 Mbit Firmware Hub (FWH)
 - Memory is 1.0 G DDR2 (slot 0), and 0.5 G DDR2 (slot 1)
 - XP works
 
 Intel Product Guide:  d4798502_en.pdf
 Technical Spec:  d4427801us.pdf
 Technical Spec Update:  d5947403us.pdf
 
 
 
 
 -----Original Message-----
 >From: Remko Lodder <remko at FreeBSD.org>
 >Sent: Jan 27, 2008 5:44 AM
 >To: Kenneth Freidank <kennethcf at earthlink.net>
 >Cc: freebsd-gnats-submit at FreeBSD.org
 >Subject: Re: kern/120034: 6.2 & 6.3 hangs on boot at usb0: OHCI with 1.5 G memory, works with 512 M
 >
 >Kenneth Freidank wrote:
 >
 >Could you disable USB support in the bios and see where that leads
 >up to? could it be that the additional memory kicks in the USB
 >controller? and/or perhaps any other region?
 >
 >You did not provide a full boot dmesg btw; just giving parts of
 >it makes it very hard to see what might be going on, in addition
 >it could be interesting to start the freebsd installation without
 >acpi support, and doing a boot verbose (that's 2 additional things
 >we might like to see).
 >
 >Thanks,
 >remko
 >
 >-- 
 >/"\   Best regards,                      | remko at FreeBSD.org
 >\ /   Remko Lodder                       | remko at EFnet
 >  X    http://www.evilcoder.org/          |
 >/ \   ASCII Ribbon Campaign              | Against HTML Mail and News