usb/112461: ehci USB 2.0 doesn't work on nforce4

Igor Popov igorpopov at newmail.ru
Mon May 7 07:04:00 UTC 2007 

	Good morning.
> On Sunday 06 May 2007 13:51, Igor Popov wrote:
> > >Number:         112461
> > >Category:       usb
> > >Synopsis:       ehci USB 2.0 doesn't work on nforce4
> > >Confidential:   no
> > >Severity:       non-critical
> > >Priority:       medium
> > >Responsible:    freebsd-usb
> > >State:          open
> > >Quarter:
> > >Keywords:
> > >Date-Required:
> > >Class:          sw-bug
> > >Submitter-Id:   current-users
> > >Arrival-Date:   Sun May 06 12:00:11 GMT 2007
> > >Closed-Date:
> > >Last-Modified:
> > >Originator:     Igor Popov
> > >Release:        6.0, 6.1, 6.2
> > >Organization:
> > >Environment:
> >
> > FreeBSD unix.my.net 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Sat Jan 27
> > 13:01:18 EET 2007     toor at unix.my.net:/usr/obj/usr/src/sys/SUPERKERNEL 
> > i386
> >
> > >Description:
> >
> > I have motherboard(Asus A8N-E) that built on nforce4 chipset, it has usb
> > 2.0 ports, but under FreeBSD with usb 2.0 flashdrive max speed near
> > 1.2Mb/s on file copying (my custom kernel has ehci driver), that is
> > usb1.[01] speed. But under both linux an windows with the same flashdrive
> > speed is near 10Mb/s.
> >
> > Copyright (c) 1992-2007 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> >         The Regents of the University of California. All rights reserved.
> > FreeBSD is a registered trademark of The FreeBSD Foundation.
> > FreeBSD 6.2-RELEASE #0: Sat Jan 27 13:01:18 EET 2007
> >     toor at unix.my.net:/usr/obj/usr/src/sys/SUPERKERNEL
> > ACPI APIC Table: <Nvidia AWRDACPI>
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > CPU: AMD Athlon(tm) 64 Processor 3000+ (1809.28-MHz 686-class CPU)
> >   Origin = "AuthenticAMD"  Id = 0x20ff2  Stepping = 2
> >
> > Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M
> >CA ,CM OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
> >   Features2=0x1<SSE3>
> >   AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
> >   AMD Features2=0x1<LAHF>
> > real memory  = 536805376 (511 MB)
> > avail memory = 507523072 (484 MB)
> > ioapic0 <Version 1.1> irqs 0-23 on motherboard
> > wlan: mac acl policy registered
> > ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
> > RF5413) acpi0: <Nvidia AWRDACPI> on motherboard
> > acpi_bus_number: can't get _ADR
> > acpi_bus_number: can't get _ADR
> > acpi0: Power Button (fixed)
> > acpi_bus_number: can't get _ADR
> > acpi_bus_number: can't get _ADR
> > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> > cpu0: <ACPI CPU> on acpi0
> > acpi_button0: <Power Button> on acpi0
> > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> > pci0: <ACPI PCI bus> on pcib0
> > pci0: <memory> at device 0.0 (no driver attached)
> > isab0: <PCI-ISA bridge> at device 1.0 on pci0
> > isa0: <ISA bus> on isab0
> > nfsmb0: <nForce2/3/4 MCP SMBus Controller> port
> > 0xe400-0xe41f,0x4c00-0x4c3f,0x4c 40-0x4c7f irq 20 at device 1.1 on pci0
> > smbus0: <System Management Bus> on nfsmb0
> > smb0: <SMBus generic I/O> on smbus0
> > nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0
> > smbus1: <System Management Bus> on nfsmb1
> > smb1: <SMBus generic I/O> on smbus1
> > ohci0: <OHCI (generic) USB controller> mem 0xd3104000-0xd3104fff irq 21
> > at devic e 2.0 on pci0
> > ohci0: [GIANT-LOCKED]
> > usb0: OHCI version 1.0, legacy support
> > usb0: <OHCI (generic) USB controller> on ohci0
> > usb0: USB revision 1.0
> > uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > uhub0: 10 ports with 10 removable, self powered
> > ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq
> > 22 at d evice 2.1 on pci0
> > ehci0: [GIANT-LOCKED]
> > usb1: EHCI version 1.0
> > usb1: companion controller, 4 ports each: usb0
> > usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
> > usb1: USB revision 2.0
> > uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> > uhub1: 10 ports with 10 removable, self powered
> > pcm0: <nVidia nForce4> port 0xdc00-0xdcff,0xe000-0xe0ff mem
> > 0xd3103000-0xd3103ff f irq 23 at device 4.0 on pci0
> > pcm0: <Avance Logic ALC850 AC97 Codec>
> > atapci0: <nVidia nForce CK804 UDMA133 controller> port
> > 0x1f0-0x1f7,0x3f6,0x170-0 x177,0x376,0xf000-0xf00f at device 6.0 on pci0
> > ata0: <ATA channel 0> on atapci0
> > ata1: <ATA channel 1> on atapci0
> > atapci1: <nVidia nForce CK804 SATA300 controller> port
> > 0x9f0-0x9f7,0xbf0-0xbf3,0 x970-0x977,0xb70-0xb73,0xd800-0xd80f mem
> > 0xd3102000-0xd3102fff irq 21 at device 7.0 on pci0
> > ata2: <ATA channel 0> on atapci1
> > ata3: <ATA channel 1> on atapci1
> > atapci2: <nVidia nForce CK804 SATA300 controller> port
> > 0x9e0-0x9e7,0xbe0-0xbe3,0 x960-0x967,0xb60-0xb63,0xc400-0xc40f mem
> > 0xd3101000-0xd3101fff irq 22 at device 8.0 on pci0
> > ata4: <ATA channel 0> on atapci2
> > ata5: <ATA channel 1> on atapci2
> > pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
> > pci5: <ACPI PCI bus> on pcib1
> > ath0: <Atheros 5212> mem 0xd3000000-0xd300ffff irq 16 at device 6.0 on
> > pci5 ath0: Ethernet address: 00:15:e9:a4:58:9b
> > ath0: mac 7.9 phy 4.5 radio 5.6
> > nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0xb000-0xb007
> > mem 0xd3 100000-0xd3100fff irq 23 at device 10.0 on pci0
> > miibus0: <MII bus> on nfe0
> > e1000phy0: <Marvell 88E1111 Gigabit PHY> on miibus0
> > e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> > 1000baseTX-FDX, auto nfe0: Ethernet address: 00:17:31:13:8d:3f
> > nfe0: [FAST]
> > pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
> > pci4: <ACPI PCI bus> on pcib2
> > pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
> > pci3: <ACPI PCI bus> on pcib3
> > pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
> > pci2: <ACPI PCI bus> on pcib4
> > pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
> > pci1: <ACPI PCI bus> on pcib5
> > nvidia0: <GeForce 7900 GT/GTO> port 0xa000-0xa07f mem
> > 0xd0000000-0xd0ffffff,0xc0 000000-0xcfffffff,0xd1000000-0xd1ffffff irq 18
> > at device 0.0 on pci1 nvidia0: [GIANT-LOCKED]
> > acpi_tz0: <Thermal Zone> on acpi0
> > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
> > acpi0 fdc0: [FAST]
> > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> > acpi0 sio0: type 16550A
> > ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
> > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> > ppbus0: <Parallel port bus> on ppc0
> > lpt0: <Printer> on ppbus0
> > lpt0: Interrupt-driven port
> > ppi0: <Parallel I/O> on ppbus0
> > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> > atkbd0: <AT Keyboard> irq 1 on atkbdc0
> > atkbd0: [GIANT-LOCKED]
> > psm0: <PS/2 Mouse> irq 12 on atkbdc0
> > psm0: [GIANT-LOCKED]
> > psm0: model IntelliMouse, device ID 3
> > pmtimer0 on isa0
> > sc0: <System console> at flags 0x100 on isa0
> > sc0: VGA <16 virtual consoles, flags=0x300>
> > sio1: configured irq 3 not in bitmap of probed irqs 0
> > sio1: port may not be enabled
> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> > Timecounter "TSC" frequency 1809282513 Hz quality 800
> > Timecounters tick every 1.000 msec
> > ad0: 238475MB <HDS722525VLAT80 V36OA6MA> at ata0-master UDMA100
> > acd0: DVDR <ASUS DRW-1608P/1.59> at ata1-master UDMA66
> > ad1: 190782MB <Seagate ST3200822AS 3.01> at ata5-master SATA150
> > Trying to mount root from ufs:/dev/ad0s2a
> > ath0: link state changed to UP
> > nfe0: link state changed to UP
> > umass0: vendor 0x0457 USB Mass Storage Device, rev 2.00/1.00, addr 2
> > da0 at umass-sim0 bus 0 target 0 lun 0
> > da0: <USB 2.0 Flash Disk 0.00> Removable Direct Access SCSI-2 device
> > da0: 40.000MB/s transfers
> > da0: 3920MB (8028160 512 byte sectors: 255H 63S/T 499C)
>
> This is maybe a SCSI problem.
>
> If you install the new USB stack [the SVN version], see:
>
> http://www.turbocat.net/~hselasky/usb4bsd
>
> Then try to copy some files and turn on debugging:
>
> sysctl hw.usb.umass.debug=-1
>
> You might get a lot of messages. Look for errors.

No, it is standard kernel from RELENG_6_2 branch, usb stack is not modified.

-- 
Laugh and the world thinks you're an idiot.

More information about the freebsd-usb mailing list