usb/112460: ehci USB 2.0 doesn't work on nforce4

Sun May 6 11:50:03 UTC 2007

>Number:         112460
>Category:       usb
>Synopsis:       ehci USB 2.0 doesn't work on nforce4
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    freebsd-usb
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sun May 06 11:50:02 GMT 2007
>Closed-Date:
>Last-Modified:
>Originator:     Igor Popov
>Release:        6.0, 6.1, 6.2
>Organization:
>Environment:
FreeBSD unix.my.net 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Sat Jan 27 13:01:18 EET 2007     toor at unix.my.net:/usr/obj/usr/src/sys/SUPERKERNEL  i386

>Description:
I have motherboard(Asus A8N-E) that built on nforce4 chipset, it has usb 2.0 ports, but under FreeBSD with usb 2.0 flashdrive max speed near 1.2Mb/s on file copying (my custom kernel has ehci driver), that is usb1.[01] speed. But under both linux an windows with the same flashdrive speed is near 10Mb/s.

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Sat Jan 27 13:01:18 EET 2007
    toor at unix.my.net:/usr/obj/usr/src/sys/SUPERKERNEL
ACPI APIC Table: <Nvidia AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1809.28-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
  AMD Features2=0x1<LAHF>
real memory  = 536805376 (511 MB)
avail memory = 507523072 (484 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
wlan: mac acl policy registered
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
nfsmb0: <nForce2/3/4 MCP SMBus Controller> port 0xe400-0xe41f,0x4c00-0x4c3f,0x4c
40-0x4c7f irq 20 at device 1.1 on pci0
smbus0: <System Management Bus> on nfsmb0
smb0: <SMBus generic I/O> on smbus0
nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0
smbus1: <System Management Bus> on nfsmb1
smb1: <SMBus generic I/O> on smbus1
ohci0: <OHCI (generic) USB controller> mem 0xd3104000-0xd3104fff irq 21 at devic
e 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq 22 at d
evice 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
pcm0: <nVidia nForce4> port 0xdc00-0xdcff,0xe000-0xe0ff mem 0xd3103000-0xd3103ff
f irq 23 at device 4.0 on pci0
pcm0: <Avance Logic ALC850 AC97 Codec>
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0
x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0
x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xd3102000-0xd3102fff irq 21 at device
7.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce CK804 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0
x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xd3101000-0xd3101fff irq 22 at device
8.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib1
ath0: <Atheros 5212> mem 0xd3000000-0xd300ffff irq 16 at device 6.0 on pci5
ath0: Ethernet address: 00:15:e9:a4:58:9b
ath0: mac 7.9 phy 4.5 radio 5.6
nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0xb000-0xb007 mem 0xd3
100000-0xd3100fff irq 23 at device 10.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1111 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: Ethernet address: 00:17:31:13:8d:3f
nfe0: [FAST]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci2: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci1: <ACPI PCI bus> on pcib5
nvidia0: <GeForce 7900 GT/GTO> port 0xa000-0xa07f mem 0xd0000000-0xd0ffffff,0xc0
000000-0xcfffffff,0xd1000000-0xd1ffffff irq 18 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1809282513 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 238475MB <HDS722525VLAT80 V36OA6MA> at ata0-master UDMA100
acd0: DVDR <ASUS DRW-1608P/1.59> at ata1-master UDMA66
ad1: 190782MB <Seagate ST3200822AS 3.01> at ata5-master SATA150
Trying to mount root from ufs:/dev/ad0s2a
ath0: link state changed to UP
nfe0: link state changed to UP
umass0: vendor 0x0457 USB Mass Storage Device, rev 2.00/1.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB 2.0 Flash Disk 0.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 3920MB (8028160 512 byte sectors: 255H 63S/T 499C)

>How-To-Repeat:
always
>Fix:

>Release-Note:
>Audit-Trail:
>Unformatted: