Nikon Coolpix 5200 hangs system

[Rashid N. Achilov]

How do you do.

FreeBSD 6.2-RELEASE.

 When I have tried to connect Nikon Coolpix 5200 to USB, system hangs. Yes, it 
detects camera as flash:

to-495 kernel: umass0: NIKON NIKON DSC E5200, rev 1.10/1.00, addr 2
to-495 kernel: da0 at umass-sim0 bus 0 target 0 lun 0
to-495 kernel: da0:<NIKON DSC E5200>Removable Direct Access SCSI-2 device 
to-495 kernel: da0: 1.000MB/s transfers
to-495 kernel: da0: 120MB (246016 512 byte sectors: 64H 32S/T 120C)

but hangs at any next command, entered atfer connecting USB cord (i.e. 
camcontrol devlist). Log filled with these messages:

to-495 kernel: umass0: BBB reset failed, STALLED
to-495 kernel: umass0: BBB bulk-in clear stall failed, STALLED
to-495 kernel: umass0: BBB bulk-out clear stall failed, STALLED
to-495 kernel: (da0:umass-sim0:0:0:0): Synchronize cache failed, status ==
 0x4, scsi status == 0x0
to-495 kernel: umass0: BBB reset failed, STALLED
to-495 kernel: umass0: BBB bulk-in clear stall failed, STALLED
to-495 kernel: umass0: BBB bulk-out clear stall failed, STALLED

Is there a way to transfer content from camera to box? After disconnecting 
USB, system runs OK
-- 
   With Best Regards.
   Rashid N. Achilov (RNA1-RIPE), Web: http://www.askd.ru/~shelton
   OOO "ACK" telecommunications administrator, e-mail: achilov-rn [at] askd.ru
   PGP: 83 CD E2 A7 37 4A D5 81 D6 D6 52 BF C9 2F 85 AF 97 BE CB 0A