Call for Testers: FreeBSD webcam driver (and more)

[Ali Mashtizadeh]

Hi,

Good to see that a driver is coming for webcam's but sorry no success on
either I have on me right now:

IBM PC Camera - Failed to recognize

spcaDetectCamera called vend 0x545 prod 0x8080 p 0xc91a4334
spcaCameraDetect failed
spcaDetectCamera called vend 0x545 prod 0x8080 p 0xc91a4334
spcaCameraDetect failed
spcaDetectCamera called vend 0x545 prod 0x8080 p 0xc91a4334
spcaCameraDetect failed
spcaDetectCamera called vend 0x545 prod 0x8080 p 0xc91a4334
spcaCameraDetect failed
ugen1: vendor 0x0545 USB IMAGING DEVICE, rev 1.01/3.0a, addr 5

Intel PC Camera CS780 - Failed to recognize but it clicked as if it tried to
take a picture when I plugged in thats not normal without the driver

spcaDetectCamera called vend 0x8086 prod 0x780 p 0xc91a1334
spcaCameraDetect failed
spcaDetectCamera called vend 0x8086 prod 0x780 p 0xc91a1334
spcaCameraDetect failed
spcaDetectCamera called vend 0x8086 prod 0x780 p 0xc91a1334
spcaCameraDetect failed
spcaDetectCamera called vend 0x8086 prod 0x780 p 0xc91a1334
spcaCameraDetect failed
spcaDetectCamera called vend 0x8086 prod 0x780 p 0xc91a1334
spcaCameraDetect failed
spcaDetectCamera called vend 0x8086 prod 0x780 p 0xc91a1334
spcaCameraDetect failed
ugen0: Intel Corporation Intel(r) PC Camera CS780, rev 1.10/1.00, addr 4

-- 
Ali Mashtizadeh
علی مشتی زاده

On 1/31/07, Eric L. Chen <d9364104 at mail.nchu.edu.tw> wrote:
>
> Hi Luigi,
> The pwc.ko can detect my webcam (Orite MB-631), but pwcview cannot work.
> I am using FreeBSD 6-stable.
> The conosle log is here
> -----
> spca50x_set_packet_size: Set packet size: size (0), alt becomes 0
> spca5xx_setMode Looking for 352 x 288 palette 0x8
> spca5xx_setMode have 0 x 0 palette 0x0 method 0
> spca5xx_setMode have 0 x 0 palette 0x0 method 0
> spca5xx_setMode have 0 x 0 palette 0x0 method 0
> spca5xx_setMode have 352 x 288 palette 0x2f method 0
> Found code 0 method 0 Soft Win width height 352 x 288 Hard Win width
> height 352 x 288
> spca50x_set_packet_size: Set packet size: size (2580), alt becomes 5
> spca camera, call spca5xx_setMode alt now 5
> em2820_init: to be done
> chipid 0x11
> format 0x34
> cwidth 0xa0
> cheight 0x78
> spca5xx_setMode Looking for 352 x 288 palette 0x8
> spca5xx_setMode have 0 x 0 palette 0x0 method 0
> spca5xx_setMode have 0 x 0 palette 0x0 method 0
> spca5xx_setMode have 0 x 0 palette 0x0 method 0
> spca5xx_setMode have 352 x 288 palette 0x2f method 0
> Found code 0 method 0 Soft Win width height 352 x 288 Hard Win width
> height 352 x 288
> spcaCameraStart: unknown bridge 24 (non fatal but should)
> endpoint 2 frame size 2580
> pwc0: Invalid packetsize (2580) for endpoint 130
> -----
>
> /Eric
>
>
>