7.0-BETA3 kernel panic when unplugging USB stick

[Andriy Gapon]

on 27/11/2007 10:55 Remko Lodder said the following:
> [snip]
> 
>> Just in case:
>> the reader - Trust CR-1420P
>> the card - SanDisk SDSDM-2048
> 
> The above information is not really informative for me , can you send a
> dmesg -v and pciconf -vl so that we might trick it into getting supported
> by the current drivers? :)

>From usbdevs -vd:
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
nVidia(0x0000), rev 1.00
  uhub1
...
 port 4 addr 2: high speed, power 100 mA, config 1, product
0x6362(0x6362), vendor 0x058f(0x058f), rev 1.26
   umass0

>From dmesg:
umass0: Generic Mass Storage Device, rev 2.00/1.26, addr 2
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
(da0:umass-sim0:0:0:0): got CAM status 0x4
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
(da0:umass-sim0:0:0:0): lost device

>From pciconf- lv:
ehci0 at pci0:11:1:        class=0x0c0320 card=0x81c01043 chip=0x026e10de
rev=0xa3 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = serial bus
    subclass = USB

>From camcontrol devlist -v:
scbus6 on umass-sim0 bus 0:
<Generic USB SD Reader 1.00>       at scbus6 target 0 lun 0 (da0,pass2)
<  >                               at scbus6 target 0 lun 2 (probe0)
<  >                               at scbus6 target -1 lun -1 ()

-- 
Andriy Gapon