Toshiba Portege G900 support request

[Andrey Mikhailov]

Is it possible to add this device support ?


# udesc_dump /dev/ugen0
Standard Device Descriptor:
 bLength            18
 bDescriptorType    01
 bcdUSB             0200
 bDeviceClass       ef
 bDeviceSubClass    01
 bDeviceProtocol    01
 bMaxPacketSize     16
 idVendor           0930
 idProduct          0d29
 bcdDevice          0000
 iManufacturer      1
 iProduct           2
 iSerialNumber      3
 bNumConfigurations 1

Configuration 0:
       Standard Configuration Descriptor:
         bLength             9
         bDescriptorType     02
         wTotalLength        62
         bNumInterface       2
         bConfigurationValue 1
         iConfiguration      0
         bmAttributes        c0 (self-powered)
         bMaxPower           250 (500 mA)

       Standard Interface Descriptor:
         bLength            9
         bDescriptorType    04
         bInterfaceNumber   0
         bAlternateSetting  0
         bNumEndpoints      1
         bInterfaceClass    ef
         bInterfaceSubClass 01
         bInterfaceProtocol 01
         iInterface         0

               Descriptor:
                 bLength            5
                 bDescriptorType    24
                 bDescriptorSubtype 01
               05 24 01 00 01

               Descriptor:
                 bLength            4
                 bDescriptorType    24
                 bDescriptorSubtype 02
               04 24 02 00

               Descriptor:
                 bLength            5
                 bDescriptorType    24
                 bDescriptorSubtype 02
               05 24 02 00 01

       Standard Endpoint Descriptor:
         bLength          7
         bDescriptorType  05
         bEndpointAddress 81 (in)
         bmAttributes     03 (Interrupt)
         wMaxPacketSize   8
         bInterval        1

       Standard Interface Descriptor:
         bLength            9
         bDescriptorType    04
         bInterfaceNumber   1
         bAlternateSetting  0
         bNumEndpoints      2
         bInterfaceClass    0a
         bInterfaceSubClass 00
         bInterfaceProtocol 00
         iInterface         0

       Standard Endpoint Descriptor:
         bLength          7
         bDescriptorType  05
         bEndpointAddress 82 (in)
         bmAttributes     02 (Bulk)
         wMaxPacketSize   64
         bInterval        0

       Standard Endpoint Descriptor:
         bLength          7
         bDescriptorType  05
         bEndpointAddress 03 (out)
         bmAttributes     02 (Bulk)
         wMaxPacketSize   64
         bInterval        0

Codes Representing Languages by the Device:
 bLength          4
 bDescriptorType  03
 wLANGID[0]       0409

String (index 1): Toshiba Corporation

String (index 2): Toshiba RNDIS

String (index 3): e6461300-3205-0801-3804-0dd0120906ff


And when I put em to mass storage mode i got the following message in dmesg
umass0: <Generic Manufacturer (PROTOTYPE--Remember to change idVendor) 
Generic Mass Storage (PROTOTYPE--Remember to change idVendor), class 
0/0, rev 2.00/0.00, addr 3> on uhub2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <  > Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 1964MB (4022272 512 byte sectors: 255H 63S/T 250C)


dmesg -a
FreeBSD fusion 7.0-BETA2 FreeBSD 7.0-BETA2 #11: Wed Nov  7 19:35:15 EET 
2007     root at fusion:/.1/.bsdstaff/obj/.1/.bsdstaff/src/sys/ZLOVRED  i386

Thanks in advance.