USB problems on Dell E521

Jean-Baptiste Quenot jbq at caraldi.com
Thu Oct 19 15:08:28 UTC 2006 

Hi,

I'm forwarding  this message  [1]initially posted on  the hardware
list.  Here  is a summary  of the USB  problems I encounter  on my
brand new Dell E521 AMD64.

To make FreeBSD boot, I have to:

* disable the front USB panel, and  one of the two rear USB panels
  in the BIOS otherwise the keyboard and mouse do not work

* unplug the  mouse during the boot, otherwise  keyboard and mouse
  do not work.  I plug it in again once entering user-land

I also  have a very annoying  problem: when I run  Xorg, the mouse
freezes after about 5 minutes of  mouse activity, I have to unplug
it.  As soon as  I plug it in again, mouse  moves freely.  I tried
with another mouse, same problem.   Restarting Xorg does not help.
Restarting moused either.

Any  idea to  solve  the  USB mouse  problem  would  be more  than
helpful.  You will find attached the dmesg output, just in case.

Some more observations:

* I tried  using the [2]USB  patch, it slightly changes  the error
  messages, retries to  assign an address to the USB  device a few
  times and gives up.

* I was using FreeBSD  6.1-RELEASE, and upgraded to 6.2-PRERELEASE
  (checked out from RELENG_6) but that didn't change anything.

* I tried booting the Ubuntu Live  CD, and it boots fine.  However
  the mouse freezes in Xorg after  a few minutes of mouse activity
  like in FreeBSD.

Please find attached the dmesg  output, thanks in advance for your
help.
-- 
     Jean-Baptiste Quenot
aka  John Banana Qwerty
http://caraldi.com/jbq/

[1] http://lists.freebsd.org/pipermail/freebsd-hardware/2006-October/003942.html
[2] http://people.freebsd.org/~iedowse/usb.diff
-------------- next part --------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #0: Sat Oct 14 18:12:52 CEST 2006
    jbq at zoupla.cottages:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3800+ (2405.03-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory  = 1005453312 (958 MB)
avail memory = 959361024 (914 MB)
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL bMk    > on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <display, VGA> at device 5.0 (no driver attached)
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <memory, RAM> at device 10.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 15 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 7 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
atapci0: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 11 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 10 at device 15.0 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xfdbfe000-0xfdbfffff irq 5 at device 7.0 on pci4
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:13:72:33:1e:42
pci0: <multimedia> at device 16.1 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub0: device problem (SET_ADDR_FAILED), disabling port 4
Timecounter "TSC" frequency 2405033974 Hz quality 800
Timecounters tick every 1.000 msec
ad4: 238418MB <Seagate ST3250824AS 3.ADH> at ata2-master SATA300
Trying to mount root from ufs:/dev/ad4s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...8 5 5 3 1 0 0 done
All buffers synced.
Uptime: 28s
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Powering system off using ACPI
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #0: Sat Oct 14 18:12:52 CEST 2006
    jbq at zoupla.cottages:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3800+ (2405.03-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory  = 1005453312 (958 MB)
avail memory = 959361024 (914 MB)
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL bMk    > on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <display, VGA> at device 5.0 (no driver attached)
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <memory, RAM> at device 10.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 15 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 7 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
atapci0: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 11 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 10 at device 15.0 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xfdbfe000-0xfdbfffff irq 5 at device 7.0 on pci4
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:13:72:33:1e:42
pci0: <multimedia> at device 16.1 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: DELL DELL USB Keyboard, rev 1.10/1.05, addr 2, iclass 3/1
kbd0 at ukbd0
Timecounter "TSC" frequency 2405031978 Hz quality 800
Timecounters tick every 1.000 msec
ad4: 238418MB <Seagate ST3250824AS 3.ADH> at ata2-master SATA300
Trying to mount root from ufs:/dev/ad4s1a
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
pid 2289 (muttng), uid 1001: exited on signal 11 (core dumped)
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
pid 2262 (gaim), uid 1001: exited on signal 6 (core dumped)
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...4 2 3 1 0 0 done
All buffers synced.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #0: Sun Oct 15 22:48:24 CEST 2006
    jbq at zoupla.cottages:/usr/obj/usr/src/sys/ZOUPLA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3800+ (2405.03-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory  = 1005453312 (958 MB)
avail memory = 958681088 (914 MB)
kbd1 at kbdmux0
acpi0: <DELL bMk    > on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <display, VGA> at device 5.0 (no driver attached)
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <memory, RAM> at device 10.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 15 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 11.1 (no driver attached)
atapci0: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 11 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 10 at device 15.0 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xfdbfe000-0xfdbfffff irq 5 at device 7.0 on pci4
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:13:72:33:1e:42
pci0: <multimedia> at device 16.1 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub0: device problem (SET_ADDR_FAILED), disabling port 4
Timecounter "TSC" frequency 2405029908 Hz quality 800
Timecounters tick every 1.000 msec
ad4: 238418MB <Seagate ST3250824AS 3.ADH> at ata2-master SATA300
Trying to mount root from ufs:/dev/ad4s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...8 5 4 3 2 0 0 done
All buffers synced.
Uptime: 24s
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Powering system off using ACPI
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #0: Sun Oct 15 22:48:24 CEST 2006
    jbq at zoupla.cottages:/usr/obj/usr/src/sys/ZOUPLA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3800+ (2405.03-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory  = 1005453312 (958 MB)
avail memory = 958681088 (914 MB)
kbd1 at kbdmux0
acpi0: <DELL bMk    > on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <display, VGA> at device 5.0 (no driver attached)
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <memory, RAM> at device 10.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 15 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 11.1 (no driver attached)
atapci0: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 11 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 10 at device 15.0 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xfdbfe000-0xfdbfffff irq 5 at device 7.0 on pci4
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:13:72:33:1e:42
pci0: <multimedia> at device 16.1 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: DELL DELL USB Keyboard, rev 1.10/1.05, addr 2, iclass 3/1
kbd0 at ukbd0
Timecounter "TSC" frequency 2405028042 Hz quality 800
Timecounters tick every 1.000 msec
ad4: 238418MB <Seagate ST3250824AS 3.ADH> at ata2-master SATA300
Trying to mount root from ufs:/dev/ad4s1a
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
pid 1664 (gaim), uid 1001: exited on signal 6 (core dumped)
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
stray irq7
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
stray irq7
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech M4848, rev 1.00/5.00, addr 3, iclass 3/1
ums0: 1 buttons.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
too many stray irq 7's: not logging anymore

More information about the freebsd-usb mailing list