umass not working with MP3 Player

[mag at intron.ac]

So does my digital camera. Mmm ...

Peter Jeremy wrote:

> My wife got a MP3 player for mother's day.  Whilst I managed to confirm
> that it was a standard USB mass storage device before buying it, it
> seems that FreeBSD (6.1-RELEASE) doesn't like it.
> 
> It identifies as:
> umass0: EM706S EM706S MP3 Player, rev 1.10/10.01, addr 2
> umass0: SCSI over Bulk-Only; quirks = 0x0000
> umass0:2:0:-1: Attached to scbus2
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <EM706S MP3 Player 0100> Removable Direct Access SCSI-4 device 
> da0: 1.000MB/s transfers
> da0: 491MB (251456 2048 byte sectors: 64H 32S/T 122C)
> 
> usbdevs reports:
>  port 3 addr 2: full speed, power 100 mA, config 1, EM706S MP3 Player(0x0706), EM706S(0x067f), rev 10.01
> 
> But an attempt to read from it (with hw.usb.umass.debug=0xffff0000) returns:
> turion% dd if=/dev/da0 bs=512 count=1 >/dev/null
> umass0:2:0:0:XPT_SCSI_IO: cmd: 0x25, flags: 0x40, 10b cmd/8b data/32b sense
> umass0: CBW 50: cmd = 10b (0x250000000000...), data = 8b, dir = in
> umass0: Handling BBB state 2 (BBB CBW), xfer=0xffffff002a822a00, NORMAL_COMPLETION
> umass0: Handling BBB state 3 (BBB Data), xfer=0xffffff002992f800, NORMAL_COMPLETION
> umass0: 0x 0003d63f00000800 buffer=0xffffff001aac8240, buflen=8
> umass0: Handling BBB state 5 (BBB CSW, 1st attempt), xfer=0xffffff0028b48800, NORMAL_COMPLETION
> umass0: CSW 50: sig = 0x53425355 (valid), tag = 50, res = 0, status = 0x00 (good)
> umass0:2:0:0:XPT_SCSI_IO: cmd: 0x1e, flags: 0xc0, 6b cmd/0b data/32b sense
> umass0: CBW 51: cmd = 6b (0x1e0000000100), data = 0b, dir = out
> umass0: Handling BBB state 2 (BBB CBW), xfer=0xffffff002a822a00, NORMAL_COMPLETION
> umass0: no data phase
> umass0: Handling BBB state 5 (BBB CSW, 1st attempt), xfer=0xffffff0028b48800, NORMAL_COMPLETION
> umass0: CSW 51: sig = 0x53425355 (valid), tag = 51, res = 0, status = 0x00 (good)
> dd: /dev/da0: Invalid argument
> 0+0 records in
> 0+0 records out
> 0 bytes transferred in 0.000197 secs (0 bytes/sec)
> 
> I've tried comparing it with a BBB umass device that works and there
> is no immediately obvious difference except that the good device
> continues to perform further SCSI commands instead of returning EINVAL.
> 
> Any suggestions on how to proceed further?
> 
> -- 
> Peter Jeremy
> _______________________________________________
> freebsd-usb at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-usb
> To unsubscribe, send any mail to "freebsd-usb-unsubscribe at freebsd.org"



------------------------------------------------------------------------
                                                From Beijing, China