usb/72380: [usb] USB does not work [dual Celeron Abit]
Thierry Herbelot
thierry at herbelot.com
Thu Jun 1 14:20:30 PDT 2006
The following reply was made to PR usb/72380; it has been noted by GNATS.
From: Thierry Herbelot <thierry at herbelot.com>
To: bug-followup at freebsd.org, nrgaravelli at yahoo.com
Cc:
Subject: Re: usb/72380: [usb] USB does not work [dual Celeron Abit]
Date: Thu, 1 Jun 2006 23:18:12 +0200
the problem is absent in -current as of now :
the same make of computer (ABIT BP6) runs happily with USB devices off the
on-board 440BX chipset :
umass0: <USB Flash Disk, class 0/0, rev 2.00/2.00, addr 2> on uhub0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <031203 U-Storage 2.00> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: 125MB (256000 512 byte sectors: 64H 32S/T 125C)
umass0: at uhub0 port 1 (addr 2) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: detached
TfH
startup messages on this machine :
FreeBSD 7.0-CURRENT #1: Thu Jun 1 17:18:31 CEST 2006
TTTT at ZZZZ:/files1/obj/files1/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (334.09-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 100663296 (96 MB)
avail memory = 88788992 (84 MB)
MPTable: <OEM00000 PROD00000000>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
sequencer 0 created scp 0xc1453c00
ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
cpu1 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 19 at
device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0x5000-0x500f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
....
more startup messages
More information about the freebsd-usb
mailing list