umass0 choking on 4in1 flashcard reader
Hans Nieser
h.nieser at gmail.com
Thu Jan 26 08:36:31 PST 2006
Hi list,
My laptop (Clevo D41EV) has a built-in 4-in-1 flashcard-reader that is
causing me some trouble. Sometimes (I'd say about 50% of the time)
when I boot my laptop with FreeBSD 6.0 on it, umass0 outputs messages
such as:
umass0: BBB reset failed, TIMEOUT
I have a verbose (boot -v) dmesg (unfortunately with the top part
truncated because of the limited console buffer, I assume) attached of
a boot when the problem occurs. Now I don't really care too much about
the flashcard-reader itself, so if it doesn't work; that's fine (I
haven't actually had a chance to test if it works).
The real problem however is that between the dozens of error messages
there seems to be a delay of a few minutes. Booting my laptop when the
issue occurs takes about 2 - 3 hours (!). I don't want to completely
disable umass either however, because I'd like to be able to plug in a
USB storage device every now and then.
On the other hand there is no way to disable this device through the
BIOS, and I have not been able to unplug it physically (tried opening
the laptop but after unscrewing 20+ screws I backed out of it because
I was afraid I'd forget how to put the whole thing back together).
I have looked into USB quirks, but I'm afraid I lack the technical
expertise to apply these. I have tried booting without ACPI, turning
off hyperthreading and all kinds of other BIOS settings, to no avail.
Aside from the verbose dmesg log of when umass choked, I have also
attached a dmesg log of a succesful boot for comparison, along with
pciconf -lv and usbdevs output. (Ignore the re0: errors in the dmesg
logs, I believe that's a seperate issue.) All mirrored at
http://www.nieser.net/files/umass-problem/ incase they don't come
through.
Can anyone help or suggest which USB quirks I could try? (And how to
apply them? since the device doesn't seem to have a specific
model/vendor associated with it.)
-------------- next part --------------
agp0 at pci0:0:0: class=0x060000 card=0x04801558 chip=0x06481039 rev=0x51 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS648MX Host-to-PCI Bridge'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:1:0: class=0x060400 card=0x00000000 chip=0x00031039 rev=0x00 hdr=0x01
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS648FX Virtual PCI to PCI Bridge (AGP)'
class = bridge
subclass = PCI-PCI
isab0 at pci0:2:0: class=0x060100 card=0x00000000 chip=0x00081039 rev=0x14 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS PCI to ISA Bridge (LPC Bridge)'
class = bridge
subclass = PCI-ISA
fwohci0 at pci0:2:3: class=0x0c0010 card=0x04801558 chip=0x70071039 rev=0x00 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS OHCI Compliant FireWire Controller'
class = serial bus
subclass = FireWire
atapci0 at pci0:2:5: class=0x01018a card=0x04801558 chip=0x55131039 rev=0x00 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS5513 EIDE Controller (A,B step)'
class = mass storage
subclass = ATA
none0 at pci0:2:6: class=0x070300 card=0x42011558 chip=0x70131039 rev=0xa0 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS7013 sharp actius rd10 _ modem 56k'
class = simple comms
subclass = generic modem
pcm0 at pci0:2:7: class=0x040100 card=0x04801558 chip=0x70121039 rev=0xa0 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS7013 PCI Audio Accelerator'
class = multimedia
subclass = audio
ohci0 at pci0:3:0: class=0x0c0310 card=0x04801558 chip=0x70011039 rev=0x0f hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS5597/8 Universal Serial Bus Controller'
class = serial bus
subclass = USB
ohci1 at pci0:3:1: class=0x0c0310 card=0x04801558 chip=0x70011039 rev=0x0f hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS5597/8 Universal Serial Bus Controller'
class = serial bus
subclass = USB
ohci2 at pci0:3:2: class=0x0c0310 card=0x04801558 chip=0x70011039 rev=0x0f hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS5597/8 Universal Serial Bus Controller'
class = serial bus
subclass = USB
ehci0 at pci0:3:3: class=0x0c0320 card=0x04801558 chip=0x70021039 rev=0x00 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS7002 USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
re0 at pci0:10:0: class=0x020000 card=0x08001558 chip=0x816910ec rev=0x10 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8169 Gigabit Ethernet Adapter'
class = network
subclass = ethernet
cbb0 at pci0:12:0: class=0x060700 card=0x04801558 chip=0x14101524 rev=0x01 hdr=0x02
vendor = 'ENE Technology Inc'
device = 'CB-1420 CardBus Controller'
class = bridge
subclass = PCI-CardBus
none1 at pci1:0:0: class=0x030000 card=0x05141558 chip=0x4e501002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'Mobility Radeon 9700 (M10 NP) (RV350)'
class = display
subclass = VGA
ral0 at pci2:0:0: class=0x028000 card=0x701a1799 chip=0x02011814 rev=0x01 hdr=0x00
vendor = 'Ralink Technology, Corp'
device = 'Ralink RT2500 802.11 CardBus Reference Card'
class = network
-------------- next part --------------
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00
port 1 powered
port 2 addr 2: full speed, power 160 mA, config 1, PC Camera(0x301b), Z-Star Corp.(0x0ac8), rev 1.00
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00
port 1 addr 2: low speed, power 100 mA, config 1, Optical USB Mouse(0xc016), Logitech(0x046d), rev 3.40
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), SiS(0x0000), rev 1.00
port 1 powered
port 2 powered
port 3 addr 2: high speed, power 500 mA, config 1, USB Storage Device(0xa600), Generic(0x07c4), rev 1.00
port 4 powered
port 5 powered
port 6 powered
-------------- next part --------------
found-> vendor=0x1039, dev=0x7007, revid=0x00
bus=0, slot=2, func=3
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x0c (3000 ns)
intpin=b, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e8000000, size 12, enabled
pcib0: matched entry for 0.2.INTB
pcib0: slot 2 INTB hardwired to IRQ 17
found-> vendor=0x1039, dev=0x5513, revid=0x00
bus=0, slot=2, func=5
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001000, size 4, enabled
found-> vendor=0x1039, dev=0x7013, revid=0xa0
bus=0, slot=2, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=c, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001400, size 8, port disabled
map[14]: type 4, range 32, base 00001080, size 7, enabled
found-> vendor=0x1039, dev=0x7012, revid=0xa0
bus=0, slot=2, func=7
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=c, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001c00, size 8, port disabled
map[14]: type 4, range 32, base 00001800, size 7, enabled
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=11
map[10]: type 1, range 32, base e8001000, size 12, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 20
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=b, irq=9
map[10]: type 1, range 32, base e8002000, size 12, enabled
pcib0: matched entry for 0.3.INTB
pcib0: slot 3 INTB hardwired to IRQ 21
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0010, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=c, irq=9
map[10]: type 1, range 32, base e8003000, size 12, memory disabled
pcib0: matched entry for 0.3.INTC
pcib0: slot 3 INTC hardwired to IRQ 22
found-> vendor=0x1039, dev=0x7002, revid=0x00
bus=0, slot=3, func=3
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e8004000, size 12, memory disabled
found-> vendor=0x10ec, dev=0x8169, revid=0x10
bus=0, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0015, statreg=0x02b0, cachelnsz=4 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00002000, size 8, enabled
map[14]: type 1, range 32, base e8005000, size 8, memory disabled
pcib0: matched entry for 0.10.INTA
pcib0: slot 10 INTA hardwired to IRQ 19
found-> vendor=0x1524, dev=0x1410, revid=0x01
bus=0, slot=12, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
agp0: <SiS 648 host to AGP bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xe8100000-0xe81fffff
pcib1: prefetched decode 0xf0000000-0xf7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4e50, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0203, statreg=0x02b0, cachelnsz=4 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base f0000000, size 27, enabled
pcib1: (null) requested memory range 0xf0000000-0xf7ffffff: good
map[14]: type 4, range 32, base 00009000, size 8, enabled
pcib1: (null) requested I/O range 0x9000-0x90ff: in range
map[18]: type 1, range 32, base e8100000, size 16, enabled
pcib1: (null) requested memory range 0xe8100000-0xe810ffff: good
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
fwohci0: <SiS 7007> mem 0xe8000000-0xe8000fff irq 17 at device 2.3 on pci0
fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8000000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:f5:00:00:14:d7:28
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <SiS 962/963 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1000-0x100f at device 2.5 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <simple comms, generic modem> at device 2.6 (no driver attached)
pcm0: <SiS 7012> port 0x1c00-0x1cff,0x1800-0x187f at device 2.7 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1c00
pcm0: Reserved 0x80 bytes for rid 0x14 type 4 at 0x1800
pcib0: matched entry for 0.2.INTC
pcib0: slot 2 INTC hardwired to IRQ 18
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC650 AC97 Codec (id = 0x414c4720)>
pcm0: Codec features 20 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, reserved 4
pcm0: sndbuf_setmap 1f25e000, 4000; 0xdd637000 -> 1f25e000
pcm0: sndbuf_setmap 1f25a000, 4000; 0xdd63b000 -> 1f25a000
ohci0: <SiS 5571 USB controller> mem 0xe8001000-0xe8001fff irq 20 at device 3.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8001000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe8002000-0xe8002fff irq 21 at device 3.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8002000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <SiS 5571 USB controller> mem 0xe8003000-0xe8003fff irq 22 at device 3.2 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8003000
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe8004000-0xe8004fff at device 3.3 on pci0
ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8004000
pcib0: matched entry for 0.3.INTD
pcib0: slot 3 INTD hardwired to IRQ 23
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
umass0: Generic USB Storage Device, rev 2.00/1.00, addr 2
umass0:1:0:-1: Attached to scbus1
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2000
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0x2000-0x20ff mem 0xe8005000-0xe80050ff irq 19 at device 10.0 on pci0
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:90:f5:28:d7:14
re0: [MPSAFE]
cbb0: <ENE CB1410 PCI-CardBus Bridge> at device 12.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.12.INTA
pcib0: slot 12 INTA hardwired to IRQ 18
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x14101524 0x02100007 0x06070001 0x00024000
0x10: 0x80000000 0x020000a0 0x20030200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07400112
0x40: 0x04801558 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x8040d021 0x00000000 0x00000000 0x01001002
0x90: 0x604402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe010001 0x00c08100 0x0000000b 0x0000001f
0xb0: 0x09000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00001003 0x00800080 0x10080400 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ec0: info: new max delay is 330 us
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0067
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x201 0x211 0x201 0x201
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0x201 0x209 0x201 0x201
sio1: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 drq 0 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xdc000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ugen0: Z-Star Corp. PC Camera, rev 1.10/1.00, addr 2
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 100003902 hz
Timecounter "TSC" frequency 3000117456 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
acpi_acad0: acline initialization start
battery0: battery initialization start
acpi_ec0: info: new max delay is 410 us
battery0: battery initialization done, tried 1 times
found-> vendor=0x1814, dev=0x0201, revid=0x01
bus=2, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0410, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=18
powerspec 2 supports D0 D3 current D0
ral0: <Ralink Technology RT2500> mem 0x88000000-0x88001fff irq 18 at device 0.0 on cardbus0
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
ral0: bpf attached
ral0: Ethernet address: 00:11:50:15:ab:f8
ral0: bpf attached
ral0: bpf attached
ral0: [MPSAFE]
ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on SiS 5513 chip
ad0: setting UDMA100 on SiS 5513 chip
ad0: 57231MB <HTS726060M9AT00 MH4OA68A> at ata0-master UDMA100
ad0: 117210240 sectors [116280C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acd0: setting PIO4 on SiS 5513 chip
acd0: setting UDMA33 on SiS 5513 chip
acd0: <QSI CD-RW/DVD-ROM SBW242B/UX51> CDRW drive at ata1 as master
acd0: read 689KB/s (689KB/s) write 172KB/s (4126KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: 120mm data disc
pcm0: measured ac97 link rate at 48010 Hz, will use 48000 Hz
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <GENERIC USB Storage-SMC 014D> Removable Direct Access SCSI-0 device
pass0: Serial Number \^_
pass0: 40.000MB/s transfers
pass1 at umass-sim0 bus 0 target 0 lun 1
pass1: <GENERIC USB Storage-CFC 014D> Removable Direct Access SCSI-0 device
pass1: Serial Number \^_
pass1: 40.000MB/s transfers
pass2 at umass-sim0 bus 0 target 0 lun 2
pass2: <GENERIC USB Storage-MMC 014D> Removable Direct Access SCSI-0 device
pass2: Serial Number \^_
pass2: 40.000MB/s transfers
pass3 at umass-sim0 bus 0 target 0 lun 3
pass3: <GENERIC USB Storage-MSC 014D> Removable Direct Access SCSI-0 device
pass3: Serial Number \^_
pass3: 40.000MB/s transfers
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
GEOM: new disk da3
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 11 (ISA IRQ 11) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <GENERIC USB Storage-SMC 014D> Removable Direct Access SCSI-0 device
da0: Serial Number \^_
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <GENERIC USB Storage-CFC 014D> Removable Direct Access SCSI-0 device
da1: Serial Number \^_
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <GENERIC USB Storage-MMC 014D> Removable Direct Access SCSI-0 device
da2: Serial Number \^_
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(da3:umass-sim0:0:0:3): error 6
(da3:umass-sim0:0:0:3): Unretryable Error
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <GENERIC USB Storage-MSC 014D> Removable Direct Access SCSI-0 device
da3: Serial Number \^_
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
Unretryable error
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
Unretryable error
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
Unretryable error
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
Opened disk da1 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
Unretryable error
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
Unretryable error
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
Unretryable error
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
Opened disk da2 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
Unretryable error
(da3:umass-sim0:0:0:3): error 6
(da3:umass-sim0:0:0:3): Unretryable Error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
Unretryable error
(da3:umass-sim0:0:0:3): error 6
(da3:umass-sim0:0:0:3): Unretryable Error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
Unretryable error
(da3:umass-sim0:0:0:3): error 6
(da3:umass-sim0:0:0:3): Unretryable Error
Opened disk da3 -> 6
Trying to mount root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
re0: 2 link states coalesced
re0: 2 link states coalesced
re0: 2 link states coalesced
re0: 2 link states coalesced
re0: 2 link states coalesced
re0: 2 link states coalesced
re0: 2 link states coalesced
re0: 2 link states coalesced
re0: 2 link states coalesced
re0: 2 link states coalesced
re0: 2 link states coalesced
re0: 2 link states coalesced
re0: 2 link states coalesced
re0: 2 link states coalesced
re0: 2 link states coalesced
re0: link state changed to DOWN
re0: 2 link states coalesced
re0: link state changed to DOWN
re0: 2 link states coalesced
re0: link state changed to DOWN
re0: 2 link states coalesced
re0: link state changed to DOWN
re0: 2 link states coalesced
re0: link state changed to DOWN
re0: link state changed to UP
acpi_ec0: info: new max delay is 440 us
-------------- next part --------------
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001000, size 4, enabled
found-> vendor=0x1039, dev=0x7013, revid=0xa0
bus=0, slot=2, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=c, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001400, size 8, port disabled
map[14]: type 4, range 32, base 00001080, size 7, enabled
found-> vendor=0x1039, dev=0x7012, revid=0xa0
bus=0, slot=2, func=7
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=c, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001c00, size 8, port disabled
map[14]: type 4, range 32, base 00001800, size 7, enabled
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=11
map[10]: type 1, range 32, base e8001000, size 12, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 20
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=b, irq=9
map[10]: type 1, range 32, base e8002000, size 12, enabled
pcib0: matched entry for 0.3.INTB
pcib0: slot 3 INTB hardwired to IRQ 21
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0010, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=c, irq=9
map[10]: type 1, range 32, base e8003000, size 12, memory disabled
pcib0: matched entry for 0.3.INTC
pcib0: slot 3 INTC hardwired to IRQ 22
found-> vendor=0x1039, dev=0x7002, revid=0x00
bus=0, slot=3, func=3
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e8004000, size 12, memory disabled
found-> vendor=0x10ec, dev=0x8169, revid=0x10
bus=0, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0015, statreg=0x02b0, cachelnsz=4 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00002000, size 8, enabled
map[14]: type 1, range 32, base e8005000, size 8, memory disabled
pcib0: matched entry for 0.10.INTA
pcib0: slot 10 INTA hardwired to IRQ 19
found-> vendor=0x1524, dev=0x1410, revid=0x01
bus=0, slot=12, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x06 (1500 ns)
intpin=a, irq=18
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 80000000, size 12, memory disabled
pcib0: matched entry for 0.12.INTA
pcib0: slot 12 INTA hardwired to IRQ 18
agp0: <SiS 648 host to AGP bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xe8100000-0xe81fffff
pcib1: prefetched decode 0xf0000000-0xf7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4e50, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0203, statreg=0x02b0, cachelnsz=4 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base f0000000, size 27, enabled
pcib1: (null) requested memory range 0xf0000000-0xf7ffffff: good
map[14]: type 4, range 32, base 00009000, size 8, enabled
pcib1: (null) requested I/O range 0x9000-0x90ff: in range
map[18]: type 1, range 32, base e8100000, size 16, enabled
pcib1: (null) requested memory range 0xe8100000-0xe810ffff: good
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
fwohci0: <SiS 7007> mem 0xe8000000-0xe8000fff irq 17 at device 2.3 on pci0
fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8000000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:f5:00:00:14:d7:28
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <SiS 962/963 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1000-0x100f at device 2.5 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <simple comms, generic modem> at device 2.6 (no driver attached)
pcm0: <SiS 7012> port 0x1c00-0x1cff,0x1800-0x187f at device 2.7 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1c00
pcm0: Reserved 0x80 bytes for rid 0x14 type 4 at 0x1800
pcib0: matched entry for 0.2.INTC
pcib0: slot 2 INTC hardwired to IRQ 18
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC650 AC97 Codec (id = 0x414c4720)>
pcm0: Codec features 20 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, reserved 4
pcm0: sndbuf_setmap 1f25e000, 4000; 0xdd637000 -> 1f25e000
pcm0: sndbuf_setmap 1f25a000, 4000; 0xdd63b000 -> 1f25a000
ohci0: <SiS 5571 USB controller> mem 0xe8001000-0xe8001fff irq 20 at device 3.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8001000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe8002000-0xe8002fff irq 21 at device 3.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8002000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <SiS 5571 USB controller> mem 0xe8003000-0xe8003fff irq 22 at device 3.2 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8003000
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe8004000-0xe8004fff at device 3.3 on pci0
ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8004000
pcib0: matched entry for 0.3.INTD
pcib0: slot 3 INTD hardwired to IRQ 23
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
umass0: Generic USB Storage Device, rev 2.00/1.00, addr 2
umass0:1:0:-1: Attached to scbus1
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2000
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0x2000-0x20ff mem 0xe8005000-0xe80050ff irq 19 at device 10.0 on pci0
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:90:f5:28:d7:14
re0: [MPSAFE]
cbb0: <ENE CB1410 PCI-CardBus Bridge> mem 0x80000000-0x80000fff irq 18 at device 12.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x14101524 0x02100007 0x06070001 0x00024000
0x10: 0x80000000 0x220000a0 0x20030200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x06400112
0x40: 0x04801558 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x8040d021 0x00000000 0x00000000 0x01001002
0x90: 0x604402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe010001 0x00c00100 0x0000080b 0x0000001f
0xb0: 0x09000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00001003 0x00800080 0x10080400 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ec0: info: new max delay is 120 us
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0067
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x201 0x211 0x201 0x201
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0x201 0x209 0x201 0x201
sio1: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 drq 0 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xdc000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ugen0: Z-Star Corp. PC Camera, rev 1.10/1.00, addr 2
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 100003777 hz
Timecounter "TSC" frequency 3000119960 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
acpi_acad0: acline initialization start
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
found-> vendor=0x1814, dev=0x0201, revid=0x01
bus=2, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0410, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=18
powerspec 2 supports D0 D3 current D0
ral0: <Ralink Technology RT2500> mem 0x88000000-0x88001fff irq 18 at device 0.0 on cardbus0
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
ral0: bpf attached
ral0: Ethernet address: 00:11:50:15:ab:f8
ral0: bpf attached
ral0: bpf attached
ral0: [MPSAFE]
ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on SiS 5513 chip
ad0: setting UDMA100 on SiS 5513 chip
ad0: 57231MB <HTS726060M9AT00 MH4OA68A> at ata0-master UDMA100
ad0: 117210240 sectors [116280C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMacpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
A33 cable=40 wire
acd0: setting PIO4 on SiS 5513 chip
acd0: setting UDMA33 on SiS 5513 chip
acd0: <QSI CD-RW/DVD-ROM SBW242B/UX51> CDRW drive at ata1 as master
acd0: read 689KB/s (689KB/s) write 172KB/s (4126KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: 120mm data disc
pcm0: measured ac97 link rate at 48015 Hz, will use 48000 Hz
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <GENERIC USB Storage-SMC 014D> Removable Direct Access SCSI-0 device
pass0: Serial Number \^_
pass0: 40.000MB/s transfers
pass1 at umass-sim0 bus 0 target 0 lun 1
pass1: <GENERIC USB Storage-CFC 014D> Removable Direct Access SCSI-0 device
pass1: Serial Number \^_
pass1: 40.000MB/s transfers
pass2 at umass-sim0 bus 0 target 0 lun 2
pass2: <GENERIC USB Storage-MMC 014D> Removable Direct Access SCSI-0 device
pass2: Serial Number \^_
pass2: 40.000MB/s transfers
pass3 at umass-sim0 bus 0 target 0 lun 3
pass3: <GENERIC USB Storage-MSC 014D> Removable Direct Access SCSI-0 device
pass3: Serial Number \^_
pass3: 40.000MB/s transfers
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
GEOM: new disk da3
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 11 (ISA IRQ 11) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <GENERIC USB Storage-SMC 014D> Removable Direct Access SCSI-0 device
da0: Serial Number \^_
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <GENERIC USB Storage-CFC 014D> Removable Direct Access SCSI-0 device
da1: Serial Number \^_
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <GENERIC USB Storage-MMC 014D> Removable Direct Access SCSI-0 device
da2: Serial Number \^_
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(da3:umass-sim0:0:0:3): error 6
(da3:umass-sim0:0:0:3): Unretryable Error
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <GENERIC USB Storage-MSC 014D> Removable Direct Access SCSI-0 device
da3: Serial Number \^_
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying Command
acpi_ec0: info: new max delay is 200 us
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): error 5
(da0:umass-sim0:0:0:0): Retries Exausted
Opened disk da0 -> 5
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(da0:umass-sim0:0:0:0): error 5
(da0:umass-sim0:0:0:0): Retries Exausted
Opened disk da0 -> 5
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): error 5
(da1:umass-sim0:0:0:1): Retries Exausted
Opened disk da1 -> 5
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): error 5
(da1:umass-sim0:0:0:1): Retries Exausted
Opened disk da1 -> 5
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da1:umass-sim0:0:0:1): Request completed with CAM_REQ_CMP_ERR
(da1:umass-sim0:0:0:1): error 5
(da1:umass-sim0:0:0:1): Retries Exausted
Opened disk da1 -> 5
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): error 5
(da2:umass-sim0:0:0:2): Retries Exausted
Opened disk da2 -> 5
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): error 5
(da2:umass-sim0:0:0:2): Retries Exausted
Opened disk da2 -> 5
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): Retrying Command
acpi_ec0: info: new max delay is 240 us
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da2:umass-sim0:0:0:2): Request completed with CAM_REQ_CMP_ERR
(da2:umass-sim0:0:0:2): error 5
(da2:umass-sim0:0:0:2): Retries Exausted
Opened disk da2 -> 5
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): error 5
(da3:umass-sim0:0:0:3): Retries Exausted
Opened disk da3 -> 5
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): Retrying Command
acpi_ec0: info: new max delay is 11000 us
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): error 5
(da3:umass-sim0:0:0:3): Retries Exausted
Opened disk da3 -> 5
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): Retrying Command
umass0: BBB reset failed, TIMEOUT
(da3:umass-sim0:0:0:3): Request completed with CAM_REQ_CMP_ERR
(da3:umass-sim0:0:0:3): error 5
(da3:umass-sim0:0:0:3): Retries Exausted
Opened disk da3 -> 5
Trying to mount root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
arp: 192.168.1.1 is on re0 but got reply from 00:04:e2:e2:29:0e on ral0
ral0: link state changed to DOWN
ral0: link state changed to UP
arp: 192.168.1.1 is on re0 but got reply from 00:04:e2:e2:29:0e on ral0
More information about the freebsd-usb
mailing list