usb/93389: Digital Camera Pentax S60 don't work

Demin Alexander support at spectrum.ru
Wed Feb 15 05:40:06 PST 2006 

>Number:         93389
>Category:       usb
>Synopsis:       Digital Camera Pentax S60 don't work
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-usb
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Wed Feb 15 13:40:04 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator:     Demin Alexander
>Release:        FreeBSD 5.5-PRERELEASE i386
>Organization:
Group of companies Spectrum
>Environment:
System: FreeBSD support.spectrum.ru 5.5-PRERELEASE FreeBSD 5.5-PRERELEASE #22: Thu Feb 9 16:38:07 MSK 2006 root at support.spectrum.ru:/usr/obj/usr/src/sys/MYGENERIC i386

FreeBSD 5.5-PRERELEASE #22: Thu Feb  9 16:38:07 MSK 2006
    root at support.spectrum.ru:/usr/obj/usr/src/sys/MYGENERIC
ACPI APIC Table: <AMIINT INTEL845>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2800.12-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 536805376 (511 MB)
avail memory = 515629056 (491 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
netsmb_dev: loaded
acpi0: <AMIINT INTEL845> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce3 Ti 200> mem 0xdd980000-0xdd9fffff,0xd8000000-0xdbffffff,0xde000000-0xdeffffff irq 16 at device 0.0 on pci1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd400-0xd41f irq 16 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd800-0xd81f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xdc00-0xdc1f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem 0xdffffc00-0xdfffffff irq 23 at device 29.7 on pci0
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xbc00-0xbcff mem 0xdfefff00-0xdfefffff irq 18 at device 2.0 on pci3
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:80:48:23:bc:f7
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xb800-0xb87f mem 0xdfeffe80-0xdfeffeff irq 17 at device 5.0 on pci3
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:76:9c:b5:0e
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0xcc00-0xcc3f,0xd000-0xd0ff mem 0xdffff900-0xdffff9ff,0xdffffa00-0xdffffbff irq 17 at device 31.5 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec>
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2800115568 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging unlimited
ad0: 286168MB <ST3300831A/3.01> [581421/16/63] at ata0-master UDMA100
acd0: CDRW <TOSHIBA ODD-DVD SD-R1512/1010> at ata1-master UDMA33
acd1: DVDR <NEC DVD RW ND-3500AG/2.16> at ata1-slave UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TOSHIBA ODD-DVD SD-R1512 1010> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <_NEC DVD_RW ND-3500AG 2.16> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
	
>Description:
This message is displayed after connection digital camera:
umass0: PENTAX product 0x0047, rev 1.10/0.00, addr 2
umass0: 8070i (ATAPI) over CBI with CCI (using CBI); quirks = 0x0002
umass0:2:0:-1: Attached to scbus2
umass0: CBI reset failed, STALLED
umass0: CBI bulk-in stall clear failed, STALLED
umass0: CBI bulk-out stall clear failed, STALLED
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present sks:0x80,0xffff
(probe0:umass-sim0:0:0:0): Unretryable error
	
>How-To-Repeat:
	
>Fix:

	


>Release-Note:
>Audit-Trail:
>Unformatted:

More information about the freebsd-usb mailing list