Genesys GL811USB(ata to usb) set address failed.
Marcin Koziej
creep at desk.pl
Sat Feb 4 08:21:54 PST 2006
Hi.
I have a USB-attached, portable hdd, based on hitachi harddrive and
GL811USB based ATA to USB bridge.
My system is:
FreeBSD 6.1-PRERELEASE #0: Sat Feb 4 13:33:24 CET 2006 (cvsupped today)
My system doesn't seam to recognise the device, when I plug it in.
If at least the device reported its vendor/product, there could be a
quirk to add, but without it, what can i do?
USB_DEBUG:
---device plugged start---
Feb 4 14:10:23 carnivore kernel: ehci_pcd: change=0x08
Feb 4 14:10:24 carnivore kernel: ehci after reset, status=0x00001002
Feb 4 14:10:24 carnivore kernel: ehci_disown: index=3 lowspeed=0
Feb 4 14:10:24 carnivore kernel: uhci_root_ctrl_control type=0xa3
request=00
Feb 4 14:10:24 carnivore kernel: uhci_root_ctrl_control type=0x23
request=01
Feb 4 14:10:24 carnivore kernel: uhci_root_ctrl_control:
UR_CLEAR_PORT_FEATURE port=1 feature=16
Feb 4 14:10:24 carnivore kernel: ehci_pcd: change=0x08
Feb 4 14:10:25 carnivore kernel: uhci_root_ctrl_control type=0x23
request=03
Feb 4 14:10:25 carnivore kernel: uhci port 1 reset, status0 = 0x068a
Feb 4 14:10:25 carnivore kernel: uhci port 1 reset, status1 = 0x049b
Feb 4 14:10:25 carnivore kernel: uhci port 1 iteration 9, status = 0x049f
Feb 4 14:10:25 carnivore kernel: uhci port 1 iteration 8, status = 0x0495
Feb 4 14:10:25 carnivore kernel: uhci port 1 reset, status2 = 0x0495
--repeated sequence:---
Feb 4 14:10:25 carnivore kernel: uhci_root_ctrl_control type=0xa3
request=00
Feb 4 14:10:25 carnivore kernel: uhci_root_ctrl_control type=0x23
request=01
Feb 4 14:10:25 carnivore kernel: uhci_root_ctrl_control:
UR_CLEAR_PORT_FEATURE port=1 feature=20
Feb 4 14:10:25 carnivore kernel: uhci_root_ctrl_control type=0xa3
request=00
Feb 4 14:10:25 carnivore kernel: uhci_open: pipe=0xc417f580, addr=0,
endpt=0 (1)
Feb 4 14:10:25 carnivore kernel: uhci_device_control type=0x00,
request=0x05, wValue=0x0002, wIndex=0x0000 len=0, addr=0, endpt=0
Feb 4 14:10:25 carnivore kernel: uhci_device_control type=0x82,
request=0x00, wValue=0x0000, wIndex=0x0000 len=2, addr=0, endpt=0
Feb 4 14:10:25 carnivore kernel: uhci_device_control type=0x00,
request=0x05, wValue=0x0002, wIndex=0x0000 len=0, addr=0, endpt=0
Feb 4 14:10:25 carnivore kernel: uhci_device_control type=0x82,
request=0x00, wValue=0x0000, wIndex=0x0000 len=2, addr=0, endpt=0
Feb 4 14:10:26 carnivore kernel: uhci_device_control type=0x00,
request=0x05, wValue=0x0002, wIndex=0x0000 len=0, addr=0, endpt=0
Feb 4 14:10:26 carnivore kernel: uhci_device_control type=0x82,
request=0x00, wValue=0x0000, wIndex=0x0000 len=2, addr=0, endpt=0
Feb 4 14:10:26 carnivore kernel: uhci_device_control type=0x00,
request=0x05, wValue=0x0002, wIndex=0x0000 len=0, addr=0, endpt=0
Feb 4 14:10:26 carnivore kernel: uhci_device_control type=0x82,
request=0x00, wValue=0x0000, wIndex=0x0000 len=2, addr=0, endpt=0
Feb 4 14:10:26 carnivore kernel: usb_new_device: set address 2 failed -
trying a port reset
Feb 4 14:10:26 carnivore kernel: uhci_root_ctrl_control type=0x23
request=03
Feb 4 14:10:26 carnivore kernel: uhci port 1 reset, status0 = 0x068a
Feb 4 14:10:26 carnivore kernel: uhci port 1 reset, status1 = 0x049b
Feb 4 14:10:26 carnivore kernel: uhci port 1 iteration 9, status = 0x049f
Feb 4 14:10:26 carnivore kernel: uhci port 1 iteration 8, status = 0x0495
Feb 4 14:10:26 carnivore kernel: uhci port 1 reset, status2 = 0x0495
----same sequence twice---
Feb 4 14:10:29 carnivore kernel: uhci_root_ctrl_control type=0xa3
request=00
Feb 4 14:10:29 carnivore kernel: uhci_root_ctrl_control type=0x23
request=01
Feb 4 14:10:29 carnivore kernel: uhci_root_ctrl_control:
UR_CLEAR_PORT_FEATURE port=1 feature=20
Feb 4 14:10:30 carnivore kernel: uhci_device_control type=0x00,
request=0x05, wValue=0x0002, wIndex=0x0000 len=0, addr=0, endpt=0
Feb 4 14:10:30 carnivore kernel: uhci_device_control type=0x82,
request=0x00, wValue=0x0000, wIndex=0x0000 len=2, addr=0, endpt=0
Feb 4 14:10:30 carnivore kernel: uhci_device_control type=0x00,
request=0x05, wValue=0x0002, wIndex=0x0000 len=0, addr=0, endpt=0
Feb 4 14:10:30 carnivore kernel: uhci_device_control type=0x82,
request=0x00, wValue=0x0000, wIndex=0x0000 len=2, addr=0, endpt=0
Feb 4 14:10:30 carnivore kernel: uhci_device_control type=0x00,
request=0x05, wValue=0x0002, wIndex=0x0000 len=0, addr=0, endpt=0
Feb 4 14:10:30 carnivore kernel: uhci_device_control type=0x82,
request=0x00, wValue=0x0000, wIndex=0x0000 len=2, addr=0, endpt=0
Feb 4 14:10:30 carnivore kernel: usb_new_device: set address 2 failed
Feb 4 14:10:30 carnivore kernel: uhub_explore: usb_new_device failed,
error=SET_ADDR_FAILED
Feb 4 14:10:30 carnivore kernel: uhub1: device problem
(SET_ADDR_FAILED), disabling port 1
Feb 4 14:10:30 carnivore kernel: uhci_root_ctrl_control type=0x23
request=01
Feb 4 14:10:30 carnivore kernel: uhci_root_ctrl_control:
UR_CLEAR_PORT_FEATURE port=1 feature=1
Feb 4 14:10:30 carnivore kernel: uhci_root_ctrl_control type=0xa3
request=00
Feb 4 14:10:30 carnivore last message repeated 2 times
Feb 4 14:11:33 carnivore login: ROOT LOGIN (root) ON ttyv2
Feb 4 14:11:37 carnivore root: mark
---device plug end---
---device unplug start---
Feb 4 14:12:16 carnivore kernel: uhci_root_ctrl_control type=0xa3
request=00
Feb 4 14:12:16 carnivore kernel: uhci_root_ctrl_control type=0x23
request=01
Feb 4 14:12:16 carnivore kernel: uhci_root_ctrl_control:
UR_CLEAR_PORT_FEATURE port=1 feature=17
Feb 4 14:12:16 carnivore kernel: uhci_root_ctrl_control type=0x23
request=01
Feb 4 14:12:16 carnivore kernel: uhci_root_ctrl_control:
UR_CLEAR_PORT_FEATURE port=1 feature=16
Feb 4 14:12:16 carnivore kernel: uhci_root_ctrl_control type=0xa3
request=00
---device unplugged---
A more detailed debug info can be found here:
http://galera.ii.pw.edu.pl/~mkoziej/usb-detailed.txt
My dmesg:
http://galera.ii.pw.edu.pl/~mkoziej/dmesg
Best regards,
Marcin Koziej
More information about the freebsd-usb
mailing list