usb0: host system err in 6.0

[Tao Zhen]

Hi,

I am running 6.0 release on an old ABIT kt7 board and frequently run into usb problems.
The hardware works fine with windows98/linux/fbsd4.11. Here is the dmesg output. Please
help. Thanks a lot.

Tao

FreeBSD 6.0-RELEASE #3: Sat Nov 12 12:25:13 UTC 2005
     root at genesis.my.domain:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) processor (900.04-MHz 686-class CPU)
   Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2
   Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
   AMD Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow+,3DNow>
real memory  = 268369920 (255 MB)
avail memory = 253132800 (241 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VT8371 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 9 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f,0x6000-0x607f on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xa000-0xa00f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 11 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 11 at device 7.3 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.4 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xac00-0xac7f mem 0xeb000000-0xeb00007f irq 11 at device 15.0 on pci0
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:01:03:26:5f:37
xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xb000-0xb03f irq 10 at device 17.0 on pci0
miibus1: <MII bus> on xl1
nsphy0: <DP83840 10/100 media interface> on miibus1
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: Ethernet address: 00:60:08:37:9f:3f
atapci1: <HighPoint HPT370 UDMA100 controller> port 
0xb400-0xb407,0xb800-0xb803,0xbc00-0xbc07,0xc000-0xc003,0xc400-0xc4ff irq 11 at device 19.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcc000-0xcc7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sbc0: <Creative SB AWE64 Gold> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
sbc0: [GIANT-LOCKED]
pcm0: <SB16 DSP 4.16> on sbc0
pcm0: [GIANT-LOCKED]
joy0: <Generic PnP Joystick> at port 0x200-0x207 on isa0
Timecounter "TSC" frequency 900038527 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled
ad0: 29314MB <IBM DTLA-307030 TX4OA50C> at ata0-master UDMA66
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1502/1012> at ata1-master UDMA33
acd1: CDRW <SONY CD-RW CRX215E1/SYS2> at ata1-slave UDMA33
ad4: 29314MB <IBM DTLA-307030 TX4OA50C> at ata2-master UDMA100
ad6: 58644MB <IC35L060AVER07 0 ER6OA44A> at ata3-master UDMA100
Trying to mount root from ufs:/dev/ad6s1a
xl1: link state changed to UP
drm0: <ATI Rage 128 Pro PF (AGP)> port 0x9000-0x90ff mem 0xe4000000-0xe7ffffff,0xe9000000-0xe9003fff irq 10 at device 
0.0 on pci1
info: [drm] AGP at 0xe0000000 64MB
info: [drm] Initialized r128 2.5.0 20030725 on minor 0
umass0: OLYMPUS X-2,C-50Z, rev 1.10/10.14, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <OLYMPUS X-2,C-50Z 1014> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: 250MB (512000 512 byte sectors: 64H 32S/T 250C)
usb0: host system error
usb0: host controller halted