FREEBSD-STABLE 6.0: TIMEOUT errors, SHORT_XFER errors and
SET_ADDR_FAILEd errors. dmesg.txt attached
Christopher Armstrong
carmstrong at fastmail.com.au
Wed Dec 28 15:44:05 PST 2005
I am somewhat new to FreeBSD and it's kernel, so unfortunately I'm not
familiar with configuring it, etc. I come from a Linux background, and
I'm trying to switch to FreeBSD for it's (perceived) stability.
Essentially what is happening is that my USB devices are being detected,
but then an error occurs, and the kernel disables both devices. The
problematic kernel output lines are:
uhub0: port 1, set config at addr 2 failed
uhub0: device problem (SHORT_XFER), disabling port 1
uhub0: device problem (SHORT_XFER), disabling port 2
Running usbdevs reveals that the devices have been
"unplugged/disconnected" by FreeBSD (I think it's turning the power off
to them and pretending they don't exist). There is no device nodes for
the devices listed below in my device layout.
Turning off ACPI, devices connected directly to the Root HUB (i.e. the
motherboard) become visible with device nodes under /dev. Running
dhclient against my usb modem device (cdce0) gives the following error:
cdce0: usb timeout on tx: TIMEOUT
And my usb hub gives "SET_ADDR_FAILED errors after having booted up for
a little while.
I've downloaded the kernel source and tried to have a look myself, but
I'm not a systems programmer, so I would have no idea where to start
making changes or even attach a debugger. I've attached a copy of my
dmesg output, but with
My device layout is as follows
USB Root Hub 0
---> Motorola Surfboard SB5100 modem (this appears to be detected
properly)
---> Generic USB Hub
--------> Logitech USB PS/2 Mouse
--------> Brother HL2040 Printer
USB Root Hub 1
(both ports have no devices connected).
I can confirm that all the devices work correctly under both Windows
2000 and Ubuntu Linux (breezy badger) with a custom compiled 2.6.10
kernel (this is to prevent Linux crashing/segfaulting the USB stack
randomly, a bug I don't know how to trace or fix. There might be an IRQ
conflict).
I think it might be related to having ehci compiled into the kernel (it
would be nice to have it as a module, so I can remove it).
Can anyone recommend what I can start doing to solve this issue? I might
have faulty hardware (not suprisingly), as Linux's usb stack crashes if
I use stock kernels. (Although, Linux uses a different USB stack
implementation).
Thanks
Chris
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005
root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a89000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a89174.
MP Configuration Table version 1.4 found at 0xc00f0d20
Table 'FACP' at 0x2fff3040
Table 'APIC' at 0x2fff5bc0
MADT: Found table at 0x2fff5bc0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <GBT AWRDACPI>
Calibrating clock(s) ... i8254 clock: 1193217 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1675240583 Hz
CPU: AMD Athlon(tm) XP 2000+ (1675.24-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 805240832 (767 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000002f237fff, 778121216 bytes (189971 pages)
avail memory = 778723328 (742 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa1d0
bios32: Entry = 0xfa640 (c00fa640) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xa670
pnpbios: Found PnP BIOS data at 0xc00faff0
pnpbios: Entry = f0000:b020 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GBT AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=700e1022)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00fcc50
PCI-Only Interrupts: 10 11 12
Location Bus Device Pin Link IRQs
slot 1 0 9 A 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 9 B 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 9 C 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 9 D 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 10 A 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 10 B 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 10 C 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 10 D 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 15 A 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 15 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 15 C 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 15 D 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 12 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 12 B 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 12 C 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 12 D 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 13 A 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 13 B 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 13 C 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 13 D 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 16 A 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 16 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 16 C 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 16 D 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 7 0 14 A 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 7 0 14 B 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 7 0 14 C 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 7 0 14 D 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 8 0 17 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 8 0 17 B 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 8 0 17 C 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 8 0 17 D 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 9 1 5 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 9 1 5 B 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 9 1 5 C 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 9 1 5 D 0x05 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x05 3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link1: <ACPI PCI Link LNKB> on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link3: <ACPI PCI Link LNKD> irq 12 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 12 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 12 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f,0x6000-0x607f on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1022, dev=0x700e, revid=0x14
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base d0000000, size 27, enabled
map[14]: type 3, range 32, base e2000000, size 12, enabled
map[18]: type 4, range 32, base 0000d000, size 2, port disabled
found-> vendor=0x1022, dev=0x700f, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0686, revid=0x40
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d400, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x1a
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=12
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d800, size 5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD:0)
ioapic0: Changing trigger for pin 12 to level
ioapic0: Changing polarity for pin 12 to low
pcib0: slot 7 INTD routed to irq 12 via \\_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3038, revid=0x1a
bus=0, slot=7, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=12
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000dc00, size 5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 7 INTD routed to irq 12 via \\_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3057, revid=0x40
bus=0, slot=7, func=4
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e000, size 8, enabled
map[14]: type 1, range 32, base e2001000, size 8, enabled
pcib0: matched entry for 0.10.INTA
pcib0: slot 10 INTA hardwired to IRQ 18
found-> vendor=0x1102, dev=0x0002, revid=0x0a
bus=0, slot=15, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=12
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e400, size 5, enabled
pcib0: matched entry for 0.15.INTA
pcib0: slot 15 INTA hardwired to IRQ 19
found-> vendor=0x1102, dev=0x7002, revid=0x0a
bus=0, slot=15, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e800, size 3, enabled
agp0: <AMD 761 host to AGP bridge> port 0xd000-0xd003 mem 0xd0000000-0xd7ffffff,0xe2000000-0xe2000fff at device 0.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xe2000000
agp0: allocating GATT for aperture of size 128M
agp0: gatt -> ag_pdir 0x235000
agp0: allocating GATT for 32768 AGP page entries
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xe0000000-0xe1ffffff
pcib1: prefetched decode 0xd8000000-0xdfffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x10de, dev=0x0281, revid=0xa1
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e0000000, size 24, enabled
pcib1: (null) requested memory range 0xe0000000-0xe0ffffff: good
map[14]: type 3, range 32, base d8000000, size 27, enabled
pcib1: (null) requested memory range 0xd8000000-0xdfffffff: good
pcib0: matched entry for 0.1.INTB
pcib0: slot 1 INTB hardwired to IRQ 16
pcib1: slot 5 INTA is routed to irq 16
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd400-0xd40f at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd400
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1: stat0=0x90 err=0x01 lsb=0x14 msb=0xeb
ata1: stat0=0x90 err=0x01 lsb=0x14 msb=0xeb
ata1: stat0=0x90 err=0x01 lsb=0x14 msb=0xeb
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=10 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 12 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 12 at device 7.3 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 7.4 (no driver attached)
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe000
rl0: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem 0xe2001000-0xe20010ff irq 18 at device 10.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:08:a1:28:5d:e8
rl0: [MPSAFE]
pci0: <multimedia, audio> at device 15.0 (no driver attached)
pci0: <input device> at device 15.1 (no driver attached)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0xc001 0xc011 0xc001 0xc001
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0xc001 0xc009 0xc001 0xc001
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
uhub0: port 1, set config at addr 2 failed
uhub0: device problem (SHORT_XFER), disabling port 1
uhub0: device problem (SHORT_XFER), disabling port 2
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 134018738 hz
Timecounter "TSC" frequency 1675240583 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on VIA 82C686B chip
ad0: setting UDMA100 on VIA 82C686B chip
ad0: 76319MB <Seagate ST380021A 3.75> at ata0-master UDMA100
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
ad0: VIA check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ad1: setting PIO4 on VIA 82C686B chip
ad1: setting UDMA100 on VIA 82C686B chip
ad1: 190782MB <Seagate ST3200826A 3.03> at ata0-slave UDMA100
ad1: 390721968 sectors [6201936C/1H/63S] 16 sectors/interrupt 1 depth queue
ad1: VIA check1 failed
ad1: Adaptec check1 failed
ad1: LSI (v3) check1 failed
ad1: LSI (v2) check1 failed
ad1: FreeBSD check1 failed
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on VIA 82C686B chip
acd0: setting UDMA33 on VIA 82C686B chip
acd0: <LITE-ON DVDRW LDW-451S/GSB7> DVDR drive at ata1 as master
acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm data disc
acd1: setting PIO4 on VIA 82C686B chip
acd1: setting UDMA33 on VIA 82C686B chip
acd1: <LITEON DVD-ROM LTD163D/GHR3> DVDROM drive at ata1 as slave
acd1: 128KB buffer, UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd1: Writes:
acd1: Audio: play, 256 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
ATA PseudoRAID loaded
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
GEOM: new disk ad0
GEOM: new disk ad1
Trying to mount root from ufs:/dev/ad1s1a
start_init: trying /sbin/init
Linux ELF exec handler installed
More information about the freebsd-usb
mailing list